# PicoRV32 example for ECP5-EVN board | |
This is a port of the soc-versa5g for the ECP5-EVN board. | |
## Clock | |
This example uses the 12Mhz FTDI clock as input for the PLL and gives a 50Mhz clock | |
for the CPU and UART. | |
This clock is output on Pin A19 for verification purposes | |
## UART | |
By default, the UART is not hooked up to the FTDI. | |
To make the UART work, you need to solder the following zero-ohm resistors: | |
* R34 | |
* R35 | |
* R21 (Optional for UART Activity LED) | |