| # [Zynq Harnesses](.) |
| |
| Current using Project X-Ray requires a bitstream "harness" which connects IO |
| into the ROI. |
| |
| Once you have the "harness" bitstream, you can place and route designs using |
| only open source tools despite Project X-Ray still not understand how to |
| configure the complete bitstream and IO tiles. |
| |
| --- |
| |
| # Boards |
| |
| Currently supported boards are listed below, they are; |
| * [Zybo Z7-10](#Zybo%2Z7-10) |
| |
| ## [Zybo Z7-10](zybo) |
| |
| * FPGA Part: `XC7Z010-1CLG400C` |
| * Cost: $USD 199.00 |
| * [Buy Zybo Z7 from Digilent](https://store.digilentinc.com/zybo-z7-zynq-7000-arm-fpga-soc-development-board/) |
| |
| **Only** the Zybo Z7-10 version of the board is currently supported. |
| |
| Both the original Zybo and the Zybo Z7-20 are **not** supported. |
| |
| |
| Description from the [Digilent website](https://store.digilentinc.com/zybo-z7-zynq-7000-arm-fpga-soc-development-board/); |
| > The Zybo Z7 is a feature-rich, ready-to-use embedded software and digital |
| > circuit development board built around the Xilinx Zynq-7000 family. This is |
| > the second generation update to the popular Zybo that was released in 2012. |
| > The Zynq family is based on the Xilinx All Programmable System-on-Chip (AP |
| > SoC) architecture, which tightly integrates a dual-core ARM Cortex-A9 |
| > processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. |
| > The Zybo Z7 surrounds the Zynq with a rich set of multimedia and connectivity |
| > peripherals to create a formidable single-board computer, even before |
| > considering the flexibility and power added by the FPGA. The Zybo Z7's |
| > video-capable feature set, including a MIPI CSI-2 compatible Pcam connector, |
| > HDMI input, HDMI output, and high DDR3L bandwidth, was chosen to make it an |
| > affordable solution for the high end embedded vision applications that Xilinx |
| > FPGAs are popular for. Attaching additional hardware is made easy by the Zybo |
| > Z7's Pmod connectors, allowing access to Digilent's catalog of over 70 Pmod |
| > peripheral boards, including motor controllers, sensors, displays, and more. |
| |
| Supported harness configurations; |
| * [SWBUT](#swbut) |
| |
| --- |
| |
| # Configurations |
| |
| Currently supported boards are listed below, they are; |
| * [SWBUT](#swbut) |
| * [PMOD](#pmod) |
| |
| ## SWBUT |
| |
| Harness which maps a board's switches, buttons and LEDs into the region of |
| interest (plus clock). |
| |
| Supported boards; |
| * [Arty A7-35T](../../artix7/harness/README.md#Arty%20A7-35T) |
| * [Basys 3](../../artix7/harness/README.md#Basys%203) |
| * [Zybo Z7-10](#Zybo%2Z7-10) |
| |
| ## PMOD |
| |
| Harness which maps a board's PMOD connectors into the region of interest (plus |
| a clock). |
| |
| Supported boards; |
| * [Arty A7-35T](../../artix7/harness/README.md#Arty%20A7-35T) |
| |
