diff --git a/examples/fpga/artya7/rtl/top_artya7.sv b/examples/fpga/artya7/rtl/top_artya7.sv
index c26ca45..be19828 100644
--- a/examples/fpga/artya7/rtl/top_artya7.sv
+++ b/examples/fpga/artya7/rtl/top_artya7.sv
@@ -11,7 +11,7 @@ module top_artya7 (
   parameter int          MEM_SIZE     = 64 * 1024; // 64 kB
   parameter logic [31:0] MEM_START    = 32'h00000000;
   parameter logic [31:0] MEM_MASK     = MEM_SIZE-1;
-  parameter              SRAMInitFile = "";
+  parameter              SRAMInitFile = "led.vmem";
 
   logic clk_sys, rst_sys_n;
 
diff --git a/shared/rtl/fpga/xilinx/clkgen_xil7series.sv b/shared/rtl/fpga/xilinx/clkgen_xil7series.sv
index e41b4b0..f253c07 100644
--- a/shared/rtl/fpga/xilinx/clkgen_xil7series.sv
+++ b/shared/rtl/fpga/xilinx/clkgen_xil7series.sv
@@ -40,7 +40,7 @@ module clkgen_xil7series (
     .CLKOUT4             (),
     .CLKOUT5             (),
      // Input clock control
-    .CLKFBIN             (clk_fb_buf),
+    .CLKFBIN             (clk_fb_unbuf),
     .CLKIN1              (io_clk_buf),
     .CLKIN2              (1'b0),
      // Tied to always select the primary input clock
@@ -59,12 +59,6 @@ module clkgen_xil7series (
     // Do not reset PLL on external reset, otherwise ILA disconnects at a reset
     .RST                 (1'b0));
 
-  // output buffering
-  BUFG clk_fb_bufg (
-    .I (clk_fb_unbuf),
-    .O (clk_fb_buf)
-  );
-
   BUFG clk_50_bufg (
     .I (clk_50_unbuf),
     .O (clk_50_buf)
diff --git a/vendor/lowrisc_ip/prim/rtl/prim_lfsr.sv b/vendor/lowrisc_ip/prim/rtl/prim_lfsr.sv
index cf35642..3b60d04 100644
--- a/vendor/lowrisc_ip/prim/rtl/prim_lfsr.sv
+++ b/vendor/lowrisc_ip/prim/rtl/prim_lfsr.sv
@@ -299,7 +299,7 @@ module prim_lfsr #(
   ////////////////
   // Galois XOR //
   ////////////////
-  if (64'(LfsrType) == 64'("GAL_XOR")) begin : gen_gal_xor
+  if (LfsrType == "GAL_XOR") begin : gen_gal_xor
 
     // if custom polynomial is provided
     if (CustomCoeffs > 0) begin : gen_custom
@@ -324,7 +324,7 @@ module prim_lfsr #(
   ////////////////////
   // Fibonacci XNOR //
   ////////////////////
-  end else if (64'(LfsrType) == "FIB_XNOR") begin : gen_fib_xnor
+  end else if (LfsrType == "FIB_XNOR") begin : gen_fib_xnor
 
     // if custom polynomial is provided
     if (CustomCoeffs > 0) begin : gen_custom
@@ -389,7 +389,7 @@ module prim_lfsr #(
     logic state0;
 
     // Galois XOR
-    if (64'(LfsrType) == 64'("GAL_XOR")) begin
+    if (LfsrType == "GAL_XOR") begin
       if (state == 0) begin
         state = DefaultSeed;
       end else begin
@@ -399,7 +399,7 @@ module prim_lfsr #(
         state ^= LfsrDw'(entropy);
       end
     // Fibonacci XNOR
-    end else if (64'(LfsrType) == "FIB_XNOR") begin
+    end else if (LfsrType == "FIB_XNOR") begin
       if (&state) begin
         state = DefaultSeed;
       end else begin
diff --git a/vendor/lowrisc_ip/prim_generic/rtl/prim_generic_clock_gating.sv b/vendor/lowrisc_ip/prim_generic/rtl/prim_generic_clock_gating.sv
index 376c38e..1fb302d 100644
--- a/vendor/lowrisc_ip/prim_generic/rtl/prim_generic_clock_gating.sv
+++ b/vendor/lowrisc_ip/prim_generic/rtl/prim_generic_clock_gating.sv
@@ -11,13 +11,6 @@ module prim_generic_clock_gating (
   output logic clk_o
 );
 
-  // Assume en_i synchronized, if not put synchronizer prior to en_i
-  logic en_latch;
-  always_latch begin
-    if (!clk_i) begin
-      en_latch = en_i | test_en_i;
-    end
-  end
-  assign clk_o = en_latch & clk_i;
+  assign clk_o = clk_i;
 
 endmodule