| # SRL32 initialization test |
| |
| This test checks initialization of SRL32. The register is initialized with a |
| pattern. The SRL is configured to fixed delay of 32, the output Q i connected |
| to input D so the data is looped. |
| |
| This test works on the Basys3 board. |
| |
| LED[15] - Just blinks to verify if the design is alive. |
| LED[14] - Shows random data from the output of one SRL32. |
| LED[13:0] - Individual error indicators for all tested SRL32s. |
| |
| SW[0] - Reset. |
| SW[1] - Chooses between latched and non-latched error indication. |
| SW[2] - Forces and error on all SRL32s. ONCE USED TO CLEAR THE ERROR YOU NEED |
| TO RE-PROGRAM THE BOARD. |
| |
