//
//------------------------------------------------------------------------------
//   Copyright 2007-2010 Mentor Graphics Corporation
//   Copyright 2007-2011 Cadence Design Systems, Inc.
//   Copyright 2010 Synopsys, Inc.
//   All Rights Reserved Worldwide
//
//   Licensed under the Apache License, Version 2.0 (the
//   "License"); you may not use this file except in
//   compliance with the License.  You may obtain a copy of
//   the License at
//
//       http://www.apache.org/licenses/LICENSE-2.0
//
//   Unless required by applicable law or agreed to in
//   writing, software distributed under the License is
//   distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
//   CONDITIONS OF ANY KIND, either express or implied.  See
//   the License for the specific language governing
//   permissions and limitations under the License.
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
//
// CLASS: uvm_event
//
// The uvm_event class is a wrapper class around the SystemVerilog event
// construct.  It provides some additional services such as setting callbacks
// and maintaining the number of waiters.
//
//------------------------------------------------------------------------------

class uvm_event extends uvm_object;

  const static string type_name = "uvm_event";

  local event      m_event;
  local int        num_waiters;
  local bit        on;
  local time       trigger_time=0;
  local uvm_object trigger_data;
  local uvm_event_callback  callbacks[$];

  // Function: new
  //
  // Creates a new event object.

  function new (string name="");
    super.new(name);
  endfunction  


  //---------//
  // waiting //
  //---------//

  // Task: wait_on
  //
  // Waits for the event to be activated for the first time.
  //
  // If the event has already been triggered, this task returns immediately.
  // If ~delta~ is set, the caller will be forced to wait a single delta #0
  // before returning. This prevents the caller from returning before
  // previously waiting processes have had a chance to resume.
  //
  // Once an event has been triggered, it will be remain "on" until the event
  // is <reset>.

  virtual task wait_on (bit delta=0);
    if (on) begin
      if (delta)
        #0;
      return;
    end
    num_waiters++;
    @on;
  endtask


  // Task: wait_off
  //
  // If the event has already triggered and is "on", this task waits for the
  // event to be turned "off" via a call to <reset>.
  //
  // If the event has not already been triggered, this task returns immediately.
  // If ~delta~ is set, the caller will be forced to wait a single delta #0
  // before returning. This prevents the caller from returning before
  // previously waiting processes have had a chance to resume.

  virtual task wait_off (bit delta=0);
    if (!on) begin
      if (delta)
        #0;
      return;
    end
    num_waiters++;
    @on;
  endtask


  // Task: wait_trigger
  //
  // Waits for the event to be triggered. 
  //
  // If one process calls wait_trigger in the same delta as another process
  // calls <trigger>, a race condition occurs. If the call to wait occurs
  // before the trigger, this method will return in this delta. If the wait
  // occurs after the trigger, this method will not return until the next
  // trigger, which may never occur and thus cause deadlock.

  virtual task wait_trigger ();
    num_waiters++;
    @m_event;
  endtask


  // Task: wait_ptrigger
  //
  // Waits for a persistent trigger of the event. Unlike <wait_trigger>, this
  // views the trigger as persistent within a given time-slice and thus avoids
  // certain race conditions. If this method is called after the trigger but
  // within the same time-slice, the caller returns immediately.

  virtual task wait_ptrigger ();
    if (m_event.triggered)
      return;
    num_waiters++;
    @m_event;
  endtask


  // Task: wait_trigger_data
  //
  // This method calls <wait_trigger> followed by <get_trigger_data>.

  virtual task wait_trigger_data (output uvm_object data);
    wait_trigger();
    data = get_trigger_data();
  endtask


  // Task: wait_ptrigger_data
  //
  // This method calls <wait_ptrigger> followed by <get_trigger_data>.

  virtual task wait_ptrigger_data (output uvm_object data);
    wait_ptrigger();
    data = get_trigger_data();
  endtask


  //------------//
  // triggering //
  //------------//

  // Function: trigger
  //
  // Triggers the event, resuming all waiting processes.
  //
  // An optional ~data~ argument can be supplied with the enable to provide
  // trigger-specific information.

  virtual function void trigger (uvm_object data=null);
    int skip;
    skip=0;
    if (callbacks.size()) begin
      for (int i=0;i<callbacks.size();i++) begin
        uvm_event_callback tmp;
        tmp=callbacks[i];
        skip = skip + tmp.pre_trigger(this,data);
      end
    end
    if (skip==0) begin
      ->m_event;
      if (callbacks.size()) begin
        for (int i=0;i<callbacks.size();i++) begin
          uvm_event_callback tmp;
          tmp=callbacks[i];
          tmp.post_trigger(this,data);
        end
      end
      num_waiters = 0;
      on = 1;
      trigger_time = $realtime;
      trigger_data = data;
    end
  endfunction


  // Function: get_trigger_data
  //
  // Gets the data, if any, provided by the last call to <trigger>.

  virtual function uvm_object get_trigger_data ();
    return trigger_data;
  endfunction


  // Function: get_trigger_time
  //
  // Gets the time that this event was last triggered. If the event has not been
  // triggered, or the event has been reset, then the trigger time will be 0.

  virtual function time get_trigger_time ();
    return trigger_time;
  endfunction


  //-------//
  // state //
  //-------//

  // Function: is_on
  //
  // Indicates whether the event has been triggered since it was last reset. 
  //
  // A return of 1 indicates that the event has triggered.

  virtual function bit is_on ();
    return (on == 1);
  endfunction


  // Function: is_off
  //
  // Indicates whether the event has been triggered or been reset.
  //
  // A return of 1 indicates that the event has not been triggered.

  virtual function bit is_off ();
    return (on == 0);
  endfunction


  // Function: reset
  //
  // Resets the event to its off state. If ~wakeup~ is set, then all processes
  // currently waiting for the event are activated before the reset.
  //
  // No callbacks are called during a reset.

  virtual function void reset (bit wakeup=0);
    event e;
    if (wakeup)
      ->m_event;
    m_event = e;
    num_waiters = 0;
    on = 0;
    trigger_time = 0;
    trigger_data = null;
  endfunction


  //-----------//
  // callbacks //
  //-----------//

  // Function: add_callback
  //
  // Registers a callback object, ~cb~, with this event. The callback object
  // may include pre_trigger and post_trigger functionality. If ~append~ is set
  // to 1, the default, ~cb~ is added to the back of the callback list. Otherwise,
  // ~cb~ is placed at the front of the callback list.

  virtual function void add_callback (uvm_event_callback cb, bit append=1);
    for (int i=0;i<callbacks.size();i++) begin
      if (cb == callbacks[i]) begin
        uvm_report_warning("CBRGED","add_callback: Callback already registered. Ignoring.", UVM_NONE);
        return;
      end
    end
    if (append)
      callbacks.push_back(cb);
    else
      callbacks.push_front(cb);
  endfunction


  // Function: delete_callback
  //
  // Unregisters the given callback, ~cb~, from this event. 
  
  virtual function void delete_callback (uvm_event_callback cb);
    for (int i=0;i<callbacks.size();i++) begin
      if (cb == callbacks[i]) begin
        callbacks.delete(i);
        return;
      end
    end
    uvm_report_warning("CBNTFD", "delete_callback: Callback not found. Ignoring delete request.", UVM_NONE);
  endfunction


  //--------------//
  // waiters list //
  //--------------//

  // Function: cancel
  //
  // Decrements the number of waiters on the event. 
  //
  // This is used if a process that is waiting on an event is disabled or
  // activated by some other means.

  virtual function void cancel ();
    if (num_waiters > 0)
      num_waiters--;
  endfunction


  // Function: get_num_waiters
  //
  // Returns the number of processes waiting on the event.

  virtual function int get_num_waiters ();
    return num_waiters;
  endfunction


  virtual function uvm_object create(string name=""); 
    uvm_event v;
    v=new(name);
    return v;
  endfunction


  virtual function string get_type_name();
    return type_name;
  endfunction


  virtual function void do_print (uvm_printer printer);
    printer.print_int("num_waiters", num_waiters, $bits(num_waiters), UVM_DEC, ".", "int");
    printer.print_int("on", on, $bits(on), UVM_BIN, ".", "bit");
    printer.print_time("trigger_time", trigger_time);
    printer.print_object("trigger_data", trigger_data);
    printer.m_scope.down("callbacks");
    foreach(callbacks[e]) begin
      printer.print_object($sformatf("[%0d]",e), callbacks[e], "[");
    end
    printer.m_scope.up();
  endfunction


  virtual function void do_copy (uvm_object rhs);
    uvm_event e;
    super.do_copy(rhs);
    if(!$cast(e, rhs) || (e==null)) return;
  
    m_event = e.m_event;
    num_waiters = e.num_waiters;
    on = e.on;
    trigger_time = e.trigger_time;
    trigger_data = e.trigger_data;
    callbacks.delete();
    callbacks = e.callbacks;   

  endfunction

endclass : uvm_event