////////////////////////////////////////////////////////////////////////////////
//
// Filename: 	lfsr_fib.v
//
// Project:	DSP Filtering Example Project
//
// Purpose:	
//
// Creator:	Dan Gisselquist, Ph.D.
//		Gisselquist Technology, LLC
//
////////////////////////////////////////////////////////////////////////////////
//
// Copyright (C) 2017-2019, Gisselquist Technology, LLC
//
// This file is part of the DSP filtering set of designs.
//
// The DSP filtering designs are free RTL designs: you can redistribute them
// and/or modify any of them under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation, either version 3 of
// the License, or (at your option) any later version.
//
// The DSP filtering designs are distributed in the hope that they will be
// useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTIBILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser
// General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with these designs.  (It's in the $(ROOT)/doc directory.  Run make
// with no target there if the PDF file isn't present.)  If not, see
// <http://www.gnu.org/licenses/> for a copy.
//
// License:	LGPL, v3, as defined and found on www.gnu.org,
//		http://www.gnu.org/licenses/lgpl.html
//
////////////////////////////////////////////////////////////////////////////////
//
//
`default_nettype	none
//
module	lfsr_fib(i_clk, i_reset, i_ce, i_in, o_bit);
	parameter		LN=8;	// LFSR Register length/polynomial deg
	parameter [(LN-1):0]	TAPS = 8'h2d,
				INITIAL_FILL = { { (LN-1){1'b0}}, 1'b1 };
	//
	input	wire			i_clk, i_reset, i_ce, i_in;
	output	wire			o_bit;

	reg	[(LN-1):0]	sreg;

	initial	sreg = INITIAL_FILL;
	always @(posedge i_clk)
		if (i_reset)
		begin
			sreg <= INITIAL_FILL;
		end else if (i_ce)
		begin
			sreg[(LN-2):0] <= sreg[(LN-1):1];
			sreg[(LN-1)] <= (^(sreg & TAPS)) ^ i_in;
		end

	assign	o_bit = sreg[0];

endmodule