| # Ibex RISC-V Core SoC Example | |
| Please see [examples](https://ibex-core.readthedocs.io/en/latest/examples.html "Ibex User Manual") for a description of this example. | |
| ## Requirements | |
| ### Tools | |
| - RV32 compiler | |
| - srecord | |
| - `fusesoc` and its dependencies | |
| - Xilinx Vivado | |
| ## Build | |
| ### Software | |
| First the software must be built. Go into `examples/sw/led` and call: | |
| ``` | |
| make CC=/path/to/RISC-V-compiler | |
| ``` | |
| The path to the RV32 compiler `/path/to/RISC-V-compiler` depends on the environment. | |
| For example, it can be `riscv32-unknown-elf-gcc` if the binary is available through the `PATH` environment or `/opt/riscv/bin/riscv-none-embed-gcc` if a specific path is used. | |
| This should produce a `led.vmem` file which is used in the synthesises to update the SRAM storage. | |
| ### Hardware | |
| Run the following command at the top level to build the hardware. | |
| ``` | |
| fusesoc --cores-root=. build lowrisc:ibex:top_artya7_100 | |
| ``` | |
| This will create a directory `build` which contains the output files, including | |
| the bitstream. | |
| ## Program | |
| After the board is connected to the computer it can be programmed with: | |
| ``` | |
| fusesoc --cores-root=. pgm lowrisc:ibex:top_artya7_100 | |
| ``` | |
| LED1/LED3 and LED0/LED2 should alternately be on after the FPGA programming is finished. |