SystemVerilog Style Linter

The verible-verilog-lint SV style linter analyzes code for patterns and constructs that are deemed undesirable according to the implemented lint rules. Ideally, each lint rule should reference a passage from an authoritative style guide. The style linter operates on single unpreprocessed files in isolation.

For automatic code-reviews on github, there is a easy to integrate github action available.

The style linter excels at:

• Finding patterns in code that can be expressed in terms of syntax tree or token matching rules.
  • Expressing rules with syntactic context-sensitivity.

Consequences of reading unpreprocessed input:

• Can examine comments.
• Good at examining uses of unexpanded macros.

Currrent limitations:

• No attempt to understand preprocessing conditional branches.
• No semantic analysis (such as connectivity). This requires:
  • preprocessing
  • multi-file analysis
  • abstract syntax tree

Developers

Style lint rule development guide.

Usage

usage: verible-verilog-lint [options] <file> [<file>...]

  Flags from external/com_google_absl/absl/flags/parse.cc:
    --flagfile (comma-separated list of files to load flags from); default: ;
    --fromenv (comma-separated list of flags to set from the environment [use
      'export FLAGS_flag1=value']); default: ;
    --tryfromenv (comma-separated list of flags to try to set from the
      environment if present); default: ;
    --undefok (comma-separated list of flag names that it is okay to specify on
      the command line even if the program does not define a flag with that
      name); default: ;

  Flags from verilog/analysis/verilog_linter.cc:
    --rules (Comma-separated of lint rules to enable. No prefix or a '+' prefix
      enables it, '-' disable it. Configuration values for each rules placed
      after '=' character.); default: ;
    --rules_config (Path to lint rules configuration file. Disables
      --rule_config_search if set.); default: "";
    --rules_config_search (Look for lint rules configuration file
      '.rules.verible_lint' searching upward from the location of each analyzed
      file.); default: false;
    --ruleset ([default|all|none], the base set of rules used by linter);
      default: default;
    --waiver_files (Path to waiver config files (comma-separated). Please refer
      to the README file for information about its format.); default: "";

  Flags from verilog/parser/verilog_parser.cc:
    --verilog_trace_parser (Trace verilog parser); default: false;

  Flags from verilog/tools/lint/verilog_lint.cc:
    --autofix (autofix mode; one of
      [no|patch-interactive|patch|inplace-interactive|inplace|generate-waiver]);
      default: no;
    --autofix_output_file (File to write a patch with autofixes to if
      --autofix=patch or --autofix=patch-interactive or a waiver file if
      --autofix=generate-waiver); default: "";
    --check_syntax (If true, check for lexical and syntax errors, otherwise
      ignore.); default: true;
    --generate_markdown (If true, print the description of every rule formatted
      for the Markdown and exit immediately. Intended for the output to be
      written to a snippet of Markdown.); default: false;
    --help_rules ([all|<rule-name>], print the description of one rule/all rules
      and exit immediately.); default: "";
    --lint_fatal (If true, exit nonzero if linter finds violations.);
      default: true;
    --parse_fatal (If true, exit nonzero if there are any syntax errors.);
      default: true;
    --show_diagnostic_context (prints an additional line on which the diagnostic
      was found,followed by a line with a position marker); default: false;

We recommend each project maintain its own configuration file for convenience and consistency among project members.

Diagnostics

Syntax errors and lint rule findings have the following format:

FILE:LINE:COL: text...

Examples:

path/to/missing-endmodule.sv:3:1: syntax error (unexpected EOF).
path/to/number-as-statement.sv:2:3: syntax error, rejected "123".
path/to/bad-dimensions.sv:114:43: Packed dimension range must be in decreasing order. http://your.style/guide.html#packed-ordering [packed-dimensions-range-ordering]

Lint Rules

User documentation for the lint rules is generated dynamically, and can be found at https://chipsalliance.github.io/verible/verilog_lint.html, or by running verible-verilog-lint --help_rules for text or --generate_markdown. We also provide a Bazel build rule:

# Generating documentation
bazel build :lint_doc

# It will be generated into
bazel-bin/documentation_verible_lint_rules.md

Rule Configuration

The --rules flag allows to enable/disable rules as well as pass configuration to rules that accept them. It accepts a comma-separated list rule names. If prefixed with a - (minus), the rule is disabled. No prefix or a ‘+’ (plus) prefix enables the rule. An optional configuration can be passed after an = assignment. Each name/value is

So rule configurations with parameters looks like this

  --rules=[+-]rule-name="<param>:<paramvalue>;<param2>:<value>",[+-]next-rule...

The following example enables the enum-name-style rule, enables and configures the line-length rule (80 characters length) and disables the no-tabs rule.

verible-verilog-lint --rules=enum-name-style,+line-length=length:80,-no-tabs ...

Some lint rules have multiple parameters, these are separated with semicolon. Since common shells treat semicolon as special character, you have to put the parameters in quotes.

verible-verilog-lint --rules="undersized-binary-literal=hex:true;lint_zero:true" ...

Additionally, the --rules_config flag can be used to read configuration stored in a file. The syntax is the same as above, except the rules can be also separated with the newline character.

Waiving Lint Violations

In-file waiver comments

In the rare circumstance where a line needs to be waived from a particular lint rule, you can use the following waiver comment:

// This example waives the line after the waiver.
// verilog_lint: waive rule-name
The next non-comment line like this one is waived.

// This example waives the same line as the waiver.
This line is waived.  // verilog_lint: waive rule-name

// This example shows accumulation of waivers over multiple lines.
// verilog_lint: waive rule-name-1
// verilog_lint: waive rule-name-2
// Other comments, possibly waivers for other tools.
This line will be waived for both rule-name-1 and rule-name-2.

// This example shows how to waive an entire range of lines.
// verilog_lint: waive-start rule-X
...
All lines in between will be waived for rule-X
...
// verilog_lint: waive-stop rule-X

External waiver files

If you prefer to manage waivers out-of-source, then waiver files may be a suitable option, especially if the use of multiple linters risks cluttering your source with too many lint waiver directives.

The --waiver_files flag accepts a single configuration file or a list of files (comma-separated). Specifying multiple files is equivalent to concatenating the files in order of appearance. By default, the rules are applied to all files, but with --location you can choose to only apply them to filenames matching the location regexp.

The format of this file is as follows:

waive --rule=rule-name-1 --line=10
waive --rule=rule-name-2 --line=5:10
waive --rule=rule-name-3 --regex="^\s*abc$"
waive --rule=rule-name-4 --line=42 --location=".*some_file.*"

The --line flag can be used to specify a single line to apply the waiver to or a line range (separated with the : character). Additionally the --regex flag can be used to dynamically match lines on which a given rule has to be waived. This is especially useful for projects where some of the files are auto-generated.

The name of the rule to waive is at the end of each diagnostic message in [].

These waiver rules can be automatically generated with the AutoFix mode generate-waiver to stdout, or to a waiver file if a path is passed to --autofix_output_file. e.g.

verible-verilog-lint --autofix=generate-waiver --autofix_output_file=violations.waiver ...

Generated waiving rules will follow this format:

waive --rule=<rule_name> --line=<number> --location=<file_name>

Syntax errors

Syntax errors cannot be waived. A common source of syntax errors is if the file is not a standalone Verilog program as defined by the LRM, e.g. a body snippet of a module, class, task, or function. In such cases, the parser can be directed to treat the code as a snippet by selecting a parsing mode, which looks like a comment near the top-of-file like // verilog_syntax: parse-as-module-body.

Automatically fixing trivial violations

Some trivial violations (e.g. trailing spaces or repeated semicolons) can be fixed automatically. The --autofix flag controls the mode in which fixes are presented or applied.

If --autofix_output_file is not given, patch or waiver output is written to stdout.

The interactive modes --autofix=patch-interactive and --autofix=inplace-interactive offer the following actions for each fix:

• y - apply fix
• n - reject fix
• a - apply this and all remaining fixes for violations of this rule
• d - reject this and all remaining fixes for violations of this rule
• A - apply this and all remaining fixes
• D - reject this and all remaining fixes
• p - show fix
• P - show fixes applied so far
• ? - print this help and prompt again

Example interactive session (--autofix=inplace-interactive):