/* This loads and manipulates the routing budgets. The budgets can be set
 * using different algorithms. The user chooses which algorithm to use using
 * the --routing_budgets_algorithm option. The minimax-PERT algorithm [H. Youssef, 
 * R. B. Lin and E. Shragowitz, "Bounds on net delays for VLSI circuits," 
 * in IEEE Transactions on Circuits and Systems II: Analog and Digital Signal 
 * Processing, vol. 39, no. 11, pp. 815-824, Nov 1992.] uses weights
 * and slacks to calculate how much slack to allocate each connection. Slack
 * allocated = slack * weight / max_weight_of_all_paths_through_the_connection.
 * The weight here is the delay of the connection. The other method of slack allocating
 * is to set the max budgets as a scale of the delays by the pin criticality, and setting
 * the min budgets to zero. 
 * This is implemented in order to consider hold time during routing.
 * With these minimum and maximum budgets, a target budget is found using RCV 
 * (R. Fung, V. Betz and W. Chow, "Slack Allocation and Routing to Improve 
 * FPGA Timing While Repairing Short-Path Violations," in IEEE Transactions 
 * on Computer-Aided Design of Integrated Circuits and Systems, vol. 27, no. 4, pp. 686-697, April 2008.)
 * The routing cost function tries to get the delay closest to the target.
 */

#include <algorithm>
#include "vpr_context.h"
#include <fstream>
#include "vpr_error.h"
#include "globals.h"
#include "tatum/util/tatum_assert.hpp"

#include "tatum/timing_analyzers.hpp"
#include "tatum/graph_walkers.hpp"
#include "tatum/analyzer_factory.hpp"

#include "tatum/TimingGraph.hpp"
#include "tatum/TimingConstraints.hpp"
#include "tatum/TimingReporter.hpp"
#include "tatum/timing_paths.hpp"

#include "tatum/delay_calc/FixedDelayCalculator.hpp"

#include "tatum/report/graphviz_dot_writer.hpp"
#include "tatum/base/sta_util.hpp"
#include "tatum/echo_writer.hpp"
#include "tatum/TimingGraphFwd.hpp"
#include "slack_evaluation.h"
#include "tatum/TimingGraphFwd.hpp"

#include "vtr_assert.h"
#include "vtr_log.h"
#include "route_timing.h"
#include "tatum/report/TimingPathFwd.hpp"
#include "tatum/base/TimingType.hpp"
#include "timing_info.h"
#include "tatum/echo_writer.hpp"
#include "path_delay.h"
#include "net_delay.h"
#include "route_budgets.h"

#define SHORT_PATH_EXP 0.5

route_budgets::route_budgets() {
    set = false;
}

route_budgets::~route_budgets() {
    free_budgets();
}

void route_budgets::free_budgets() {
    /*Free associated budget memory if set
      if not set, only free the chunk memory that wasn't used*/
    if (set) {
        free_net_delay(delay_min_budget, &min_budget_delay_ch);
        free_net_delay(delay_max_budget, &max_budget_delay_ch);
        free_net_delay(delay_target, &target_budget_delay_ch);
        free_net_delay(delay_lower_bound, &lower_bound_delay_ch);
        free_net_delay(delay_upper_bound, &upper_bound_delay_ch);
        num_times_congested.clear();
    }
    set = false;
}

void route_budgets::alloc_budget_memory() {
    /*All the budgets are allocated similar to the net delay in order to pass into the delay calculator*/

    delay_min_budget = alloc_net_delay(&min_budget_delay_ch);
    delay_target = alloc_net_delay(&target_budget_delay_ch);
    delay_max_budget = alloc_net_delay(&max_budget_delay_ch);
    delay_lower_bound = alloc_net_delay(&lower_bound_delay_ch);
    delay_upper_bound = alloc_net_delay(&upper_bound_delay_ch);
}

void route_budgets::load_initial_budgets() {
    auto& cluster_ctx = g_vpr_ctx.clustering();

    for (auto net_id : cluster_ctx.clb_nlist.nets()) {
        for (unsigned ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ++ipin) {
            delay_lower_bound[net_id][ipin] = 0;
            delay_upper_bound[net_id][ipin] = 100e-9;

            //before all iterations, delay max budget is equal to the lower bound
            delay_max_budget[net_id][ipin] = delay_lower_bound[net_id][ipin];
            delay_min_budget[net_id][ipin] = delay_lower_bound[net_id][ipin];
        }
    }
}

void route_budgets::load_route_budgets(vtr::vector_map<ClusterNetId, float *> &net_delay,
        std::shared_ptr<SetupTimingInfo> timing_info,
        const IntraLbPbPinLookup& pb_gpin_lookup, t_router_opts router_opts) {

    /*This function loads the routing budgets depending on the option selected by the user
     the default is to use the minimax algorithm. Other options include disabling this feature
     or scale the delay by the criticality*/
    auto& cluster_ctx = g_vpr_ctx.clustering();
    num_times_congested.resize(cluster_ctx.clb_nlist.nets().size(), 0);

    /*if chosen to be disable, never set the budgets*/
    if (router_opts.routing_budgets_algorithm == DISABLE) {
        //disable budgets
        set = false;
        return;
    }

    /*allocate and load memory for budgets*/
    alloc_budget_memory();
    load_initial_budgets();

    /*go to the associated function depending on user input/default settings*/
    if (router_opts.routing_budgets_algorithm == MINIMAX) {
        allocate_slack_using_weights(net_delay, pb_gpin_lookup);
        calculate_delay_targets();
    } else if (router_opts.routing_budgets_algorithm == SCALE_DELAY) {
        allocate_slack_using_delays_and_criticalities(net_delay, timing_info, pb_gpin_lookup, router_opts);
    }
    set = true;
}

void route_budgets::calculate_delay_targets() {
    auto& cluster_ctx = g_vpr_ctx.clustering();
    /*Delay target values are calculated based on the function outlined in the RCV algorithm*/
    for (auto net_id : cluster_ctx.clb_nlist.nets()) {
        for (unsigned ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ipin++) {
            calculate_delay_targets(net_id, ipin);
        }
    }
}

void route_budgets::calculate_delay_targets(ClusterNetId net_id, int ipin) {
    /*Target delay is calculated using equation in the RCV algorithm*/
    delay_target[net_id][ipin] = min(0.5 * (delay_min_budget[net_id][ipin] + delay_max_budget[net_id][ipin]), delay_min_budget[net_id][ipin] + 0.1e-9);
}

void route_budgets::allocate_slack_using_weights(vtr::vector_map<ClusterNetId, float *> &net_delay, const IntraLbPbPinLookup& pb_gpin_lookup) {
    /*The minimax PERT algorithm uses a weight based approach to allocate slack for each connection
     * The formula used where c is a connection is 
     * slack_allocated(c) = (slack(c)*weight(c)/max_weight_of_all_path_through(c)).
     * Weights here are defined as the delay for the connections
     * Values for conditions in the while loops are pulled from the RCV paper*/
    std::shared_ptr<SetupHoldTimingInfo> timing_info = NULL;

    unsigned iteration;
    float max_budget_change;

    /*Preprocessing algorithm in order to consider short paths when setting initial maximum budgets.
     Not necessary unless budgets are really hard to meet*/
    //process_negative_slack_using_minimax();

    iteration = 0;
    max_budget_change = 900e-12;

    /*This allocates long path slack and increases the budgets*/
    while ((iteration > 3 && max_budget_change > 800e-12) || iteration <= 3) {
        timing_info = perform_sta(delay_max_budget);
        max_budget_change = minimax_PERT(timing_info, delay_max_budget, net_delay, pb_gpin_lookup, SETUP, true);

        iteration++;
        if (iteration > 7)
            break;
    }

    /*Set the minimum budgets equal to the maximum budgets*/
    set_min_max_budgets_equal();

    iteration = 0;
    max_budget_change = 900e-12;

    /*Allocate the short path slack to decrease the budgets accordingly*/
    while ((iteration > 3 && max_budget_change > 800e-12) || iteration <= 3) {
        timing_info = perform_sta(delay_min_budget);
        max_budget_change = minimax_PERT(timing_info, delay_min_budget, net_delay, pb_gpin_lookup, HOLD, true);
        iteration++;

        if (iteration > 7)
            break;
    }

    /*Post basic algorithm processing
     *This prevents wasting resources by allowing the minimum budgets to go below 
     * the lower bound so it will reflect absolute minimum delays in order to meet long path timing*/
    iteration = 0;
    max_budget_change = 900e-12;
    float bottom_range = -1e-9;
    while (iteration < 3 && max_budget_change > 800e-12) {
        /*budgets must be in bounds before timing analysis*/
        if (iteration != 0) {
            keep_budget_in_bounds(delay_min_budget);
        }
        timing_info = perform_sta(delay_min_budget);
        max_budget_change = minimax_PERT(timing_info, delay_min_budget, net_delay, pb_gpin_lookup, HOLD, false);
        iteration++;
    }
    /*budgets may go below minimum delay bound to optimize for setup time*/
    keep_budget_above_value(delay_min_budget, bottom_range);
}

void route_budgets::process_negative_slack_using_minimax(vtr::vector_map<ClusterNetId, float *> &net_delay, const IntraLbPbPinLookup& pb_gpin_lookup) {
    /*This function is an optional pre-processing for the maximum budgets.
     This ensures that the short path slacks are also taken into account for the maximum budgets.
     Ensures that maximum budgets will always be above minimum budgets.
     Can be unnecessary for not so strict budgets*/
    unsigned iteration;
    float max_budget_change;
    std::shared_ptr<SetupHoldTimingInfo> timing_info = NULL;

    iteration = 0;
    max_budget_change = 900e-12;
    float second_max_budget_change = 900e-12;

    while (iteration < 7 && max_budget_change > 5e-12) {
        timing_info = perform_sta(delay_max_budget);
        max_budget_change = minimax_PERT(timing_info, delay_max_budget, net_delay, pb_gpin_lookup, HOLD, true, NEGATIVE);

        timing_info = perform_sta(delay_max_budget);
        second_max_budget_change = minimax_PERT(timing_info, delay_max_budget, net_delay, pb_gpin_lookup, SETUP, true, NEGATIVE);
        max_budget_change = max(max_budget_change, second_max_budget_change);

        iteration++;
    }
}

void route_budgets::keep_budget_above_value(vtr::vector_map<ClusterNetId, float *> &temp_budgets, float bottom_range) {
    /*In post processing the minimum delay can go below the lower bound*/
    auto& cluster_ctx = g_vpr_ctx.clustering();
    for (auto net_id : cluster_ctx.clb_nlist.nets()) {
        for (unsigned ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ipin++) {
            temp_budgets[net_id][ipin] = max(temp_budgets[net_id][ipin], bottom_range);
        }
    }
}

void route_budgets::keep_budget_in_bounds(vtr::vector_map<ClusterNetId, float *> &temp_budgets) {
    /*Make sure the budget is between the lower and upper bounds*/
    auto& cluster_ctx = g_vpr_ctx.clustering();
    for (auto net_id : cluster_ctx.clb_nlist.nets()) {
        for (unsigned ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ipin++) {
            keep_budget_in_bounds(temp_budgets, net_id, ipin);
        }
    }
}

void route_budgets::keep_budget_in_bounds(vtr::vector_map<ClusterNetId, float *> &temp_budgets, ClusterNetId net_id, int ipin) {
    /*Make sure the budget is between the lower and upper bounds*/
    temp_budgets[net_id][ipin] = max(temp_budgets[net_id][ipin], delay_lower_bound[net_id][ipin]);
    temp_budgets[net_id][ipin] = min(temp_budgets[net_id][ipin], delay_upper_bound[net_id][ipin]);
}

void route_budgets::keep_min_below_max_budget() {
    /*Minimum budgets should always be below the maximum budgets.
     Make them equal if minimum budget becomes bigger*/
    auto& cluster_ctx = g_vpr_ctx.clustering();
	for (auto net_id : cluster_ctx.clb_nlist.nets()) {
		for (unsigned ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ipin++) {
            if (delay_min_budget[net_id][ipin] > delay_max_budget[net_id][ipin]) {
                delay_max_budget[net_id][ipin] = delay_min_budget[net_id][ipin];
            }
        }
    }
}

void route_budgets::set_min_max_budgets_equal() {
    auto& cluster_ctx = g_vpr_ctx.clustering();
    for (auto net_id : cluster_ctx.clb_nlist.nets()) {
        for (unsigned ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ipin++) {
            delay_min_budget[net_id][ipin] = delay_max_budget[net_id][ipin];
        }
    }
}

float route_budgets::minimax_PERT(std::shared_ptr<SetupHoldTimingInfo> timing_info, vtr::vector_map<ClusterNetId, float *> &temp_budgets,
	vtr::vector_map<ClusterNetId, float *> &net_delay, const IntraLbPbPinLookup& pb_gpin_lookup, analysis_type analysis_type,
        bool keep_in_bounds, slack_allocated_type slack_type) {
    /*This function uses weights to calculate how much slack to allocate to a connection.
     The weights are deteremined by how much delay of the whole path is present in this connection*/
    
    auto& cluster_ctx = g_vpr_ctx.clustering();
    auto& atom_ctx = g_vpr_ctx.atom();

    std::shared_ptr<const tatum::SetupHoldTimingAnalyzer> timing_analyzer = timing_info->setup_hold_analyzer();
    float total_path_delay = 0;
    float path_slack;
    float max_budget_change = 0;
	for (auto net_id : cluster_ctx.clb_nlist.nets()) {
		for (unsigned ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ipin++) {
            AtomPinId atom_pin;

            /*calculate slack, save the pin that has min slack to calculate total path delay*/
            if (analysis_type == HOLD) {
                path_slack = calculate_clb_pin_slack(net_id, ipin, timing_info, pb_gpin_lookup, HOLD, atom_pin);
            } else {
                path_slack = calculate_clb_pin_slack(net_id, ipin, timing_info, pb_gpin_lookup, SETUP, atom_pin);
            }

            tatum::NodeId timing_node = atom_ctx.lookup.atom_pin_tnode(atom_pin);
            total_path_delay = get_total_path_delay(timing_analyzer, analysis_type, timing_node);
            if (total_path_delay == -1) {
                /*Delay node is not valid, leave the budgets as is*/
                continue;
            }

            /*During hold analysis, increase the budgets when there is negative slack.
             During setup analysis, decrease the budgets when there is negative slack*/
            if ((slack_type == NEGATIVE && path_slack < 0) ||
                    (slack_type == POSITIVE && path_slack > 0) ||
                    slack_type == BOTH) {
                if (analysis_type == HOLD) {
                    temp_budgets[net_id][ipin] += -1 * net_delay[net_id][ipin] * path_slack / total_path_delay;
                } else {
                    temp_budgets[net_id][ipin] += net_delay[net_id][ipin] * path_slack / total_path_delay;
                }
                max_budget_change = max(max_budget_change, abs(net_delay[net_id][ipin] * path_slack / total_path_delay));
            }

            /*Budgets need to be between maximum and minimum budgets*/
            if (keep_in_bounds) {
                keep_budget_in_bounds(temp_budgets, net_id, ipin);
            }

        }
    }
    return max_budget_change;
}

float route_budgets::calculate_clb_pin_slack(ClusterNetId net_id, int ipin, std::shared_ptr<SetupHoldTimingInfo> timing_info,
        const IntraLbPbPinLookup& pb_gpin_lookup, analysis_type type, AtomPinId &atom_pin) {
    /*Calculates the slack for the specific clb pin. Takes the minimum slack. Keeps track of the pin
     used in this calculation so it can be used again for getting the total path delay*/
    auto& cluster_ctx = g_vpr_ctx.clustering();
	ClusterBlockId block_id = cluster_ctx.clb_nlist.net_pin_block(net_id, ipin);
    const int pin_index = cluster_ctx.clb_nlist.net_pin_physical_index(net_id, ipin);

    /*There may be multiple atom netlist pins connected to this CLB pin. Iterate through them all*/
    std::vector<AtomPinId> atom_pins = find_clb_pin_connected_atom_pins(block_id, pin_index, pb_gpin_lookup);

    /*Take the minimum of the atom pin slack as the CLB pin slack
     * minimum slack is used since it is guarantee then to be freed from long path problems */
    float clb_min_slack = delay_upper_bound[net_id][ipin];
    for (const AtomPinId pin : atom_pins) {
        if (timing_info->setup_pin_slack(pin) == std::numeric_limits<float>::infinity() && type == SETUP) {
            if (clb_min_slack == delay_upper_bound[net_id][ipin]) {
                atom_pin = pin;
            }
            continue;
        } else if (timing_info->hold_pin_slack(pin) == std::numeric_limits<float>::infinity() && type == HOLD) {
            if (clb_min_slack == delay_upper_bound[net_id][ipin]) {
                if (clb_min_slack == delay_upper_bound[net_id][ipin]) {
                    atom_pin = pin;
                }
            }
            continue;
        } else {
            if (type == HOLD) {
                if (clb_min_slack > timing_info->hold_pin_slack(pin)) {
                    clb_min_slack = timing_info->hold_pin_slack(pin);
                    atom_pin = pin;
                }
            } else {
                if (clb_min_slack > timing_info->setup_pin_slack(pin)) {
                    clb_min_slack = timing_info->setup_pin_slack(pin);
                    atom_pin = pin;
                }
            }
        }
    }

    /*free memory*/
    atom_pins.clear();

    return clb_min_slack;
}

float route_budgets::get_total_path_delay(std::shared_ptr<const tatum::SetupHoldTimingAnalyzer> timing_analyzer,
        analysis_type analysis_type, tatum::NodeId timing_node) {
    /*The total path delay through a connection is calculated using the arrival and required time
     * Arrival time describes how long it took to arrive at this node and thus is the value for the 
     * delay before this node. The required time describes the time it should arrive this node.
     * To get the future path delay, take the required time at the sink of the longest/shortest path
     * and subtract the required time of the current node from it. The combination of the past
     * and future path delays is the total path delay through this connection. Returns a value
     * of -1 if no total path is found*/


    auto arrival_tags = timing_analyzer->setup_tags(timing_node, tatum::TagType::DATA_ARRIVAL);
    auto required_tags = timing_analyzer->setup_tags(timing_node, tatum::TagType::DATA_REQUIRED);

    if (analysis_type == HOLD) {
        arrival_tags = timing_analyzer->hold_tags(timing_node, tatum::TagType::DATA_ARRIVAL);
        required_tags = timing_analyzer->hold_tags(timing_node, tatum::TagType::DATA_REQUIRED);
    }

    /*Check if valid*/
    if (arrival_tags.empty() || required_tags.empty()) {
        return -1;
    }

    /*To get the maximum path delay, we need
     * maximum arrival tag + (maximum sink required time - minimum current required time)*/
    
    auto max_arrival_tag_iter = find_maximum_tag(arrival_tags);
    auto min_required_tag_iter = find_minimum_tag(required_tags);

    auto& timing_ctx = g_vpr_ctx.timing();
    /*If its already a sink node, then the total path is the arrival time*/
    if (timing_ctx.graph->node_type(timing_node) == tatum::NodeType::SINK) {
        return max_arrival_tag_iter->time().value();
    }

    tatum::NodeId sink_node = min_required_tag_iter->origin_node();
    if (sink_node == tatum::NodeId::INVALID()) {
        return -1;
    }

    auto sink_node_tags = timing_analyzer->setup_tags(sink_node, tatum::TagType::DATA_REQUIRED);

    if (analysis_type == HOLD) {
        sink_node_tags = timing_analyzer->hold_tags(sink_node, tatum::TagType::DATA_REQUIRED);
    }

    if (sink_node_tags.empty()) {
        return -1;
    }

    auto max_sink_node_tag_iter = find_maximum_tag(sink_node_tags);


    if (min_required_tag_iter != required_tags.end() && max_arrival_tag_iter != arrival_tags.end()
            && min_required_tag_iter != sink_node_tags.end()) {

        float final_required_time = max_sink_node_tag_iter->time().value();

        float future_path_delay = final_required_time - min_required_tag_iter->time().value();
        float past_path_delay = max_arrival_tag_iter->time().value();

        return past_path_delay + future_path_delay;
    } else {
        return -1;
    }
}

void route_budgets::allocate_slack_using_delays_and_criticalities(vtr::vector_map<ClusterNetId, float *> &net_delay,
        std::shared_ptr<SetupTimingInfo> timing_info,
        const IntraLbPbPinLookup& pb_gpin_lookup, t_router_opts router_opts) {
    /*Simplifies the budget calculation. The pin criticality describes 1-slack ratio
     which is deemed a valid way to arrive at the delay budget for a connection. Thus
     the maximum delay budget = delay through this connection / pin criticality.
     The minimum delay budget is set to 0 to promote finding the fastest path*/

    auto& cluster_ctx = g_vpr_ctx.clustering();
    float pin_criticality;
    for (auto net_id : cluster_ctx.clb_nlist.nets()) {
        for (unsigned ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ipin++) {
            pin_criticality = calculate_clb_net_pin_criticality(*timing_info, pb_gpin_lookup, net_id, ipin);

            /* Pin criticality is between 0 and 1. 
             * Shift it downwards by 1 - max_criticality (max_criticality is 0.99 by default, 
             * so shift down by 0.01) and cut off at 0.  This means that all pins with small 
             * criticalities (<0.01) get criticality 0 and are ignored entirely, and everything 
             * else becomes a bit less critical. This effect becomes more pronounced if 
             * max_criticality is set lower. */
            // VTR_ASSERT(pin_criticality[ipin] > -0.01 && pin_criticality[ipin] < 1.01);
            pin_criticality = max(pin_criticality - (1.0 - router_opts.max_criticality), 0.0);

            /* Take pin criticality to some power (1 by default). */
            pin_criticality = pow(pin_criticality, router_opts.criticality_exp);

            /* Cut off pin criticality at max_criticality. */
            pin_criticality = min(pin_criticality, router_opts.max_criticality);

            delay_min_budget[net_id][ipin] = 0;
            delay_lower_bound[net_id][ipin] = 0;
            delay_upper_bound[net_id][ipin] = 100e-9;

            if (pin_criticality == 0) {
                //prevent invalid division
                delay_max_budget[net_id][ipin] = delay_upper_bound[net_id][ipin];
            } else {
                delay_max_budget[net_id][ipin] = min(net_delay[net_id][ipin] / pin_criticality, delay_upper_bound[net_id][ipin]);
            }
            check_if_budgets_in_bounds(net_id, ipin);
            /*Use RCV algorithm for delay target
            Tend towards minimum to consider short path timing delay more*/
            delay_target[net_id][ipin] = min(0.5 * (delay_min_budget[net_id][ipin] + delay_max_budget[net_id][ipin]), delay_min_budget[net_id][ipin] + 0.1e-9);
        }
    }
}

void route_budgets::check_if_budgets_in_bounds(ClusterNetId net_id, int ipin) {
    /*All budgets need to be between the minimum and maximum bound*/
    VTR_ASSERT_MSG(delay_max_budget[net_id][ipin] >= delay_min_budget[net_id][ipin]
            && delay_lower_bound[net_id][ipin] <= delay_min_budget[net_id][ipin]
            && delay_upper_bound[net_id][ipin] >= delay_max_budget[net_id][ipin]
            && delay_upper_bound[net_id][ipin] >= delay_lower_bound[net_id][ipin],
            "Delay budgets do not fit in delay bounds");
}

void route_budgets::check_if_budgets_in_bounds() {
    auto& cluster_ctx = g_vpr_ctx.clustering();
	for (auto net_id : cluster_ctx.clb_nlist.nets()) {
		for (unsigned ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ipin++) {
            check_if_budgets_in_bounds(net_id, ipin);
        }
    }
}

std::shared_ptr<SetupHoldTimingInfo> route_budgets::perform_sta(vtr::vector_map<ClusterNetId, float *> &temp_budgets) {
    auto& atom_ctx = g_vpr_ctx.atom();
    /*Perform static timing analysis to get the delay and path weights for slack allocation*/
    std::shared_ptr<RoutingDelayCalculator> routing_delay_calc =
            std::make_shared<RoutingDelayCalculator>(atom_ctx.nlist, atom_ctx.lookup, temp_budgets);

    std::shared_ptr<SetupHoldTimingInfo> timing_info = make_setup_hold_timing_info(routing_delay_calc);
    /*Unconstrained nodes should be warned in the main routing function, do not report it here*/
    timing_info->set_warn_unconstrained(false);
    timing_info->update();

    return timing_info;
}

void route_budgets::update_congestion_times(ClusterNetId net_id) {
    /*Calling this function indicates this net is congested in 
     this routing iteration. This vector keeps the number of
     consecutive times this net is congested */
    num_times_congested[net_id]++;
}

void route_budgets::not_congested_this_iteration(ClusterNetId net_id) {
    /*Any time the net is not congested, clear this counter to only
     count the /consecutive/ congested times*/
    num_times_congested[net_id] = 0;
}

void route_budgets::lower_budgets(float delay_decrement) {
    auto& cluster_ctx = g_vpr_ctx.clustering();
    /*Decrease the budgets by a delay increment when the congested times is high enough*/
    for (auto net_id : cluster_ctx.clb_nlist.nets()) {
        if (num_times_congested[net_id] >= 3) {
            for (unsigned ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ipin++) {
                if (delay_min_budget[net_id][ipin] - delay_lower_bound[net_id][ipin] >= 1e-9) {
                    delay_min_budget[net_id][ipin] = delay_min_budget[net_id][ipin] - delay_decrement;
                    keep_budget_in_bounds(delay_min_budget, net_id, ipin);
                }
            }
        }
    }
}

/*Getter functions*/
float route_budgets::get_delay_target(ClusterNetId net_id, int ipin) {
    //cannot get delay from a source
    VTR_ASSERT(ipin);

    return delay_target[net_id][ipin];
}

float route_budgets::get_min_delay_budget(ClusterNetId net_id, int ipin) {
    //cannot get delay from a source
    VTR_ASSERT(ipin);

    return delay_min_budget[net_id][ipin];
}

float route_budgets::get_max_delay_budget(ClusterNetId net_id, int ipin) {
    //cannot get delay from a source
    VTR_ASSERT(ipin);

    return delay_max_budget[net_id][ipin];
}

float route_budgets::get_crit_short_path(ClusterNetId net_id, int ipin) {
    //cannot get delay from a source
    VTR_ASSERT(ipin);
    if (delay_target[net_id][ipin] == 0) {
        return 0;
    }
    return pow(((delay_target[net_id][ipin] - delay_lower_bound[net_id][ipin]) / delay_target[net_id][ipin]), SHORT_PATH_EXP);
}

void route_budgets::print_route_budget() {
    /*Used for debugging. Prints out all the delay budget class variables to an external
     file named route_budgets.txt*/
    auto& cluster_ctx = g_vpr_ctx.clustering();
	unsigned ipin;
    fstream fp;
    fp.open("route_budget.txt", fstream::out | fstream::trunc);

    /* Prints out general info for easy error checking*/
    if (!fp.is_open() || !fp.good()) {
        vpr_throw(VPR_ERROR_OTHER, __FILE__, __LINE__,
                "could not open \"route_budget.txt\" for generating route budget file\n");
    }

    fp << "Minimum Delay Budgets:" << endl;
    for (auto net_id : cluster_ctx.clb_nlist.nets()) {
        fp << endl << "Net: " << size_t(net_id) << "            ";
        for (ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ipin++) {
            fp << delay_min_budget[net_id][ipin] << " ";
        }
    }

    fp << endl << endl << "Maximum Delay Budgets:" << endl;
	for (auto net_id : cluster_ctx.clb_nlist.nets()) {
        fp << endl << "Net: " << size_t(net_id) << "            ";
        for (ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ipin++) {
            fp << delay_max_budget[net_id][ipin] << " ";
        }
    }

    fp << endl << endl << "Target Delay Budgets:" << endl;

	for (auto net_id : cluster_ctx.clb_nlist.nets()) {
        fp << endl << "Net: " << size_t(net_id) << "            ";
        for (ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ipin++) {
            fp << delay_target[net_id][ipin] << " ";
        }
    }

    fp << endl << endl << "Delay lower_bound:" << endl;
    for(auto net_id : cluster_ctx.clb_nlist.nets()) {
        fp << endl << "Net: " << size_t(net_id) << "            ";
        for (ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ipin++) {
            fp << delay_lower_bound[net_id][ipin] << " ";
        }
    }

    fp << endl << endl << "Delay upper_bound:" << endl;
	for (auto net_id : cluster_ctx.clb_nlist.nets()) {
        fp << endl << "Net: " << size_t(net_id) << "            ";
        for (ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ipin++) {
            fp << delay_upper_bound[net_id][ipin] << " ";
        }
    }

    fp.close();
}

void route_budgets::print_temporary_budgets_to_file(vtr::vector_map<ClusterNetId, float *> &temp_budgets) {
    /*Used for debugging. Print one specific budget to an external file called
     temporary_budgets.txt. This can be used to see how the budgets change between
     each minimax PERT iteration*/
    auto& cluster_ctx = g_vpr_ctx.clustering();
	unsigned ipin;
    fstream fp;
    fp.open("temporary_budgets.txt", fstream::out | fstream::trunc);


    fp << "Temporary Budgets:" << endl;
    for (auto net_id : cluster_ctx.clb_nlist.nets()) {
        fp << endl << "Net: " << size_t(net_id) << "            ";
        for (ipin = 1; ipin < cluster_ctx.clb_nlist.net_pins(net_id).size(); ipin++) {
            fp << temp_budgets[net_id][ipin] << " ";
        }
    }
}

bool route_budgets::if_set() {
    /*Returns if the budgets have been loaded yet*/
    return set;
}