/*
 *  yosys -- Yosys Open SYnthesis Suite
 *
 *  Copyright (C) 2012  Clifford Wolf <clifford@clifford.at>
 *
 *  Permission to use, copy, modify, and/or distribute this software for any
 *  purpose with or without fee is hereby granted, provided that the above
 *  copyright notice and this permission notice appear in all copies.
 *
 *  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 *  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 *  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 *  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 *
 */
module VCC (output V);
   assign V = 1'b1;
endmodule // VCC

module GND (output G);
   assign G = 1'b0;
endmodule // GND

/* Altera Cyclone V devices Input Buffer Primitive */
module cyclonev_io_ibuf
  (output o, input i, input ibar);
   assign ibar = ibar;
   assign o    = i;
endmodule // cyclonev_io_ibuf

/* Altera Cyclone V devices Output Buffer Primitive */
module cyclonev_io_obuf
  (output o, input i, input oe);
   assign o  = i;
   assign oe = oe;
endmodule // cyclonev_io_obuf

/* Altera Cyclone V LUT Primitive */
module cyclonev_lcell_comb
  (output combout, cout, sumout, shareout,
   input dataa, datab, datac, datad,
   input datae, dataf, datag, cin,
   input sharein);

   parameter lut_mask      = 64'hFFFFFFFFFFFFFFFF;
   parameter dont_touch    = "off";
   parameter lpm_type      = "cyclonev_lcell_comb";
   parameter shared_arith  = "off";
   parameter extended_lut  = "off";

   // Internal variables
   // Sub mask for fragmented LUTs
   wire [15:0] mask_a, mask_b, mask_c, mask_d;
   // Independent output for fragmented LUTs
   wire        output_0, output_1, output_2, output_3;
   // Extended mode uses mux to define the output
   wire        mux_0, mux_1;
   // Input for hold the shared LUT mode value
   wire        shared_lut_alm;

   // Simulation model of 4-input LUT
   function lut4;
      input [15:0] mask;
      input        dataa, datab, datac, datad;
      reg [7:0]    s3;
      reg [3:0]    s2;
      reg [1:0]    s1;
      begin
         s3   = datad ? mask[15:8] : mask[7:0];
         s2   = datac ?   s3[7:4]  :   s3[3:0];
         s1   = datab ?   s2[3:2]  :   s2[1:0];
         lut4 = dataa ? s1[1] : s1[0];
      end
   endfunction // lut4

   // Simulation model of 5-input LUT
   function lut5;
      input [31:0] mask; // wp-01003.pdf, page 3: "a 5-LUT can be built with two 4-LUTs and a multiplexer.
      input        dataa, datab, datac, datad, datae;
      reg          upper_lut_value;
      reg          lower_lut_value;
      begin
         upper_lut_value = lut4(mask[31:16], dataa, datab, datac, datad);
         lower_lut_value = lut4(mask[15:0], dataa, datab, datac, datad);
         lut5            = (datae) ? upper_lut_value : lower_lut_value;
      end
   endfunction // lut5

   // Simulation model of 6-input LUT
   function lut6;
      input [63:0] mask;
      input        dataa, datab, datac, datad, datae, dataf;
      reg          upper_lut_value;
      reg          lower_lut_value;
      reg          out_0, out_1, out_2, out_3;
      begin
         upper_lut_value = lut5(mask[63:32], dataa, datab, datac, datad, datae);
         lower_lut_value = lut5(mask[31:0], dataa, datab, datac, datad, datae);
         lut6            = (dataf) ?  upper_lut_value : lower_lut_value;
      end
   endfunction // lut6

   assign {mask_a, mask_b, mask_c, mask_d} = {lut_mask[15:0], lut_mask[31:16], lut_mask[47:32], lut_mask[63:48]};
`ifdef ADVANCED_ALM
   always @(*) begin
      if(extended_lut == "on")
        shared_lut_alm = datag;
      else
        shared_lut_alm = datac;
      // Build the ALM behaviour
      out_0 = lut4(mask_a, dataa, datab, datac, datad);
      out_1 = lut4(mask_b, dataa, datab, shared_lut_alm, datad);
      out_2 = lut4(mask_c, dataa, datab, datac, datad);
      out_3 = lut4(mask_d, dataa, datab, shared_lut_alm, datad);
   end
`else
   `ifdef DEBUG
       initial $display("Advanced ALM lut combine is not implemented yet");
   `endif
`endif
endmodule // cyclonev_lcell_comb


/* Altera D Flip-Flop Primitive */
module dffeas
  (output q,
   input d, clk, clrn, prn, ena,
   input asdata, aload, sclr, sload);

   // Timing simulation is not covered
   parameter power_up="dontcare";
   parameter is_wysiwyg="false";

   reg   q_tmp;
   wire  reset;
   reg [7:0] debug_net;

   assign reset       = (prn && sclr && ~clrn && ena);
   assign q           = q_tmp & 1'b1;

   always @(posedge clk, posedge aload) begin
      if(reset)        q_tmp <= 0;
      else q_tmp <= d;
   end
   assign q = q_tmp;

endmodule // dffeas