
// Via http://www.edaplayground.com/s/6/591
// stackoverflow 20556634
// http://stackoverflow.com/questions/20556634/how-can-i-iteratively-create-buses-of-parameterized-size-to-connect-modules-also

// Code your design here
`define macro_args
`define indexed_part_select

module Multiplier_flat #(parameter M = 4, parameter N = 4)(
input [M-1:0] A, //Input A, size M
input [N-1:0] B, //Input B, size N
output [M+N-1:0] P );  //Output P (product), size M+N

/* Calculate LSB using Wolfram Alpha
 N==3 : http://www.wolframalpha.com/input/?i=0%2C+4%2C+9%2C+15%2C+...
 N==4 : http://www.wolframalpha.com/input/?i=0%2C+5%2C+11%2C+18%2C+26%2C+35%2C+...
 N==5 : http://www.wolframalpha.com/input/?i=0%2C+6%2C+13%2C+21%2C+30%2C+...
 */
`ifdef macro_args
// initial $display("Use Macro Args");
`define calc_pp_lsb(n) (((n)-1)*((n)+2*M)/2)
//`define calc_pp_msb(n) (`calc_pp_lsb(n+1)-1)
`define calc_pp_msb(n) ((n**2+(2*M+1)*n-2)/2)
//`define calc_range(n) `calc_pp_msb(n):`calc_pp_lsb(n)
`define calc_pp_range(n) `calc_pp_lsb(n) +: (M+n)

wire [`calc_pp_msb(N):0] PP;
assign PP[`calc_pp_range(1)] = { 1'b0 , { A & {M{B[0]}} } };
assign P = PP[`calc_pp_range(N)];
`elsif indexed_part_select
// initial $display("Use Indexed Part Select");
localparam MSB = (N**2+(2*M+1)*N-2)/2;
wire [MSB:0] PP;
assign PP[M:0] = { 1'b0 , { A & {M{B[0]}} } };
assign P = PP[MSB -: M+N];
`else
// initial $display("Use Worst Case");
localparam MSB = (N**2+(2*M+1)*N-2)/2;
wire [MSB:0] PP;
assign PP[M:0] = { 1'b0 , { A & {M{B[0]}} } };
assign P = PP[MSB : MSB+1-M-N];
`endif

genvar i;
generate
for (i=1; i < N; i=i+1)
begin: addPartialProduct
    wire [M+i-1:0] gA,gB,gS;
    wire Cout;
    assign gA = { A & {M{B[i]}} , {i{1'b0}} };
    `ifdef macro_args
    assign gB = PP[`calc_pp_range(i)];
    assign PP[`calc_pp_range(i+1)] = {Cout,gS};
    `elsif indexed_part_select
    assign gB = PP[(i-1)*(i+2*M)/2 +: M+i];
    assign PP[i*((i+1)+2*M)/2 +: M+i+1] = {Cout,gS};
    `else
    localparam LSB = (i-1)*(i+2*M)/2;
    localparam MSB = (i**2+(2*M+1)*i-2)/2;
    localparam MSB2 = ((i+1)**2+(2*M+1)*(i+1)-2)/2;
    assign gB = PP[MSB : LSB];
    assign PP[ MSB2 : MSB+1] = {Cout,gS};
    `endif
    RippleCarryAdder#(M+i) adder( .A(gA), .B(gB), .S(gS), .Cin (1'b0), .Cout(Cout) );
end
endgenerate

`ifdef macro_args
// Cleanup global space
`undef calc_pp_range
`undef calc_pp_msb
`undef calc_pp_lsb
`endif
endmodule

module Multiplier_2D #(parameter M = 4, parameter N = 4)(
input [M-1:0] A, //Input A, size M
input [N-1:0] B, //Input B, size N
output [M+N-1:0] P );  //Output P (product), size M+N

wire [M+N-1:0] PP [N-1:0];

// Note: bits PP[0][M+N-1:M+1] are never used. Unused bits are optimized out during synthesis
//assign PP[0][M:0] = { {1'b0} , { A & {M{B[0]}} } };
//assign PP[0][M+N-1:M+1] = {(N-1){1'b0}}; // uncomment to make probing readable
assign PP[0] = { {N{1'b0}} , { A & {M{B[0]}} } };
assign P = PP[N-1];

genvar i;
generate
for (i=1; i < N; i=i+1)
begin: addPartialProduct
    wire [M+i-1:0] gA,gB,gS; wire Cout;
    assign gA = { A & {M{B[i]}} , {i{1'b0}} };
    assign gB = PP[i-1][M+i-1:0];
    //assign PP[i][M+i:0] = {Cout,gS};
    //if (i+1<N) assign PP[i][M+N-1:M+i+1] = {(N-i){1'b0}}; // uncomment to make probing readable
    assign PP[i] = { {(N-i){1'b0}}, Cout, gS};
    RippleCarryAdder#(M+i) adder(
    	.A(gA), .B(gB), .S(gS), .Cin(1'b0), .Cout(Cout) );
end
endgenerate

//always@* foreach(S[i]) $display("S[%0d]:%b",i,S[i]);

endmodule

module RippleCarryAdder#(parameter N = 4)(A,B,Cin,S,Cout);

input [N-1:0] A;
input [N-1:0] B;
input Cin;
output [N-1:0] S;
output Cout;
wire [N:0] CC;

assign CC[0] = Cin;
assign Cout = CC[N];
genvar i;
generate
for (i=0; i < N; i=i+1)
begin: addbit
    FullAdder unit(A[i],B[i],CC[i],S[i],CC[i+1]);
end
endgenerate

endmodule

module FullAdder(input A,B,Cin, output wire S,Cout);
assign {Cout,S} = A+B+Cin;
endmodule