// Copyright (C) 2020-2021  The SymbiFlow Authors.
//
// Use of this source code is governed by a ISC-style
// license that can be found in the LICENSE file or at
// https://opensource.org/licenses/ISC
//
// SPDX-License-Identifier:ISC

module \$__QUICKLOGIC_RAMB16K (
    CLK2,
    CLK3,
    A1ADDR,
    A1DATA,
    A1EN,
    B1ADDR,
    B1DATA,
    B1EN
);
  parameter CFG_ABITS = 9;
  parameter CFG_DBITS = 36;
  parameter CFG_ENABLE_B = 4;

  parameter CLKPOL2 = 1;
  parameter CLKPOL3 = 1;
  parameter [16383:0] INIT = 16384'bx;

  input CLK2;
  input CLK3;

  input [CFG_ABITS-1:0] A1ADDR;
  output [CFG_DBITS-1:0] A1DATA;
  input A1EN;

  input [CFG_ABITS-1:0] B1ADDR;
  input [CFG_DBITS-1:0] B1DATA;
  input [CFG_ENABLE_B-1:0] B1EN;

  assign VCC = 1'b1;
  assign GND = 1'b0;

  wire [3:0] DIP, DOP;
  wire [31:0] DI, DO;

  wire [31:0] DOB;
  wire [ 3:0] DOPB;

  wire [ 1:0] WS1_0;
  wire [ 1:0] WS1_1;
  wire [ 1:0] WS2_0;
  wire [ 1:0] WS2_1;

  wire [ 4:0] wen_reg;

  assign wen_reg[4:CFG_ENABLE_B] = 0;
  assign wen_reg[CFG_ENABLE_B-1:0] = B1EN;

  assign A1DATA = DO;
  assign DI = B1DATA;

  if (CFG_DBITS <= 8) begin
    assign WS1_0 = 2'b00;
    assign WS2_0 = 2'b00;
  end else if (CFG_DBITS > 8 && CFG_DBITS <= 16) begin
    assign WS1_0 = 2'b01;
    assign WS2_0 = 2'b01;
  end else if (CFG_DBITS > 16) begin
    assign WS1_0 = 2'b10;
    assign WS2_0 = 2'b10;
  end

  generate
    if (CFG_DBITS <= 16) begin
      ram8k_2x1_cell_macro #(
          `include "pp3_bram_init_32.vh"
      ) _TECHMAP_REPLACE_ (
          .A1_0(B1ADDR),
          .A1_1(GND),
          .A2_0(A1ADDR),
          .A2_1(GND),
          .ASYNC_FLUSH_0(GND),
          .ASYNC_FLUSH_1(GND),
          .ASYNC_FLUSH_S0(GND),
          .ASYNC_FLUSH_S1(GND),
          .CLK1_0(CLK2),
          .CLK1_1(CLK2),
          .CLK1S_0(!CLKPOL2),
          .CLK1S_1(!CLKPOL2),
          .CLK1EN_0(VCC),
          .CLK1EN_1(VCC),
          .CLK2_0(CLK3),
          .CLK2_1(CLK3),
          .CLK2S_0(!CLKPOL3),
          .CLK2S_1(!CLKPOL3),
          .CLK2EN_0(A1EN),
          .CLK2EN_1(A1EN),
          .CONCAT_EN_0(VCC),
          .CONCAT_EN_1(GND),
          .CS1_0(VCC),
          .CS1_1(GND),
          .CS2_0(VCC),
          .CS2_1(GND),
          .DIR_0(GND),
          .DIR_1(GND),
          .FIFO_EN_0(GND),
          .FIFO_EN_1(GND),
          .P1_0(GND),
          .P1_1(GND),
          .P2_0(GND),
          .P2_1(GND),
          .PIPELINE_RD_0(GND),
          .PIPELINE_RD_1(GND),
          .SYNC_FIFO_0(GND),
          .SYNC_FIFO_1(GND),
          .WD_1(GND),
          .WD_0({GND, DI[15:8], GND, DI[7:0]}),
          .WIDTH_SELECT1_0(WS1_0),
          .WIDTH_SELECT1_1(GND),
          .WIDTH_SELECT2_0(WS2_0),
          .WIDTH_SELECT2_1(GND),
          .WEN1_0(wen_reg[1:0]),
          .WEN1_1(wen_reg[3:2]),
          .Almost_Empty_0(),
          .Almost_Empty_1(),
          .Almost_Full_0(),
          .Almost_Full_1(),
          .POP_FLAG_0(),
          .POP_FLAG_1(),
          .PUSH_FLAG_0(),
          .PUSH_FLAG_1(),
          .RD_0({DOP[1], DO[15:8], DOP[0], DO[7:0]}),
          .RD_1(),
          .TEST1A(GND),
          .TEST1B(GND),
          .RMA(4'd0),
          .RMB(4'd0),
          .RMEA(GND),
          .RMEB(GND)
      );
    end else if (CFG_DBITS <= 32) begin
      ram8k_2x1_cell_macro #(
          `include "pp3_bram_init_32.vh"
      ) _TECHMAP_REPLACE_ (
          .A1_0(B1ADDR),
          .A1_1(GND),
          .A2_0(A1ADDR),
          .A2_1(GND),
          .ASYNC_FLUSH_0(GND),
          .ASYNC_FLUSH_1(GND),
          .ASYNC_FLUSH_S0(GND),
          .ASYNC_FLUSH_S1(GND),
          .CLK1_0(CLK2),
          .CLK1_1(CLK2),
          .CLK1S_0(!CLKPOL2),
          .CLK1S_1(!CLKPOL2),
          .CLK1EN_0(VCC),
          .CLK1EN_1(VCC),
          .CLK2_0(CLK3),
          .CLK2_1(CLK3),
          .CLK2S_0(!CLKPOL3),
          .CLK2S_1(!CLKPOL3),
          .CLK2EN_0(A1EN),
          .CLK2EN_1(A1EN),
          .CONCAT_EN_0(VCC),
          .CONCAT_EN_1(GND),
          .CS1_0(VCC),
          .CS1_1(GND),
          .CS2_0(VCC),
          .CS2_1(GND),
          .DIR_0(GND),
          .DIR_1(GND),
          .FIFO_EN_0(GND),
          .FIFO_EN_1(GND),
          .P1_0(GND),
          .P1_1(GND),
          .P2_0(GND),
          .P2_1(GND),
          .PIPELINE_RD_0(GND),
          .PIPELINE_RD_1(GND),
          .SYNC_FIFO_0(GND),
          .SYNC_FIFO_1(GND),
          .WD_1({GND, DI[31:24], GND, DI[23:16]}),
          .WD_0({GND, DI[15:8], GND, DI[7:0]}),
          .WIDTH_SELECT1_0(WS1_0),
          .WIDTH_SELECT1_1(GND),
          .WIDTH_SELECT2_0(WS2_0),
          .WIDTH_SELECT2_1(GND),
          .WEN1_0(wen_reg[1:0]),
          .WEN1_1(wen_reg[3:2]),
          .Almost_Empty_0(),
          .Almost_Empty_1(),
          .Almost_Full_0(),
          .Almost_Full_1(),
          .POP_FLAG_0(),
          .POP_FLAG_1(),
          .PUSH_FLAG_0(),
          .PUSH_FLAG_1(),
          .RD_0({DOP[1], DO[15:8], DOP[0], DO[7:0]}),
          .RD_1({DOP[3], DO[31:24], DOP[2], DO[23:16]}),
          .TEST1A(GND),
          .TEST1B(GND),
          .RMA(4'd0),
          .RMB(4'd0),
          .RMEA(GND),
          .RMEB(GND)
      );
    end else begin
      wire TECHMAP_FAIL = 1'b1;
    end
  endgenerate
endmodule

// ------------------------------------------------------------------------

module \$__QUICKLOGIC_RAMB8K (
    CLK2,
    CLK3,
    A1ADDR,
    A1DATA,
    A1EN,
    B1ADDR,
    B1DATA,
    B1EN
);
  parameter CFG_ABITS = 9;
  parameter CFG_DBITS = 18;
  parameter CFG_ENABLE_B = 2;

  parameter CLKPOL2 = 1;
  parameter CLKPOL3 = 1;
  parameter [8191:0] INIT = 8192'bx;

  input CLK2;
  input CLK3;

  input [CFG_ABITS-1:0] A1ADDR;
  output [CFG_DBITS-1:0] A1DATA;
  input A1EN;

  input [CFG_ABITS-1:0] B1ADDR;
  input [CFG_DBITS-1:0] B1DATA;
  input [CFG_ENABLE_B-1:0] B1EN;

  wire [10:0] A1ADDR_11;
  wire [10:0] B1ADDR_11;

  wire [1:0] DIP, DOP;
  wire [15:0] DI, DO;

  wire [15:0] DOBDO;
  wire [ 1:0] DOPBDOP;

  wire [ 1:0] WS1_0;
  wire [ 1:0] WS1_1;
  wire [ 1:0] WS2_0;
  wire [ 1:0] WS2_1;

  wire [ 2:0] wen_reg;

  assign wen_reg[2:CFG_ENABLE_B] = 0;
  assign wen_reg[CFG_ENABLE_B-1:0] = B1EN;

  assign GND = 1'b0;
  assign VCC = 1'b1;

  assign A1DATA = DO;
  assign DI = B1DATA;

  if (CFG_ABITS == 11) begin
    assign A1ADDR_11[CFG_ABITS-1:0] = A1ADDR;
    assign B1ADDR_11[CFG_ABITS-1:0] = B1ADDR;
  end else begin
    assign A1ADDR_11[10:CFG_ABITS]  = 0;
    assign A1ADDR_11[CFG_ABITS-1:0] = A1ADDR;
    assign B1ADDR_11[10:CFG_ABITS]  = 0;
    assign B1ADDR_11[CFG_ABITS-1:0] = B1ADDR;
  end

  if (CFG_DBITS <= 9) begin
    assign WS1_0 = 2'b00;
    assign WS2_0 = 2'b00;
  end else if (CFG_DBITS > 9 && CFG_DBITS <= 18) begin
    assign WS1_0 = 2'b01;
    assign WS2_0 = 2'b01;
  end else if (CFG_DBITS > 18) begin
    assign WS1_0 = 2'b10;
    assign WS2_0 = 2'b10;
  end

  ram8k_2x1_cell_macro #(
      `include "pp3_bram_init_8_16.vh"
  ) _TECHMAP_REPLACE_ (
      .A1_0(B1ADDR_11),
      .A1_1(GND),
      .A2_0(A1ADDR_11),
      .A2_1(GND),
      .ASYNC_FLUSH_0(GND),
      .ASYNC_FLUSH_1(GND),
      .ASYNC_FLUSH_S0(GND),
      .ASYNC_FLUSH_S1(GND),
      .CLK1_0(CLK2),
      .CLK1_1(GND),
      .CLK1S_0(!CLKPOL2),
      .CLK1S_1(GND),
      .CLK1EN_0(VCC),
      .CLK1EN_1(VCC),
      .CLK2_0(CLK3),
      .CLK2_1(GND),
      .CLK2S_0(!CLKPOL3),
      .CLK2S_1(GND),
      .CLK2EN_0(A1EN),
      .CLK2EN_1(GND),
      .CONCAT_EN_0(GND),
      .CONCAT_EN_1(GND),
      .CS1_0(VCC),
      .CS1_1(GND),
      .CS2_0(VCC),
      .CS2_1(GND),
      .DIR_0(GND),
      .DIR_1(GND),
      .FIFO_EN_0(GND),
      .FIFO_EN_1(GND),
      .P1_0(GND),
      .P1_1(GND),
      .P2_0(GND),
      .P2_1(GND),
      .PIPELINE_RD_0(GND),
      .PIPELINE_RD_1(GND),
      .SYNC_FIFO_0(GND),
      .SYNC_FIFO_1(GND),
      .WD_1(GND),
      .WD_0({GND, DI[15:8], GND, DI[7:0]}),
      .WIDTH_SELECT1_0(WS1_0),
      .WIDTH_SELECT1_1(GND),
      .WIDTH_SELECT2_0(WS2_0),
      .WIDTH_SELECT2_1(GND),
      .WEN1_0(wen_reg[1:0]),
      .WEN1_1(GND),
      .Almost_Empty_0(),
      .Almost_Empty_1(),
      .Almost_Full_0(),
      .Almost_Full_1(),
      .POP_FLAG_0(),
      .POP_FLAG_1(),
      .PUSH_FLAG_0(),
      .PUSH_FLAG_1(),
      .RD_0({DOP[1], DO[15:8], DOP[0], DO[7:0]}),
      .RD_1(),
      .TEST1A(GND),
      .TEST1B(GND),
      .RMA(4'd0),
      .RMB(4'd0),
      .RMEA(GND),
      .RMEB(GND)
  );
endmodule

module RAM_8K_BLK (
    WA,
    RA,
    WD,
    WClk,
    RClk,
    WClk_En,
    RClk_En,
    WEN,
    RD
);

  parameter addr_int 	= 9,
          data_depth_int = 512,
          data_width_int = 18,
          wr_enable_int 	= 2,
          reg_rd_int 	= 0;

  parameter [8191:0] INIT = 8192'bx;
  parameter INIT_FILE = "init.mem";

  input [addr_int-1:0] WA;
  input [addr_int-1:0] RA;
  input WClk, RClk;
  input WClk_En, RClk_En;
  input [wr_enable_int-1:0] WEN;
  input [data_width_int-1:0] WD;
  output [data_width_int-1:0] RD;

  wire VCC, GND;
  wire WClk0_Sel, RClk0_Sel;
  wire WClk1_Sel, RClk1_Sel;

  wire reg_rd0;
  wire reg_rd1;
  wire [10:0] addr_wr0, addr_rd0, addr_wr1, addr_rd1;

  wire [17:0] in_reg0;

  wire [ 2:0] wen_reg0;

  wire [15:0] out_reg0;

  wire [ 1:0] out_par0;

  wire [1:0] WS1_0, WS2_0;
  wire [1:0] WS_GND;

  wire LS, DS, SD, LS_RB1, DS_RB1, SD_RB1;

  wire WD0_SEL, RD0_SEL;
  wire WD1_SEL, RD1_SEL;

  assign VCC = 1'b1;
  assign GND = 1'b0;

  assign WD0_SEL = 1'b1;
  assign RD0_SEL = 1'b1;
  assign WD1_SEL = 1'b0;
  assign RD1_SEL = 1'b0;

  assign WClk0_Sel = 1'b0;
  assign RClk0_Sel = 1'b0;

  assign WClk1_Sel = 1'b0;
  assign RClk1_Sel = 1'b0;

  assign LS = 1'b0;
  assign DS = 1'b0;
  assign SD = 1'b0;
  assign LS_RB1 = 1'b0;
  assign DS_RB1 = 1'b0;
  assign SD_RB1 = 1'b0;

  assign reg_rd0 = reg_rd_int;
  assign WS_GND = 2'b00;

  assign reg_rd1 = 1'b0;

  assign wen_reg0[2:wr_enable_int] = 0;
  assign wen_reg0[wr_enable_int-1:0] = WEN;

  assign addr_wr1 = 11'b0000000000;
  assign addr_rd1 = 11'b0000000000;

  generate

    if (addr_int == 11) begin
      assign addr_wr0[10:0] = WA;
      assign addr_rd0[10:0] = RA;
    end else begin
      assign addr_wr0[10:addr_int]  = 0;
      assign addr_wr0[addr_int-1:0] = WA;
      assign addr_rd0[10:addr_int]  = 0;
      assign addr_rd0[addr_int-1:0] = RA;
    end

    if (data_width_int == 16) begin
      assign in_reg0[data_width_int-1:0] = WD[data_width_int-1:0];
    end else if (data_width_int > 8 && data_width_int < 16) begin
      assign in_reg0[15:data_width_int]  = 0;
      assign in_reg0[data_width_int-1:0] = WD[data_width_int-1:0];
    end else if (data_width_int <= 8) begin
      assign in_reg0[15:data_width_int]  = 0;
      assign in_reg0[data_width_int-1:0] = WD[data_width_int-1:0];
    end

    if (data_width_int <= 8) begin
      assign WS1_0 = 2'b00;
      assign WS2_0 = 2'b00;
    end else if (data_width_int > 8 && data_width_int <= 16) begin
      assign WS1_0 = 2'b01;
      assign WS2_0 = 2'b01;
    end else if (data_width_int > 16) begin
      assign WS1_0 = 2'b10;
      assign WS2_0 = 2'b10;
    end

  endgenerate

  ram8k_2x1_cell_macro #(
      .INIT(INIT)
  ) _TECHMAP_REPLACE_ (
      .A1_0(addr_wr0),
      .A1_1(addr_wr1),
      .A2_0(addr_rd0),
      .A2_1(addr_rd1),
      .ASYNC_FLUSH_0(GND),
      .ASYNC_FLUSH_1(GND),
      .ASYNC_FLUSH_S0(GND),
      .ASYNC_FLUSH_S1(GND),
      .CLK1_0(WClk),
      .CLK1_1(GND),
      .CLK1S_0(WClk0_Sel),
      .CLK1S_1(WClk1_Sel),
      .CLK1EN_0(WClk_En),
      .CLK1EN_1(GND),
      .CLK2_0(RClk),
      .CLK2_1(GND),
      .CLK2S_0(RClk0_Sel),
      .CLK2S_1(RClk1_Sel),
      .CLK2EN_0(RClk_En),
      .CLK2EN_1(GND),
      .CONCAT_EN_0(GND),
      .CONCAT_EN_1(GND),
      .CS1_0(WD0_SEL),
      .CS1_1(WD1_SEL),
      .CS2_0(RD0_SEL),
      .CS2_1(RD1_SEL),
      .DIR_0(GND),
      .DIR_1(GND),
      .FIFO_EN_0(GND),
      .FIFO_EN_1(GND),
      .P1_0(GND),
      .P1_1(GND),
      .P2_0(GND),
      .P2_1(GND),
      .PIPELINE_RD_0(reg_rd0),
      .PIPELINE_RD_1(reg_rd1),
      .SYNC_FIFO_0(GND),
      .SYNC_FIFO_1(GND),
      .WD_1({18{GND}}),
      .WD_0({1'b0, in_reg0[15:8], 1'b0, in_reg0[7:0]}),
      .WIDTH_SELECT1_0(WS1_0),
      .WIDTH_SELECT1_1(WS_GND),
      .WIDTH_SELECT2_0(WS2_0),
      .WIDTH_SELECT2_1(WS_GND),
      .WEN1_0(wen_reg0[1:0]),
      .WEN1_1({2{GND}}),
      .Almost_Empty_0(),
      .Almost_Empty_1(),
      .Almost_Full_0(),
      .Almost_Full_1(),
      .POP_FLAG_0(),
      .POP_FLAG_1(),
      .PUSH_FLAG_0(),
      .PUSH_FLAG_1(),
      .RD_0({out_par0[1], out_reg0[15:8], out_par0[0], out_reg0[7:0]}),
      .RD_1(),
      .SD(SD),
      .SD_RB1(SD_RB1),
      .LS(LS),
      .LS_RB1(LS_RB1),
      .DS(DS),
      .DS_RB1(DS_RB1),
      .TEST1A(GND),
      .TEST1B(GND),
      .RMA(4'd0),
      .RMB(4'd0),
      .RMEA(GND),
      .RMEB(GND)
  );

  assign RD[data_width_int-1 : 0] = out_reg0[data_width_int-1 : 0];

endmodule


module RAM_16K_BLK (
    WA,
    RA,
    WD,
    WClk,
    RClk,
    WClk_En,
    RClk_En,
    WEN,
    RD
);

  parameter addr_int       = 9,
          data_depth_int = 512,
	  data_width_int = 36,
          wr_enable_int  = 4,
	  reg_rd_int 	 = 0;

  parameter [16383:0] INIT = 16384'bx;
  parameter INIT_FILE = "init.mem";

  input [addr_int-1:0] WA;
  input [addr_int-1:0] RA;
  input WClk, RClk;
  input WClk_En, RClk_En;
  input [wr_enable_int-1:0] WEN;
  input [data_width_int-1:0] WD;
  output [data_width_int-1:0] RD;

  wire VCC, GND;

  wire WClk0_Sel, RClk0_Sel;
  wire WClk1_Sel, RClk1_Sel;

  wire reg_rd0;
  wire reg_rd1;
  wire [10:0] addr_wr0, addr_rd0, addr_wr1, addr_rd1;

  wire [31:0] in_reg0;

  wire [ 4:0] wen_reg0;

  wire [31:0] out_reg0;

  wire [ 3:0] out_par0;

  wire [1:0] WS1_0, WS2_0;
  wire [1:0] WS_GND;

  wire LS, DS, SD, LS_RB1, DS_RB1, SD_RB1;

  wire WD0_SEL, RD0_SEL;
  wire WD1_SEL, RD1_SEL;

  assign VCC = 1'b1;
  assign GND = 1'b0;

  assign WD0_SEL = 1'b1;
  assign RD0_SEL = 1'b1;
  assign WD1_SEL = 1'b1;
  assign RD1_SEL = 1'b1;

  assign WClk0_Sel = 1'b0;
  assign RClk0_Sel = 1'b0;

  assign WClk1_Sel = 1'b0;
  assign RClk1_Sel = 1'b0;

  assign LS = 1'b0;
  assign DS = 1'b0;
  assign SD = 1'b0;
  assign LS_RB1 = 1'b0;
  assign DS_RB1 = 1'b0;
  assign SD_RB1 = 1'b0;

  assign reg_rd0 = reg_rd_int;
  assign WS_GND = 2'b00;

  assign reg_rd1 = 1'b0;

  assign wen_reg0[4:wr_enable_int] = 0;
  assign wen_reg0[wr_enable_int-1:0] = WEN;

  assign addr_wr1 = 11'b0000000000;
  assign addr_rd1 = 11'b0000000000;

  generate

    if (addr_int == 11) begin
      assign addr_wr0[10:0] = WA;
      assign addr_rd0[10:0] = RA;
    end else begin
      assign addr_wr0[10:addr_int]  = 0;
      assign addr_wr0[addr_int-1:0] = WA;
      assign addr_rd0[10:addr_int]  = 0;
      assign addr_rd0[addr_int-1:0] = RA;
    end

    if (data_width_int == 32) begin
      assign in_reg0[data_width_int-1:0] = WD[data_width_int-1:0];
    end else if (data_width_int > 8 && data_width_int < 32) begin
      assign in_reg0[31:data_width_int]  = 0;
      assign in_reg0[data_width_int-1:0] = WD[data_width_int-1:0];
    end else if (data_width_int <= 8) begin
      assign in_reg0[31:data_width_int]  = 0;
      assign in_reg0[data_width_int-1:0] = WD[data_width_int-1:0];
    end

    if (data_width_int <= 8) begin
      assign WS1_0 = 2'b00;
      assign WS2_0 = 2'b00;
    end else if (data_width_int > 8 && data_width_int <= 16) begin
      assign WS1_0 = 2'b01;
      assign WS2_0 = 2'b01;
    end else if (data_width_int > 16) begin
      assign WS1_0 = 2'b10;
      assign WS2_0 = 2'b10;
    end

    if (data_width_int <= 16) begin

      ram8k_2x1_cell_macro #(
          .INIT(INIT)
      ) _TECHMAP_REPLACE_ (
          .A1_0(addr_wr0),
          .A1_1(addr_wr1),
          .A2_0(addr_rd0),
          .A2_1(addr_rd1),
          .ASYNC_FLUSH_0(GND),
          .ASYNC_FLUSH_1(GND),
          .ASYNC_FLUSH_S0(GND),
          .ASYNC_FLUSH_S1(GND),
          .CLK1_0(WClk),
          .CLK1_1(WClk),
          .CLK1S_0(WClk0_Sel),
          .CLK1S_1(WClk0_Sel),
          .CLK1EN_0(WClk_En),
          .CLK1EN_1(WClk_En),
          .CLK2_0(RClk),
          .CLK2_1(RClk),
          .CLK2S_0(RClk0_Sel),
          .CLK2S_1(RClk0_Sel),
          .CLK2EN_0(RClk_En),
          .CLK2EN_1(RClk_En),
          .CONCAT_EN_0(VCC),
          .CONCAT_EN_1(GND),
          .CS1_0(WD0_SEL),
          .CS1_1(GND),
          .CS2_0(RD0_SEL),
          .CS2_1(GND),
          .DIR_0(GND),
          .DIR_1(GND),
          .FIFO_EN_0(GND),
          .FIFO_EN_1(GND),
          .P1_0(GND),
          .P1_1(GND),
          .P2_0(GND),
          .P2_1(GND),
          .PIPELINE_RD_0(reg_rd0),
          .PIPELINE_RD_1(GND),
          .SYNC_FIFO_0(GND),
          .SYNC_FIFO_1(GND),
          .WD_1({18{GND}}),
          .WD_0({1'b0, in_reg0[15:8], 1'b0, in_reg0[7:0]}),
          .WIDTH_SELECT1_0(WS1_0),
          .WIDTH_SELECT1_1(WS_GND),
          .WIDTH_SELECT2_0(WS2_0),
          .WIDTH_SELECT2_1(WS_GND),
          .WEN1_0(wen_reg0[1:0]),
          .WEN1_1(wen_reg0[3:2]),
          .Almost_Empty_0(),
          .Almost_Empty_1(),
          .Almost_Full_0(),
          .Almost_Full_1(),
          .POP_FLAG_0(),
          .POP_FLAG_1(),
          .PUSH_FLAG_0(),
          .PUSH_FLAG_1(),
          .RD_0({out_par0[1], out_reg0[15:8], out_par0[0], out_reg0[7:0]}),
          .RD_1(),
          .SD(SD),
          .SD_RB1(SD_RB1),
          .LS(LS),
          .LS_RB1(LS_RB1),
          .DS(DS),
          .DS_RB1(DS_RB1),
          .TEST1A(GND),
          .TEST1B(GND),
          .RMA(4'd0),
          .RMB(4'd0),
          .RMEA(GND),
          .RMEB(GND)
      );
    end else if (data_width_int > 16) begin

      ram8k_2x1_cell_macro #(
          .INIT(INIT)
      ) _TECHMAP_REPLACE_ (
          .A1_0(addr_wr0),
          .A1_1(addr_wr1),
          .A2_0(addr_rd0),
          .A2_1(addr_rd1),
          .ASYNC_FLUSH_0(GND),
          .ASYNC_FLUSH_1(GND),
          .ASYNC_FLUSH_S0(GND),
          .ASYNC_FLUSH_S1(GND),
          .CLK1_0(WClk),
          .CLK1_1(WClk),
          .CLK1S_0(WClk0_Sel),
          .CLK1S_1(WClk0_Sel),
          .CLK1EN_0(WClk_En),
          .CLK1EN_1(WClk_En),
          .CLK2_0(RClk),
          .CLK2_1(RClk),
          .CLK2S_0(RClk0_Sel),
          .CLK2S_1(RClk0_Sel),
          .CLK2EN_0(RClk_En),
          .CLK2EN_1(RClk_En),
          .CONCAT_EN_0(VCC),
          .CONCAT_EN_1(GND),
          .CS1_0(WD0_SEL),
          .CS1_1(GND),
          .CS2_0(RD0_SEL),
          .CS2_1(GND),
          .DIR_0(GND),
          .DIR_1(GND),
          .FIFO_EN_0(GND),
          .FIFO_EN_1(GND),
          .P1_0(GND),
          .P1_1(GND),
          .P2_0(GND),
          .P2_1(GND),
          .PIPELINE_RD_0(reg_rd0),
          .PIPELINE_RD_1(GND),
          .SYNC_FIFO_0(GND),
          .SYNC_FIFO_1(GND),
          .WD_1({1'b0, in_reg0[31:24], 1'b0, in_reg0[23:16]}),
          .WD_0({1'b0, in_reg0[15:8], 1'b0, in_reg0[7:0]}),
          .WIDTH_SELECT1_0(WS1_0),
          .WIDTH_SELECT1_1(WS_GND),
          .WIDTH_SELECT2_0(WS2_0),
          .WIDTH_SELECT2_1(WS_GND),
          .WEN1_0(wen_reg0[1:0]),
          .WEN1_1(wen_reg0[3:2]),
          .Almost_Empty_0(),
          .Almost_Empty_1(),
          .Almost_Full_0(),
          .Almost_Full_1(),
          .POP_FLAG_0(),
          .POP_FLAG_1(),
          .PUSH_FLAG_0(),
          .PUSH_FLAG_1(),
          .RD_0({out_par0[1], out_reg0[15:8], out_par0[0], out_reg0[7:0]}),
          .RD_1({out_par0[3], out_reg0[31:24], out_par0[2], out_reg0[23:16]}),
          .SD(SD),
          .SD_RB1(SD_RB1),
          .LS(LS),
          .LS_RB1(LS_RB1),
          .DS(DS),
          .DS_RB1(DS_RB1),
          .TEST1A(GND),
          .TEST1B(GND),
          .RMA(4'd0),
          .RMB(4'd0),
          .RMEA(GND),
          .RMEB(GND)
      );
    end else begin
      wire TECHMAP_FAIL = 1'b1;
    end

  endgenerate

  assign RD[data_width_int-1 : 0] = out_reg0[data_width_int-1 : 0];

endmodule


module FIFO_8K_BLK (
    DIN,
    Fifo_Push_Flush,
    Fifo_Pop_Flush,
    PUSH,
    POP,
    Push_Clk,
    Pop_Clk,
    Push_Clk_En,
    Pop_Clk_En,
    Fifo_Dir,
    Async_Flush,
    Almost_Full,
    Almost_Empty,
    PUSH_FLAG,
    POP_FLAG,
    DOUT
);

  parameter data_depth_int = 512, data_width_int = 36, reg_rd_int = 0, sync_fifo_int = 0;

  input Fifo_Push_Flush, Fifo_Pop_Flush;
  input Push_Clk, Pop_Clk;
  input PUSH, POP;
  input [data_width_int-1:0] DIN;
  input Push_Clk_En, Pop_Clk_En, Fifo_Dir, Async_Flush;
  output [data_width_int-1:0] DOUT;
  output [3:0] PUSH_FLAG, POP_FLAG;
  output Almost_Full, Almost_Empty;

  wire LS, DS, SD, LS_RB1, DS_RB1, SD_RB1;
  wire VCC, GND;

  wire [10:0] addr_wr, addr_rd;
  wire clk1_sig0, clk2_sig0, clk1_sig_en0, clk2_sig_en0, fifo_clk1_flush_sig0, fifo_clk2_flush_sig0, p1_sig0, p2_sig0,clk1_sig_sel0,clk2_sig_sel0;
  wire reg_rd0, sync_fifo0;
  wire [15:0] in_reg0;
  wire [15:0] out_reg0;
  wire [ 1:0] WS1_0;
  wire [ 1:0] WS2_0;
  wire Push_Clk0_Sel, Pop_Clk0_Sel;
  wire Async_Flush_Sel0;

  wire [1:0] out_par0;

  assign LS = 1'b0;
  assign DS = 1'b0;
  assign SD = 1'b0;
  assign LS_RB1 = 1'b0;
  assign DS_RB1 = 1'b0;
  assign SD_RB1 = 1'b0;

  assign VCC = 1'b1;
  assign GND = 1'b0;

  assign Push_Clk0_Sel  	= 1'b0;
  assign Pop_Clk0_Sel   	= 1'b0;
  assign Async_Flush_Sel0 = 1'b0;

  assign reg_rd0 = reg_rd_int;
  assign sync_fifo0 = sync_fifo_int;

  assign addr_wr=11'b00000000000;
  assign addr_rd=11'b00000000000;

  assign clk1_sig0 = Fifo_Dir ? Pop_Clk : Push_Clk;
  assign clk2_sig0 = Fifo_Dir ? Push_Clk : Pop_Clk ;
  assign clk1_sig_en0 = Fifo_Dir ? Pop_Clk_En : Push_Clk_En;
  assign clk2_sig_en0 = Fifo_Dir ? Push_Clk_En : Pop_Clk_En ;
  assign clk1_sig_sel0 =  Push_Clk0_Sel;
  assign clk2_sig_sel0 =  Pop_Clk0_Sel ;
  assign fifo_clk1_flush_sig0 = Fifo_Dir ? Fifo_Pop_Flush : Fifo_Push_Flush;
  assign fifo_clk2_flush_sig0 = Fifo_Dir ? Fifo_Push_Flush : Fifo_Pop_Flush ;
  assign p1_sig0 = Fifo_Dir ? POP : PUSH;
  assign p2_sig0 = Fifo_Dir ? PUSH : POP ;

  generate

    if (data_width_int == 16) begin
      assign in_reg0[data_width_int-1:0] = DIN[data_width_int-1:0];
    end else if (data_width_int > 8 && data_width_int < 16) begin
      assign in_reg0[15:data_width_int]  = 0;
      assign in_reg0[data_width_int-1:0] = DIN[data_width_int-1:0];
    end else if (data_width_int <= 8) begin
      assign in_reg0[15:data_width_int]  = 0;
      assign in_reg0[data_width_int-1:0] = DIN[data_width_int-1:0];
    end

    if (data_width_int <= 8) begin
      assign WS1_0 = 2'b00;
      assign WS2_0 = 2'b00;
    end else if (data_width_int > 8 && data_width_int <= 16) begin
      assign WS1_0 = 2'b01;
      assign WS2_0 = 2'b01;
    end else if (data_width_int > 16) begin
      assign WS1_0 = 2'b10;
      assign WS2_0 = 2'b10;
    end

  endgenerate

  ram8k_2x1_cell_macro _TECHMAP_REPLACE_ (
      .A1_0(addr_wr),
      .A1_1(addr_wr),
      .A2_0(addr_rd),
      .A2_1(addr_rd),
      .ASYNC_FLUSH_0(Async_Flush),
      .ASYNC_FLUSH_1(GND),
      .ASYNC_FLUSH_S0(Async_Flush_Sel0),
      .ASYNC_FLUSH_S1(GND),
      .CLK1_0(clk1_sig0),
      .CLK1_1(GND),
      .CLK1EN_0(clk1_sig_en0),
      .CLK1EN_1(GND),
      .CLK2_0(clk2_sig0),
      .CLK2_1(GND),
      .CLK1S_0(clk1_sig_sel0),
      .CLK1S_1(GND),
      .CLK2S_0(clk2_sig_sel0),
      .CLK2S_1(GND),
      .CLK2EN_0(clk2_sig_en0),
      .CLK2EN_1(GND),
      .CONCAT_EN_0(GND),
      .CONCAT_EN_1(GND),
      .CS1_0(fifo_clk1_flush_sig0),
      .CS1_1(GND),
      .CS2_0(fifo_clk2_flush_sig0),
      .CS2_1(GND),
      .DIR_0(Fifo_Dir),
      .DIR_1(GND),
      .FIFO_EN_0(VCC),
      .FIFO_EN_1(GND),
      .P1_0(p1_sig0),
      .P1_1(GND),
      .P2_0(p2_sig0),
      .P2_1(GND),
      .PIPELINE_RD_0(reg_rd0),
      .PIPELINE_RD_1(GND),
      .SYNC_FIFO_0(sync_fifo0),
      .SYNC_FIFO_1(GND),
      .WD_1({18{GND}}),
      .WD_0({1'b0, in_reg0[15:8], 1'b0, in_reg0[7:0]}),
      .WIDTH_SELECT1_0(WS1_0),
      .WIDTH_SELECT1_1({GND, GND}),
      .WIDTH_SELECT2_0(WS2_0),
      .WIDTH_SELECT2_1({GND, GND}),
      .WEN1_0({GND, GND}),
      .WEN1_1({GND, GND}),
      .Almost_Empty_0(Almost_Empty),
      .Almost_Empty_1(),
      .Almost_Full_0(Almost_Full),
      .Almost_Full_1(),
      .POP_FLAG_0(POP_FLAG),
      .POP_FLAG_1(),
      .PUSH_FLAG_0(PUSH_FLAG),
      .PUSH_FLAG_1(),
      .RD_0({out_par0[1], out_reg0[15:8], out_par0[0], out_reg0[7:0]}),
      .RD_1(),
      .SD(SD),
      .SD_RB1(SD_RB1),
      .LS(LS),
      .LS_RB1(LS_RB1),
      .DS(DS),
      .DS_RB1(DS_RB1),
      .TEST1A(GND),
      .TEST1B(GND),
      .RMA(4'd0),
      .RMB(4'd0),
      .RMEA(GND),
      .RMEB(GND)
  );

  assign DOUT[data_width_int-1 : 0] = out_reg0[data_width_int-1 : 0];

endmodule


module FIFO_16K_BLK (
    DIN,
    Fifo_Push_Flush,
    Fifo_Pop_Flush,
    PUSH,
    POP,
    Push_Clk,
    Pop_Clk,
    Push_Clk_En,
    Pop_Clk_En,
    Fifo_Dir,
    Async_Flush,
    Almost_Full,
    Almost_Empty,
    PUSH_FLAG,
    POP_FLAG,
    DOUT
);

  parameter data_depth_int = 512, data_width_int = 36, reg_rd_int = 0, sync_fifo_int = 0;

  input Fifo_Push_Flush, Fifo_Pop_Flush;
  input Push_Clk, Pop_Clk;
  input PUSH, POP;
  input [data_width_int-1:0] DIN;
  input Push_Clk_En, Pop_Clk_En, Fifo_Dir, Async_Flush;
  output [data_width_int-1:0] DOUT;
  output [3:0] PUSH_FLAG, POP_FLAG;
  output Almost_Full, Almost_Empty;

  wire LS, DS, SD, LS_RB1, DS_RB1, SD_RB1;
  wire VCC, GND;

  wire [10:0] addr_wr, addr_rd;
  wire clk1_sig0, clk2_sig0, clk1_sig_en0, clk2_sig_en0, fifo_clk1_flush_sig0, fifo_clk2_flush_sig0, p1_sig0, p2_sig0,clk1_sig_sel0,clk2_sig_sel0;
  wire reg_rd0, sync_fifo0;
  wire [31:0] in_reg0;
  wire [31:0] out_reg0;
  wire [ 1:0] WS1_0;
  wire [ 1:0] WS2_0;
  wire Push_Clk0_Sel, Pop_Clk0_Sel;
  wire Async_Flush_Sel0;

  wire [3:0] out_par0;
  wire [1:0] out_par1;

  assign LS = 1'b0;
  assign DS = 1'b0;
  assign SD = 1'b0;
  assign LS_RB1 = 1'b0;
  assign DS_RB1 = 1'b0;
  assign SD_RB1 = 1'b0;

  assign VCC = 1'b1;
  assign GND = 1'b0;

  assign Push_Clk0_Sel  	= 1'b0;
  assign Pop_Clk0_Sel   	= 1'b0;
  assign Async_Flush_Sel0 = 1'b0;

  assign reg_rd0 = reg_rd_int;
  assign sync_fifo0 = sync_fifo_int;

  assign addr_wr=11'b00000000000;
  assign addr_rd=11'b00000000000;

  assign clk1_sig0 = Fifo_Dir ? Pop_Clk : Push_Clk;
  assign clk2_sig0 = Fifo_Dir ? Push_Clk : Pop_Clk ;
  assign clk1_sig_en0 = Fifo_Dir ? Pop_Clk_En : Push_Clk_En;
  assign clk2_sig_en0 = Fifo_Dir ? Push_Clk_En : Pop_Clk_En ;
  assign clk1_sig_sel0 =  Push_Clk0_Sel;
  assign clk2_sig_sel0 =  Pop_Clk0_Sel ;
  assign fifo_clk1_flush_sig0 = Fifo_Dir ? Fifo_Pop_Flush : Fifo_Push_Flush;
  assign fifo_clk2_flush_sig0 = Fifo_Dir ? Fifo_Push_Flush : Fifo_Pop_Flush ;
  assign p1_sig0 = Fifo_Dir ? POP : PUSH;
  assign p2_sig0 = Fifo_Dir ? PUSH : POP ;

  generate
    if (data_width_int == 32) begin
      assign in_reg0[data_width_int-1:0] = DIN[data_width_int-1:0];
    end else if (data_width_int > 8 && data_width_int < 32) begin
      assign in_reg0[31:data_width_int]  = 0;
      assign in_reg0[data_width_int-1:0] = DIN[data_width_int-1:0];
    end else if (data_width_int <= 8) begin
      assign in_reg0[31:data_width_int]  = 0;
      assign in_reg0[data_width_int-1:0] = DIN[data_width_int-1:0];
    end

    if (data_width_int <= 8) begin
      assign WS1_0 = 2'b00;
      assign WS2_0 = 2'b00;
    end else if (data_width_int > 8 && data_width_int <= 16) begin
      assign WS1_0 = 2'b01;
      assign WS2_0 = 2'b01;
    end else if (data_width_int > 16) begin
      assign WS1_0 = 2'b10;
      assign WS2_0 = 2'b10;
    end

    if (data_width_int <= 16) begin

      ram8k_2x1_cell_macro _TECHMAP_REPLACE_ (
          .A1_0(addr_wr),
          .A1_1(addr_wr),
          .A2_0(addr_rd),
          .A2_1(addr_rd),
          .ASYNC_FLUSH_0(Async_Flush),
          .ASYNC_FLUSH_1(GND),
          .ASYNC_FLUSH_S0(Async_Flush_Sel0),
          .ASYNC_FLUSH_S1(Async_Flush_Sel0),
          .CLK1_0(clk1_sig0),
          .CLK1_1(clk1_sig0),
          .CLK1EN_0(clk1_sig_en0),
          .CLK1EN_1(clk1_sig_en0),
          .CLK2_0(clk2_sig0),
          .CLK2_1(clk2_sig0),
          .CLK1S_0(clk1_sig_sel0),
          .CLK1S_1(clk1_sig_sel0),
          .CLK2S_0(clk2_sig_sel0),
          .CLK2S_1(clk2_sig_sel0),
          .CLK2EN_0(clk2_sig_en0),
          .CLK2EN_1(clk2_sig_en0),
          .CONCAT_EN_0(VCC),
          .CONCAT_EN_1(GND),
          .CS1_0(fifo_clk1_flush_sig0),
          .CS1_1(GND),
          .CS2_0(fifo_clk2_flush_sig0),
          .CS2_1(GND),
          .DIR_0(Fifo_Dir),
          .DIR_1(GND),
          .FIFO_EN_0(VCC),
          .FIFO_EN_1(GND),
          .P1_0(p1_sig0),
          .P1_1(GND),
          .P2_0(p2_sig0),
          .P2_1(GND),
          .PIPELINE_RD_0(reg_rd0),
          .PIPELINE_RD_1(GND),
          .SYNC_FIFO_0(sync_fifo0),
          .SYNC_FIFO_1(GND),
          .WD_1({18{GND}}),
          .WD_0({1'b0, in_reg0[15:8], 1'b0, in_reg0[7:0]}),
          .WIDTH_SELECT1_0(WS1_0),
          .WIDTH_SELECT1_1({GND, GND}),
          .WIDTH_SELECT2_0(WS2_0),
          .WIDTH_SELECT2_1({GND, GND}),
          .WEN1_0({GND, GND}),
          .WEN1_1({GND, GND}),
          .Almost_Empty_0(Almost_Empty),
          .Almost_Empty_1(),
          .Almost_Full_0(Almost_Full),
          .Almost_Full_1(),
          .POP_FLAG_0(POP_FLAG),
          .POP_FLAG_1(),
          .PUSH_FLAG_0(PUSH_FLAG),
          .PUSH_FLAG_1(),
          .RD_0({out_par0[1], out_reg0[15:8], out_par0[0], out_reg0[7:0]}),
          .RD_1(),
          .SD(SD),
          .SD_RB1(SD_RB1),
          .LS(LS),
          .LS_RB1(LS_RB1),
          .DS(DS),
          .DS_RB1(DS_RB1),
          .TEST1A(GND),
          .TEST1B(GND),
          .RMA(4'd0),
          .RMB(4'd0),
          .RMEA(GND),
          .RMEB(GND)
      );

    end else if (data_width_int > 16) begin

      ram8k_2x1_cell_macro _TECHMAP_REPLACE_ (
          .A1_0(addr_wr),
          .A1_1(addr_wr),
          .A2_0(addr_rd),
          .A2_1(addr_rd),
          .ASYNC_FLUSH_0(Async_Flush),
          .ASYNC_FLUSH_1(GND),
          .ASYNC_FLUSH_S0(Async_Flush_Sel0),
          .ASYNC_FLUSH_S1(Async_Flush_Sel0),
          .CLK1_0(clk1_sig0),
          .CLK1_1(clk1_sig0),
          .CLK1EN_0(clk1_sig_en0),
          .CLK1EN_1(clk1_sig_en0),
          .CLK2_0(clk2_sig0),
          .CLK2_1(clk2_sig0),
          .CLK1S_0(clk1_sig_sel0),
          .CLK1S_1(clk1_sig_sel0),
          .CLK2S_0(clk2_sig_sel0),
          .CLK2S_1(clk2_sig_sel0),
          .CLK2EN_0(clk2_sig_en0),
          .CLK2EN_1(clk2_sig_en0),
          .CONCAT_EN_0(VCC),
          .CONCAT_EN_1(GND),
          .CS1_0(fifo_clk1_flush_sig0),
          .CS1_1(GND),
          .CS2_0(fifo_clk2_flush_sig0),
          .CS2_1(GND),
          .DIR_0(Fifo_Dir),
          .DIR_1(GND),
          .FIFO_EN_0(VCC),
          .FIFO_EN_1(GND),
          .P1_0(p1_sig0),
          .P1_1(GND),
          .P2_0(p2_sig0),
          .P2_1(GND),
          .PIPELINE_RD_0(reg_rd0),
          .PIPELINE_RD_1(GND),
          .SYNC_FIFO_0(sync_fifo0),
          .SYNC_FIFO_1(GND),
          .WD_1({1'b0, in_reg0[31:24], 1'b0, in_reg0[23:16]}),
          .WD_0({1'b0, in_reg0[15:8], 1'b0, in_reg0[7:0]}),
          .WIDTH_SELECT1_0(WS1_0),
          .WIDTH_SELECT1_1({GND, GND}),
          .WIDTH_SELECT2_0(WS2_0),
          .WIDTH_SELECT2_1({GND, GND}),
          .WEN1_0({GND, GND}),
          .WEN1_1({GND, GND}),
          .Almost_Empty_0(Almost_Empty),
          .Almost_Empty_1(),
          .Almost_Full_0(Almost_Full),
          .Almost_Full_1(),
          .POP_FLAG_0(POP_FLAG),
          .POP_FLAG_1(),
          .PUSH_FLAG_0(PUSH_FLAG),
          .PUSH_FLAG_1(),
          .RD_0({out_par0[1], out_reg0[15:8], out_par0[0], out_reg0[7:0]}),
          .RD_1({out_par0[3], out_reg0[31:24], out_par0[2], out_reg0[23:16]}),
          .SD(SD),
          .SD_RB1(SD_RB1),
          .LS(LS),
          .LS_RB1(LS_RB1),
          .DS(DS),
          .DS_RB1(DS_RB1),
          .TEST1A(GND),
          .TEST1B(GND),
          .RMA(4'd0),
          .RMB(4'd0),
          .RMEA(GND),
          .RMEB(GND)
      );
    end

  endgenerate

  assign DOUT[data_width_int-1 : 0] = out_reg0[data_width_int-1 : 0];

endmodule