// Copyright (C) 2020-2021  The SymbiFlow Authors.
//
// Use of this source code is governed by a ISC-style
// license that can be found in the LICENSE file or at
// https://opensource.org/licenses/ISC
//
// SPDX-License-Identifier:ISC

(* abc9_box, lib_whitebox *)
module adder(
    output sumout,
    output cout,
    input a,
    input b,
    input cin
);
    assign sumout = a ^ b ^ cin;
    assign cout = (a & b) | ((a | b) & cin);

endmodule


(* abc9_lut=1, lib_whitebox *)
module frac_lut6(
    input [0:5] in,
    output [0:3] lut4_out,
    output [0:1] lut5_out,
    output lut6_out
);
    parameter [0:63] LUT = 0;
    // Effective LUT input
    wire [0:5] li = in;

    // Output function
    wire [0:31] s1 = li[0] ?
    {LUT[0] , LUT[2] , LUT[4] , LUT[6] , LUT[8] , LUT[10], LUT[12], LUT[14], 
     LUT[16], LUT[18], LUT[20], LUT[22], LUT[24], LUT[26], LUT[28], LUT[30],
     LUT[32], LUT[34], LUT[36], LUT[38], LUT[40], LUT[42], LUT[44], LUT[46],
     LUT[48], LUT[50], LUT[52], LUT[54], LUT[56], LUT[58], LUT[60], LUT[62]}:
    {LUT[1] , LUT[3] , LUT[5] , LUT[7] , LUT[9] , LUT[11], LUT[13], LUT[15], 
     LUT[17], LUT[19], LUT[21], LUT[23], LUT[25], LUT[27], LUT[29], LUT[31],
     LUT[33], LUT[35], LUT[37], LUT[39], LUT[41], LUT[43], LUT[45], LUT[47],
     LUT[49], LUT[51], LUT[53], LUT[55], LUT[57], LUT[59], LUT[61], LUT[63]};

    wire [0:15] s2 = li[1] ?
    {s1[0] , s1[2] , s1[4] , s1[6] , s1[8] , s1[10], s1[12], s1[14],
     s1[16], s1[18], s1[20], s1[22], s1[24], s1[26], s1[28], s1[30]}:
    {s1[1] , s1[3] , s1[5] , s1[7] , s1[9] , s1[11], s1[13], s1[15],
     s1[17], s1[19], s1[21], s1[23], s1[25], s1[27], s1[29], s1[31]};

    wire [0:7] s3 = li[2] ?
    {s2[0], s2[2], s2[4], s2[6], s2[8], s2[10], s2[12], s2[14]}:
    {s2[1], s2[3], s2[5], s2[7], s2[9], s2[11], s2[13], s2[15]};

    wire [0:3] s4 = li[3] ? {s3[0], s3[2], s3[4], s3[6]}:
                            {s3[1], s3[3], s3[5], s3[7]};

    wire [0:1] s5 = li[4] ? {s4[0], s4[2]} : {s4[1], s4[3]};

    assign lut4_out[0] = s4[0];
    assign lut4_out[1] = s4[1];
    assign lut4_out[2] = s4[2];
    assign lut4_out[3] = s4[3];

    assign lut5_out[0] = s0[0];
    assign lut5_out[1] = s5[1];

    assign lut6_out = li[5] ? s5[0] : s5[1];

endmodule

(* abc9_flop, lib_whitebox *)
module dff(
    output reg Q,
    input D,
    (* clkbuf_sink *)
    (* invertible_pin = "IS_C_INVERTED" *)
    input C
);
    parameter [0:0] INIT = 1'b0;
    parameter [0:0] IS_C_INVERTED = 1'b0;
    initial Q = INIT;
    case(|IS_C_INVERTED)
          1'b0:
            always @(posedge C)
                Q <= D;
          1'b1:
            always @(negedge C)
                Q <= D;
    endcase
endmodule

(* abc9_flop, lib_whitebox *)
module dffr(
    output reg Q,
    input D,
    input R,
    (* clkbuf_sink *)
    (* invertible_pin = "IS_C_INVERTED" *)
    input C
);
    parameter [0:0] INIT = 1'b0;
    parameter [0:0] IS_C_INVERTED = 1'b0;
    initial Q = INIT;
    case(|IS_C_INVERTED)
          1'b0:
            always @(posedge C or posedge R)
                if (R)
                        Q <= 1'b0;
                else
                        Q <= D;
          1'b1:
            always @(negedge C or posedge R)
                if (R)
                        Q <= 1'b0;
                else
                        Q <= D;
    endcase
endmodule

(* abc9_flop, lib_whitebox *)
module dffre(
    output reg Q,
    input D,
    input R,
    input E,
    (* clkbuf_sink *)
    (* invertible_pin = "IS_C_INVERTED" *)
    input C
);
    parameter [0:0] INIT = 1'b0;
    parameter [0:0] IS_C_INVERTED = 1'b0;
    initial Q = INIT;
    case(|IS_C_INVERTED)
          1'b0:
            always @(posedge C or posedge R)
              if (R)
                Q <= 1'b0;
              else if(E)
                Q <= D;
          1'b1:
            always @(negedge C or posedge R)
              if (R)
                Q <= 1'b0;
              else if(E)
                Q <= D;
        endcase
endmodule

module dffs(
    output reg Q,
    input D,
    (* clkbuf_sink *)
    (* invertible_pin = "IS_C_INVERTED" *)
    input C,
    input S
);
    parameter [0:0] INIT = 1'b0;
    parameter [0:0] IS_C_INVERTED = 1'b0;
    initial Q = INIT;
    case(|IS_C_INVERTED)
          1'b0:
            always @(posedge C or negedge S)
              if (S)
                Q <= 1'b1;
              else
                Q <= D;
          1'b1:
            always @(negedge C or negedge S)
              if (S)
                Q <= 1'b1;
              else
                Q <= D;
        endcase
endmodule

module dffse(
    output reg Q,
    input D,
    (* clkbuf_sink *)
    (* invertible_pin = "IS_C_INVERTED" *)
    input C,
    input S,
    input E,
);
    parameter [0:0] INIT = 1'b0;
    parameter [0:0] IS_C_INVERTED = 1'b0;
    initial Q = INIT;
    case(|IS_C_INVERTED)
          1'b0:
            always @(posedge C or negedge S)
              if (S)
                Q <= 1'b1;
              else if(E)
                Q <= D;
          1'b1:
            always @(negedge C or negedge S)
              if (S)
                Q <= 1'b1;
              else if(E)
                Q <= D;
        endcase
endmodule

module dffsr(
    output reg Q,
    input D,
    (* clkbuf_sink *)
    (* invertible_pin = "IS_C_INVERTED" *)
    input C,
    input R,
    input S
);
    parameter [0:0] INIT = 1'b0;
    parameter [0:0] IS_C_INVERTED = 1'b0;
    initial Q = INIT;
    case(|IS_C_INVERTED)
          1'b0:
            always @(posedge C or negedge S or negedge R)
              if (S)
                Q <= 1'b1;
              else if (R)
                Q <= 1'b0;
              else
                Q <= D;
          1'b1:
            always @(negedge C or negedge S or negedge R)
              if (S)
                Q <= 1'b1;
              else if (R)
                Q <= 1'b0;
              else
                Q <= D;
        endcase
endmodule

module dffsre(
    output reg Q,
    input D,
    (* clkbuf_sink *)
    (* invertible_pin = "IS_C_INVERTED" *)
    input C,
    input E,
    input R,
    input S
);
    parameter [0:0] INIT = 1'b0;
    parameter [0:0] IS_C_INVERTED = 1'b0;
    initial Q = INIT;
    case(|IS_C_INVERTED)
          1'b0:
            always @(posedge C or posedge S or posedge R)
              if (S)
                Q <= 1'b1;
              else if (R)
                Q <= 1'b0;
              else if (E)
                Q <= D;
        endcase
endmodule

(* abc9_flop, lib_whitebox *)
module latchsre (
    output reg Q,
    input S,
    input R,
    input D,
    input G,
    input E
);
    parameter [0:0] INIT = 1'b0;
    parameter [0:0] IS_C_INVERTED = 1'b0;
    initial Q = INIT;
    always @*
            begin
              if (R) Q <= 1'b0;
              if (S) Q <= 1'b1;
            else if (E && G) Q <= D;
    end
endmodule

(* abc9_flop, lib_whitebox *)
module scff(
    output reg Q,
    input D,
    input clk
);
    parameter [0:0] INIT = 1'b0;
    initial Q = INIT;

    always @(posedge clk)
            Q <= D;
endmodule

module DP_RAM16K (
    input rclk, 
    input wclk,
    input wen,
    input ren,
    input[8:0] waddr,
    input[8:0] raddr,
    input[31:0] d_in,
    input[31:0] wenb,
    output[31:0] d_out );

    _dual_port_sram memory_0 (
                .wclk           (wclk),
                .wen            (wen),
                .waddr          (waddr),
                .data_in        (d_in),
                .rclk           (rclk),
                .ren            (ren),
                .raddr          (raddr),
                .wenb		(wenb),
                .d_out          (d_out) );

endmodule

module _dual_port_sram (
    input wclk,
    input wen,
    input[8:0] waddr,
    input[31:0] data_in,
    input rclk,
    input ren,
    input[8:0] raddr,
    input[31:0] wenb,
    output[31:0] d_out );

    // MODE 0:  512 x 32
    // MODE 1: 1024 x 16
    // MODE 2: 1024 x 8
    // MODE 3: 2048 x 4
        
    integer i;
    reg[31:0] ram[512:0];
    reg[31:0] internal;
    // The memory is self initialised
        
    initial begin
            for (i=0;i<=512;i=i+1)
            begin
                ram[i] = 0;
            end
            internal = 31'b0; 
    end
    
    wire [31:0] WMASK;

    assign d_out = internal;
    assign WMASK = wenb;

    always @(posedge wclk) begin
            if(!wen) begin
              if (WMASK[ 0]) ram[waddr][ 0] <= data_in[ 0];
              if (WMASK[ 1]) ram[waddr][ 1] <= data_in[ 1];
              if (WMASK[ 2]) ram[waddr][ 2] <= data_in[ 2];
              if (WMASK[ 3]) ram[waddr][ 3] <= data_in[ 3];
              if (WMASK[ 4]) ram[waddr][ 4] <= data_in[ 4];
              if (WMASK[ 5]) ram[waddr][ 5] <= data_in[ 5];
              if (WMASK[ 6]) ram[waddr][ 6] <= data_in[ 6];
              if (WMASK[ 7]) ram[waddr][ 7] <= data_in[ 7];
              if (WMASK[ 8]) ram[waddr][ 8] <= data_in[ 8];
              if (WMASK[ 9]) ram[waddr][ 9] <= data_in[ 9];
              if (WMASK[10]) ram[waddr][10] <= data_in[10];
              if (WMASK[11]) ram[waddr][11] <= data_in[11];
              if (WMASK[12]) ram[waddr][12] <= data_in[12];
              if (WMASK[13]) ram[waddr][13] <= data_in[13];
              if (WMASK[14]) ram[waddr][14] <= data_in[14];
              if (WMASK[15]) ram[waddr][15] <= data_in[15];
              if (WMASK[16]) ram[waddr][16] <= data_in[16];
              if (WMASK[17]) ram[waddr][17] <= data_in[17];
              if (WMASK[18]) ram[waddr][18] <= data_in[18];
              if (WMASK[19]) ram[waddr][19] <= data_in[19];
              if (WMASK[20]) ram[waddr][20] <= data_in[20];
              if (WMASK[21]) ram[waddr][21] <= data_in[21];
              if (WMASK[22]) ram[waddr][22] <= data_in[22];
              if (WMASK[23]) ram[waddr][23] <= data_in[23];
              if (WMASK[24]) ram[waddr][24] <= data_in[24];
              if (WMASK[25]) ram[waddr][25] <= data_in[25];
              if (WMASK[26]) ram[waddr][26] <= data_in[26];
              if (WMASK[27]) ram[waddr][27] <= data_in[27];
              if (WMASK[28]) ram[waddr][28] <= data_in[28];
              if (WMASK[29]) ram[waddr][29] <= data_in[29];
              if (WMASK[30]) ram[waddr][30] <= data_in[30];
              if (WMASK[31]) ram[waddr][31] <= data_in[31];
            end
    end

    always @(posedge rclk) begin
            if(!ren) begin
              internal <= ram[raddr];
            end
    end
endmodule

module QL_DSP (
    input CLK,
    input [15:0] A, B, C, D,
    output [31:0] O,
    output CO // Currently unused, left in case we want to support signed operations in the future.
);
    parameter [0:0] A_REG = 0;
    parameter [0:0] B_REG = 0;
    parameter [0:0] C_REG = 0;
    parameter [0:0] D_REG = 0;
    parameter [0:0] ENABLE_DSP = 0;
    parameter [0:0] A_SIGNED = 0;
    parameter [0:0] B_SIGNED = 0;

    wire [15:0] iA, iB, iC, iD;
    wire [15:0] iF, iJ, iK, iG;

    // Regs C and A, currently unused
    reg [15:0] rC, rA;

    assign iC = C_REG ? rC : C;
    assign iA = A_REG ? rA : A;

    // Regs B and D, currently unused
    reg [15:0] rB, rD;

    assign iB = B_REG ? rB : B;
    assign iD = D_REG ? rD : D;

    // Multiplier Stage
    wire [15:0] p_Ah_Bh, p_Al_Bh, p_Ah_Bl, p_Al_Bl;
    wire [15:0] Ah, Al, Bh, Bl;
    assign Ah = {A_SIGNED ? {8{iA[15]}} : 8'b0, iA[15: 8]};
    assign Al = {8'b0, iA[ 7: 0]};
    assign Bh = {B_SIGNED ? {8{iB[15]}} : 8'b0, iB[15: 8]};
    assign Bl = {8'b0, iB[ 7: 0]};
    assign p_Ah_Bh = Ah * Bh; // F
    assign p_Al_Bh = {8'b0, Al[7:0]} * Bh; // J
    assign p_Ah_Bl = Ah * {8'b0, Bl[7:0]}; // K
    assign p_Al_Bl = Al * Bl; // G

    assign iF = p_Ah_Bh;
    assign iJ = p_Al_Bh;

    assign iK = p_Ah_Bl;
    assign iG = p_Al_Bl;

    // Adder Stage
    wire [23:0] iK_e = {A_SIGNED ? {8{iK[15]}} : 8'b0, iK};
    wire [23:0] iJ_e = {B_SIGNED ? {8{iJ[15]}} : 8'b0, iJ};
    assign iL = iG + (iK_e << 8) + (iJ_e << 8) + (iF << 16);

    // Output Stage
    assign O = iL;

endmodule