minitests: Add PLLE4_BASE minitest

Signed-off-by: Tomasz Michalak <tmichalak@antmicro.com>

minitests/pll/Makefile

diff --git a/minitests/pll/Makefile b/minitests/pll/Makefile
new file mode 100644
index 0000000..1d13e21
--- /dev/null
+++ b/minitests/pll/Makefile
@@ -0,0 +1 @@
+include ../util/common.mk

minitests/pll/top.v

diff --git a/minitests/pll/top.v b/minitests/pll/top.v
new file mode 100644
index 0000000..69365e9
--- /dev/null
+++ b/minitests/pll/top.v
@@ -0,0 +1,80 @@
+module top(input clk, stb, di, output do);
+    localparam integer DIN_N = 160;
+    localparam integer DOUT_N = 160;
+
+    reg [DIN_N-1:0] din;
+    wire [DOUT_N-1:0] dout;
+
+    reg [DIN_N-1:0] din_shr;
+    reg [DOUT_N-1:0] dout_shr;
+
+    always @(posedge clk) begin
+        din_shr <= {din_shr, di};
+        dout_shr <= {dout_shr, din_shr[DIN_N-1]};
+        if (stb) begin
+            din <= din_shr;
+            dout_shr <= dout;
+        end
+    end
+
+    assign do = dout_shr[DOUT_N-1];
+
+    roi roi (
+        .clk(clk),
+        .din(din),
+        .dout(dout)
+    );
+endmodule
+
+module roi(input clk, input [159:0] din, output [159:0] dout);
+	my_PLL
+	#(
+		.LOC("PLL_X0Y10")
+	)
+	inst_0 (
+		.clk(clk),
+		.din(din[  0 +: 7]),
+		.dout(dout[ 0 +: 2])
+	);
+endmodule
+
+// ---------------------------------------------------------------------
+module my_PLL (input clk, input [6:0] din, output [1:0] dout);
+
+   parameter LOC = "";
+
+   (* LOC=LOC *)
+   PLLE4_BASE #(
+      .CLKFBOUT_MULT(8),          // Multiply value for all CLKOUT
+      .CLKFBOUT_PHASE(0.0),       // Phase offset in degrees of CLKFB
+      .CLKIN_PERIOD(10.0),         // Input clock period in ns to ps resolution (i.e. 33.333 is 30 MHz).
+      .CLKOUT0_DIVIDE(1),         // Divide amount for CLKOUT0
+      .CLKOUT0_DUTY_CYCLE(0.5),   // Duty cycle for CLKOUT0
+      .CLKOUT0_PHASE(0.0),        // Phase offset for CLKOUT0
+      .CLKOUT1_DIVIDE(1),         // Divide amount for CLKOUT1
+      .CLKOUT1_DUTY_CYCLE(0.5),   // Duty cycle for CLKOUT1
+      .CLKOUT1_PHASE(0.0),        // Phase offset for CLKOUT1
+      .CLKOUTPHY_MODE("VCO_2X"),  // Frequency of the CLKOUTPHY
+      .DIVCLK_DIVIDE(1),          // Master division value
+      .IS_CLKFBIN_INVERTED(1'b0), // Optional inversion for CLKFBIN
+      .IS_CLKIN_INVERTED(1'b0),   // Optional inversion for CLKIN
+      .IS_PWRDWN_INVERTED(1'b0),  // Optional inversion for PWRDWN
+      .IS_RST_INVERTED(1'b0),     // Optional inversion for RST
+      .REF_JITTER(0.0),           // Reference input jitter in UI
+      .STARTUP_WAIT("FALSE")      // Delays DONE until PLL is locked
+   )
+   PLLE4_BASE_inst (
+      .CLKFBOUT(dout[0]),       // 1-bit output: Feedback clock
+      .CLKOUT0(dout[1]),         // 1-bit output: General Clock output
+      .CLKOUT0B(dout[2]),       // 1-bit output: Inverted CLKOUT0
+      .CLKOUT1(dout[3]),         // 1-bit output: General Clock output
+      .CLKOUT1B(dout[4]),       // 1-bit output: Inverted CLKOUT1
+      .CLKOUTPHY(dout[5]),     // 1-bit output: Bitslice clock
+      .LOCKED(dout[6]),           // 1-bit output: LOCK
+      .CLKFBIN(),         // 1-bit input: Feedback clock
+      .CLKIN(clk),             // 1-bit input: Input clock
+      .CLKOUTPHYEN(1'b1), // 1-bit input: CLKOUTPHY enable
+      .PWRDWN(din[0]),           // 1-bit input: Power-down
+      .RST(din[1])                  // 1-bit input: Reset
+   );
+endmodule