| # Copyright 2020 Project U-Ray Authors | |
| # | |
| # Licensed under the Apache License, Version 2.0 (the "License"); | |
| # you may not use this file except in compliance with the License. | |
| # You may obtain a copy of the License at | |
| # | |
| # http://www.apache.org/licenses/LICENSE-2.0 | |
| # | |
| # Unless required by applicable law or agreed to in writing, software | |
| # distributed under the License is distributed on an "AS IS" BASIS, | |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| # See the License for the specific language governing permissions and | |
| # limitations under the License. | |
| import numpy as np | |
| import sys | |
| import math | |
| print("module top(input clk, clkb, rst, ena, enb, cea, ceb, input [14:0] ra, wa, input [7:0] we, input [17:0] wdata, input [10:0] sel, output [35:0] rdata);") | |
| N = 300 | |
| print(" wire [71:0] int_d[0:%d-1];" % N) | |
| print(" assign rdata = int_d[sel[10:2]][18 * sel[1:0] +: 18];") | |
| for i in range(N): | |
| write_width_b = np.random.choice([0, 1, 2, 4, 9, 18, 36, 72]) | |
| read_width_a = np.random.choice([0, 1, 2, 4, 9, 18, 36, 72], p=[0.05, 0.1, 0.1, 0.1, 0.05, 0.05, 0.45, 0.1]) | |
| write_width_a = 0 if (write_width_b == 72 or read_width_a == 72) else np.random.choice([0, 1, 2, 4, 9, 18, 36]) | |
| read_width_b = 0 if (write_width_b == 72 or read_width_a == 72) else np.random.choice([0, 1, 2, 4, 9, 18, 36], p=[0.05, 0.1, 0.1, 0.1, 0.1, 0.1, 0.45]) | |
| cd = np.random.choice(["INDEPENDENT", "COMMON"]) | |
| print(" RAMB36E2 #(") | |
| print(" .CLOCK_DOMAINS(\"%s\")," % cd) | |
| print(" .READ_WIDTH_A(%d)," % read_width_a) | |
| print(" .READ_WIDTH_B(%d)," % read_width_b) | |
| print(" .WRITE_WIDTH_A(%d)," % write_width_a) | |
| print(" .WRITE_WIDTH_B(%d)," % write_width_b) | |
| print(" .WRITE_MODE_A(\"%s\")," % np.random.choice(["NO_CHANGE", "READ_FIRST", "WRITE_FIRST"])) | |
| print(" .WRITE_MODE_B(\"%s\")," % np.random.choice(["NO_CHANGE", "READ_FIRST", "WRITE_FIRST"])) | |
| print(" .CASCADE_ORDER_A(\"%s\")," % np.random.choice(["NONE", "FIRST", "MIDDLE", "LAST"])) | |
| print(" .CASCADE_ORDER_B(\"%s\")," % np.random.choice(["NONE", "FIRST", "MIDDLE", "LAST"])) | |
| print(" .DOA_REG(%d)," % (0 if (write_width_b == 72 or read_width_a == 72) else np.random.randint(2))) | |
| print(" .DOB_REG(%d)," % (0 if (write_width_b == 72 or read_width_a == 72) else np.random.randint(2))) | |
| print(" .ENADDRENA(\"%s\")," % np.random.choice(["FALSE", "TRUE"])) | |
| print(" .ENADDRENB(\"%s\")," % np.random.choice(["FALSE", "TRUE"])) | |
| print(" .EN_ECC_PIPE(\"%s\")," % np.random.choice(["FALSE", "TRUE"], p=[0.9, 0.1])) | |
| print(" .EN_ECC_READ(\"%s\")," % np.random.choice(["FALSE", "TRUE"], p=[0.9, 0.1])) | |
| print(" .EN_ECC_WRITE(\"%s\")," % np.random.choice(["FALSE", "TRUE"], p=[0.9, 0.1])) | |
| print(" .RDADDRCHANGEA(\"%s\")," % np.random.choice(["FALSE", "TRUE"])) | |
| print(" .RDADDRCHANGEB(\"%s\")," % np.random.choice(["FALSE", "TRUE"])) | |
| print(" .SLEEP_ASYNC(\"%s\")," % np.random.choice(["FALSE", "TRUE"])) | |
| print(" .RSTREG_PRIORITY_A(\"%s\")," % np.random.choice(["RSTREG", "REGCE"])) | |
| print(" .RSTREG_PRIORITY_B(\"%s\")," % np.random.choice(["RSTREG", "REGCE"])) | |
| for pin in ("CLKARDCLK", "CLKBWRCLK", "ENARDEN", "ENBWREN", "RSTRAMARSTRAM", "RSTRAMB", "RSTREGARSTREG", "RSTREGB"): | |
| print(" .IS_%s_INVERTED(%d)," % (pin, np.random.randint(2))) | |
| print(" .INIT_A({18'd%d, 18'd%d})," % (np.random.randint(2**18), np.random.randint(2**18))) | |
| print(" .INIT_B({18'd%d, 18'd%d})," % (np.random.randint(2**18), np.random.randint(2**18))) | |
| print(" .SRVAL_A({18'd%d, 18'd%d})," % (np.random.randint(2**18), np.random.randint(2**18))) | |
| print(" .SRVAL_B({18'd%d, 18'd%d})" % (np.random.randint(2**18), np.random.randint(2**18))) | |
| print(" ) ram%d (" % i) | |
| print(" .DINADIN({wdata[15:0], wdata[15:0]}),") | |
| print(" .DINPADINP({wdata[17:16], wdata[17:16]}),") | |
| douta_bit = np.random.randint(-1, 37) | |
| if douta_bit >= 0 and douta_bit < 32: | |
| print(" .DOUTADOUT({int_d[%d][0]%s})," % (i, ", {%d{1'bx}}" % douta_bit if douta_bit > 0 else "")) | |
| if douta_bit >= 32: | |
| print(" .DOUTPADOUTP({int_d[%d][32]%s})," % (i, ", {%d{1'bx}}" % (douta_bit - 32) if douta_bit > 32 else "")) | |
| print(" .ADDRARDADDR(ra),") | |
| print(" .CLKARDCLK(clk),") | |
| print(" .ADDRENA(ena),") | |
| print(" .ENARDEN(ena),") | |
| print(" .REGCEAREGCE(cea),") | |
| print(" .RSTRAMARSTRAM(rst),") | |
| print(" .RSTREGARSTREG(rst),") | |
| print(" .WEA(%s)," % ("4'b00" if write_width_a == 0 else "we[3:0]")) | |
| print(" .DINBDIN({wdata[15:0], wdata[15:0]}),") | |
| print(" .DINPBDINP({wdata[17:16], wdata[17:16]}),") | |
| doutb_bit = np.random.randint(-1, 37) | |
| if doutb_bit >= 0 and doutb_bit < 32: | |
| print(" .DOUTBDOUT({int_d[%d][36]%s})," % (i, ", {%d{1'bx}}" % doutb_bit if doutb_bit > 0 else "")) | |
| if doutb_bit >= 32: | |
| print(" .DOUTPBDOUTP({int_d[%d][68]%s})," % (i, ", {%d{1'bx}}" % (doutb_bit - 32) if doutb_bit > 32 else "")) | |
| print(" .ADDRBWRADDR(wa),") | |
| print(" .CLKBWRCLK(%s)," % ("clkb" if cd == "INDEPENDENT" else "clk")) | |
| print(" .ENBWREN(enb),") | |
| print(" .ADDRENB(enb),") | |
| print(" .REGCEB(ceb),") | |
| print(" .RSTRAMB(rst),") | |
| print(" .RSTREGB(rst),") | |
| print(" .WEBWE(%s)" % ("4'b00" if write_width_b == 0 else ("we[7:0]" if write_width_b == 72 else "we[7:4]"))) | |
| print(" );") | |
| print() | |
| print("endmodule") |