utils/vlog: Tests for vlog_to_XXX based around DSP style blocks.

Signed-off-by: Tim 'mithro' Ansell <me@mith.ro>
diff --git a/tests/dsp_combinational/dsp_comb.model.xml b/tests/dsp_combinational/dsp_comb.model.xml
new file mode 100644
index 0000000..b7f6ad2
--- /dev/null
+++ b/tests/dsp_combinational/dsp_comb.model.xml
@@ -0,0 +1,13 @@
+<models xmlns:xi="http://www.w3.org/2001/XInclude">
+  <!-- https://docs.verilogtorouting.org/en/latest/tutorials/arch/timing_modeling/#sequential-block-no-internal-paths -->
+  <model name="dsp_comb">
+    <input_ports>
+      <port name="a" combinational_sink_ports="out"/>
+      <port name="b" combinational_sink_ports="out"/>
+      <port name="m" combinational_sink_ports="out"/>
+    </input_ports>
+    <output_ports>
+      <port name="out"/>
+    </output_ports>
+  </model>
+</models>
diff --git a/tests/dsp_combinational/dsp_comb.pb_type.xml b/tests/dsp_combinational/dsp_comb.pb_type.xml
new file mode 100644
index 0000000..235a4a2
--- /dev/null
+++ b/tests/dsp_combinational/dsp_comb.pb_type.xml
@@ -0,0 +1,14 @@
+<pb_type name="adder" blif_model=".subckt adder" num_pb="1">
+  <input name="a" num_pins="1"/>
+  <input name="b" num_pins="1"/>
+  <input name="cin" num_pins="1"/>
+  <output name="cout" num_pins="1"/>
+  <output name="sum" num_pins="1"/>
+
+  <delay_constant max="300e-12" in_port="adder.a" out_port="adder.sum"/>
+  <delay_constant max="300e-12" in_port="adder.b" out_port="adder.sum"/>
+  <delay_constant max="300e-12" in_port="adder.cin" out_port="adder.sum"/>
+  <delay_constant max="300e-12" in_port="adder.a" out_port="adder.cout"/>
+  <delay_constant max="300e-12" in_port="adder.b" out_port="adder.cout"/>
+  <delay_constant max="10e-12" in_port="adder.cin" out_port="adder.cout"/>
+</pb_type>
diff --git a/tests/dsp_combinational/dsp_comb.sim.v b/tests/dsp_combinational/dsp_comb.sim.v
new file mode 100644
index 0000000..a1b1541
--- /dev/null
+++ b/tests/dsp_combinational/dsp_comb.sim.v
@@ -0,0 +1,18 @@
+`ifndef DSP_COMB
+`define DSP_COMB
+module dsp_comb (
+	a, b, m,
+	out
+);
+	localparam DATA_WIDTH = 64;
+
+	input wire [DATA_WIDTH/2-1:0] a;
+	input wire [DATA_WIDTH/2-1:0] b;
+	input wire m;
+
+	output wire [DATA_WIDTH-1:0] out;
+
+	// Full adder combinational logic
+	assign out = m ? a * b : a / b;
+endmodule
+`endif
diff --git a/tests/dsp_in_registered/dsp_regi.model.xml b/tests/dsp_in_registered/dsp_regi.model.xml
new file mode 100644
index 0000000..6934652
--- /dev/null
+++ b/tests/dsp_in_registered/dsp_regi.model.xml
@@ -0,0 +1,15 @@
+<models xmlns:xi="http://www.w3.org/2001/XInclude">
+  <xi:include href="../dsp_combinational/dsp_comb.model.xml" xpointer="xpointer(models/child::node())"/>
+  <!-- https://docs.verilogtorouting.org/en/latest/tutorials/arch/timing_modeling/#mixed-sequential-combinational-block -->
+  <model name="dsp_regi">
+    <input_ports>
+      <port name="a" combinational_sink_ports="out" clock="clk"/>
+      <port name="b" combinational_sink_ports="out" clock="clk"/>
+      <port name="clk" is_clock="1"/>
+      <port name="m" combinational_sink_ports="out" clock="clk"/>
+    </input_ports>
+    <output_ports>
+      <port name="out"/>
+    </output_ports>
+  </model>
+</models>
diff --git a/tests/dsp_in_registered/dsp_regi.pb_type.xml b/tests/dsp_in_registered/dsp_regi.pb_type.xml
new file mode 100644
index 0000000..c1f9b7a
--- /dev/null
+++ b/tests/dsp_in_registered/dsp_regi.pb_type.xml
@@ -0,0 +1,22 @@
+<pb_type name="mem_sp" blif_model=".subckt single_port_ram_mixed" num_pb="1">
+  <input name="addr" num_pins="9"/>
+  <input name="data" num_pins="64"/>
+  <input name="we" num_pins="1"/>
+  <output name="out" num_pins="64"/>
+  <clock name="clk" num_pins="1"/>
+
+  <!-- External input register timing -->
+  <T_setup value="50e-12" port="mem_sp.addr" clock="clk"/>
+  <T_setup value="50e-12" port="mem_sp.data" clock="clk"/>
+  <T_setup value="50e-12" port="mem_sp.we" clock="clk"/>
+
+  <!-- Internal input register timing -->
+  <T_clock_to_Q max="200e-12" port="mem_sp.addr" clock="clk"/>
+  <T_clock_to_Q max="200e-12" port="mem_sp.data" clock="clk"/>
+  <T_clock_to_Q max="200e-12" port="mem_sp.we" clock="clk"/>
+
+  <!-- Internal combinational delay -->
+  <delay_constant max="800e-12" in_port="mem_sp.addr" out_port="mem_sp.out"/>
+  <delay_constant max="800e-12" in_port="mem_sp.data" out_port="mem_sp.out"/>
+  <delay_constant max="800e-12" in_port="mem_sp.we" out_port="mem_sp.out"/>
+</pb_type>
diff --git a/tests/dsp_in_registered/dsp_regi.sim.v b/tests/dsp_in_registered/dsp_regi.sim.v
new file mode 100644
index 0000000..cc37128
--- /dev/null
+++ b/tests/dsp_in_registered/dsp_regi.sim.v
@@ -0,0 +1,22 @@
+`include "../dsp_combinational/dsp_comb.sim.v"
+
+module dsp_regi (clk, a, b, m, out);
+	localparam DATA_WIDTH = 64;
+
+	input wire clk;
+	input wire [DATA_WIDTH/2-1:0] a;
+	input wire [DATA_WIDTH/2-1:0] b;
+	input wire m;
+	output wire [DATA_WIDTH-1:0] out;
+
+	reg [DATA_WIDTH/2-1:0] q_a;
+	reg [DATA_WIDTH/2-1:0] q_b;
+	reg q_m;
+	always @(posedge clk) begin
+		q_a <= a;
+		q_b <= b;
+		q_m <= m;
+	end
+
+	dsp_comb comb (.a(q_a), .b(q_b), .m(q_m), .out(out));
+endmodule
diff --git a/tests/dsp_inout_registered/dsp_regio.model.xml b/tests/dsp_inout_registered/dsp_regio.model.xml
new file mode 100644
index 0000000..ca29c9c
--- /dev/null
+++ b/tests/dsp_inout_registered/dsp_regio.model.xml
@@ -0,0 +1,15 @@
+<models xmlns:xi="http://www.w3.org/2001/XInclude">
+  <xi:include href="../dsp_combinational/dsp_comb.model.xml" xpointer="xpointer(models/child::node())"/>
+  <!-- https://docs.verilogtorouting.org/en/latest/tutorials/arch/timing_modeling/#mixed-sequential-combinational-block -->
+  <model name="dsp_regio">
+    <input_ports>
+      <port name="a" combinational_sink_ports="out" clock="clk"/>
+      <port name="b" combinational_sink_ports="out" clock="clk"/>
+      <port name="clk" is_clock="1"/>
+      <port name="m" combinational_sink_ports="out" clock="clk"/>
+    </input_ports>
+    <output_ports>
+      <port name="out" clock="clk"/>
+    </output_ports>
+  </model>
+</models>
diff --git a/tests/dsp_inout_registered/dsp_regio.pb_type.xml b/tests/dsp_inout_registered/dsp_regio.pb_type.xml
new file mode 100644
index 0000000..c1f9b7a
--- /dev/null
+++ b/tests/dsp_inout_registered/dsp_regio.pb_type.xml
@@ -0,0 +1,22 @@
+<pb_type name="mem_sp" blif_model=".subckt single_port_ram_mixed" num_pb="1">
+  <input name="addr" num_pins="9"/>
+  <input name="data" num_pins="64"/>
+  <input name="we" num_pins="1"/>
+  <output name="out" num_pins="64"/>
+  <clock name="clk" num_pins="1"/>
+
+  <!-- External input register timing -->
+  <T_setup value="50e-12" port="mem_sp.addr" clock="clk"/>
+  <T_setup value="50e-12" port="mem_sp.data" clock="clk"/>
+  <T_setup value="50e-12" port="mem_sp.we" clock="clk"/>
+
+  <!-- Internal input register timing -->
+  <T_clock_to_Q max="200e-12" port="mem_sp.addr" clock="clk"/>
+  <T_clock_to_Q max="200e-12" port="mem_sp.data" clock="clk"/>
+  <T_clock_to_Q max="200e-12" port="mem_sp.we" clock="clk"/>
+
+  <!-- Internal combinational delay -->
+  <delay_constant max="800e-12" in_port="mem_sp.addr" out_port="mem_sp.out"/>
+  <delay_constant max="800e-12" in_port="mem_sp.data" out_port="mem_sp.out"/>
+  <delay_constant max="800e-12" in_port="mem_sp.we" out_port="mem_sp.out"/>
+</pb_type>
diff --git a/tests/dsp_inout_registered/dsp_regio.sim.v b/tests/dsp_inout_registered/dsp_regio.sim.v
new file mode 100644
index 0000000..0bc4ba7
--- /dev/null
+++ b/tests/dsp_inout_registered/dsp_regio.sim.v
@@ -0,0 +1,33 @@
+`include "../dsp_combinational/dsp_comb.sim.v"
+
+/* DSP Block with register on both the inputs and the output */
+module dsp_regio (clk, a, b, m, out);
+	localparam DATA_WIDTH = 64;
+
+	input wire clk;
+	input wire [DATA_WIDTH/2-1:0] a;
+	input wire [DATA_WIDTH/2-1:0] b;
+	input wire m;
+	output wire [DATA_WIDTH-1:0] out;
+
+	/* Input registers */
+	reg [DATA_WIDTH/2-1:0] q_a;
+	reg [DATA_WIDTH/2-1:0] q_b;
+	reg q_m;
+	always @(posedge clk) begin
+		q_a <= a;
+		q_b <= b;
+	end
+
+	wire [DATA_WIDTH-1:0] c_out;
+	dsp_comb comb (.a(a), .b(b), .m(m), .out(c_out));
+	//dsp_comb comb (.a(q_a), .b(q_b), .m(q_m), .out(c_out));
+
+	/* Output register */
+	reg [DATA_WIDTH-1:0] q_out;
+	always @(posedge clk) begin
+		q_out <= c_out;
+	end
+
+	assign out = q_out;
+endmodule
diff --git a/tests/dsp_inout_registered_dualclk/dsp_regio_dualclk.model.xml b/tests/dsp_inout_registered_dualclk/dsp_regio_dualclk.model.xml
new file mode 100644
index 0000000..cd21824
--- /dev/null
+++ b/tests/dsp_inout_registered_dualclk/dsp_regio_dualclk.model.xml
@@ -0,0 +1,16 @@
+<models xmlns:xi="http://www.w3.org/2001/XInclude">
+  <xi:include href="../dsp_combinational/dsp_comb.model.xml" xpointer="xpointer(models/child::node())"/>
+  <!-- https://docs.verilogtorouting.org/en/latest/tutorials/arch/timing_modeling/#mixed-sequential-combinational-block -->
+  <model name="dsp_regio_dualclk">
+    <input_ports>
+      <port name="a" combinational_sink_ports="out" clock="iclk"/>
+      <port name="b" combinational_sink_ports="out" clock="iclk"/>
+      <port name="iclk" is_clock="1"/>
+      <port name="m" combinational_sink_ports="out" clock="iclk"/>
+      <port name="oclk" is_clock="1"/>
+    </input_ports>
+    <output_ports>
+      <port name="out" clock="oclk"/>
+    </output_ports>
+  </model>
+</models>
diff --git a/tests/dsp_inout_registered_dualclk/dsp_regio_dualclk.pb_type.xml b/tests/dsp_inout_registered_dualclk/dsp_regio_dualclk.pb_type.xml
new file mode 100644
index 0000000..c1f9b7a
--- /dev/null
+++ b/tests/dsp_inout_registered_dualclk/dsp_regio_dualclk.pb_type.xml
@@ -0,0 +1,22 @@
+<pb_type name="mem_sp" blif_model=".subckt single_port_ram_mixed" num_pb="1">
+  <input name="addr" num_pins="9"/>
+  <input name="data" num_pins="64"/>
+  <input name="we" num_pins="1"/>
+  <output name="out" num_pins="64"/>
+  <clock name="clk" num_pins="1"/>
+
+  <!-- External input register timing -->
+  <T_setup value="50e-12" port="mem_sp.addr" clock="clk"/>
+  <T_setup value="50e-12" port="mem_sp.data" clock="clk"/>
+  <T_setup value="50e-12" port="mem_sp.we" clock="clk"/>
+
+  <!-- Internal input register timing -->
+  <T_clock_to_Q max="200e-12" port="mem_sp.addr" clock="clk"/>
+  <T_clock_to_Q max="200e-12" port="mem_sp.data" clock="clk"/>
+  <T_clock_to_Q max="200e-12" port="mem_sp.we" clock="clk"/>
+
+  <!-- Internal combinational delay -->
+  <delay_constant max="800e-12" in_port="mem_sp.addr" out_port="mem_sp.out"/>
+  <delay_constant max="800e-12" in_port="mem_sp.data" out_port="mem_sp.out"/>
+  <delay_constant max="800e-12" in_port="mem_sp.we" out_port="mem_sp.out"/>
+</pb_type>
diff --git a/tests/dsp_inout_registered_dualclk/dsp_regio_dualclk.sim.v b/tests/dsp_inout_registered_dualclk/dsp_regio_dualclk.sim.v
new file mode 100644
index 0000000..13e3d15
--- /dev/null
+++ b/tests/dsp_inout_registered_dualclk/dsp_regio_dualclk.sim.v
@@ -0,0 +1,34 @@
+`include "../dsp_combinational/dsp_comb.sim.v"
+
+/* DSP Block with register on both the inputs and the output */
+module dsp_regio_dualclk (iclk, oclk, a, b, m, out);
+	localparam DATA_WIDTH = 64;
+
+	input wire iclk;
+	input wire oclk;
+	input wire [DATA_WIDTH/2-1:0] a;
+	input wire [DATA_WIDTH/2-1:0] b;
+	input wire m;
+	output wire [DATA_WIDTH-1:0] out;
+
+	/* Input registers on iclk */
+	reg [DATA_WIDTH/2-1:0] q_a;
+	reg [DATA_WIDTH/2-1:0] q_b;
+	reg q_m;
+	always @(posedge iclk) begin
+		q_a <= a;
+		q_b <= b;
+		q_m <= m;
+	end
+
+	wire [DATA_WIDTH-1:0] c_out;
+	dsp_comb comb (.a(a), .b(b), .m(m), .out(c_out));
+
+	/* Output register on oclk */
+	reg [DATA_WIDTH-1:0] q_out;
+	always @(posedge oclk) begin
+		q_out <= c_out;
+	end
+
+	assign out = q_out;
+endmodule
diff --git a/tests/dsp_modes/dsp_modes.model.xml b/tests/dsp_modes/dsp_modes.model.xml
new file mode 100644
index 0000000..133ccd5
--- /dev/null
+++ b/tests/dsp_modes/dsp_modes.model.xml
@@ -0,0 +1,16 @@
+<models xmlns:xi="http://www.w3.org/2001/XInclude">
+  <xi:include href="../dsp_in_registered/dsp_regi.model.xml" xpointer="xpointer(models/child::node())"/>
+  <xi:include href="../dsp_inout_registered/dsp_regio.model.xml" xpointer="xpointer(models/child::node())"/>
+  <xi:include href="../dsp_out_registered/dsp_rego.model.xml" xpointer="xpointer(models/child::node())"/>
+  <model name="dsp_modes">
+    <input_ports>
+      <port clock="clk" combinational_sink_ports="out" name="a"/>
+      <port clock="clk" combinational_sink_ports="out" name="b"/>
+      <port is_clock="1" name="clk"/>
+      <port clock="clk" combinational_sink_ports="out" name="m"/>
+    </input_ports>
+    <output_ports>
+      <port clock="clk" name="out"/>
+    </output_ports>
+  </model>
+</models>
diff --git a/tests/dsp_modes/dsp_modes.sim.v b/tests/dsp_modes/dsp_modes.sim.v
new file mode 100644
index 0000000..9c82379
--- /dev/null
+++ b/tests/dsp_modes/dsp_modes.sim.v
@@ -0,0 +1,28 @@
+`include "../dsp_in_registered/dsp_regi.sim.v"
+`include "../dsp_out_registered/dsp_rego.sim.v"
+`include "../dsp_inout_registered/dsp_regio.sim.v"
+
+/* DSP Block with register on both the inputs and the output */
+(* MODES="REGISTERED_IN; REGISTERED_OUT; REGISTERED_INOUT" *)
+module dsp_modes (clk, a, b, m, out);
+	localparam DATA_WIDTH = 64;
+
+	parameter MODE = "REGISTERED_INOUT";
+
+	input wire clk;
+	input wire [DATA_WIDTH/2-1:0] a;
+	input wire [DATA_WIDTH/2-1:0] b;
+	input wire m;
+	output wire [DATA_WIDTH-1:0] out;
+
+	/* Input registers */
+	generate
+		if (MODE == "REGISTERED_IN") begin
+			dsp_regi dsp_int_regi (.clk(clk), .a(a), .b(b), .m(m), .out(out));
+		end if (MODE == "REGISTERED_OUT") begin
+			dsp_rego dsp_int_rego (.clk(clk), .a(a), .b(b), .m(m), .out(out));
+		end if (MODE == "REGISTERED_INOUT") begin
+			dsp_regio dsp_int_regio (.clk(clk), .a(a), .b(b), .m(m), .out(out));
+		end
+	endgenerate
+endmodule
diff --git a/tests/dsp_out_registered/dsp_rego.model.xml b/tests/dsp_out_registered/dsp_rego.model.xml
new file mode 100644
index 0000000..7b596e1
--- /dev/null
+++ b/tests/dsp_out_registered/dsp_rego.model.xml
@@ -0,0 +1,15 @@
+<models xmlns:xi="http://www.w3.org/2001/XInclude">
+  <xi:include href="../dsp_combinational/dsp_comb.model.xml" xpointer="xpointer(models/child::node())"/>
+  <!-- https://docs.verilogtorouting.org/en/latest/tutorials/arch/timing_modeling/#mixed-sequential-combinational-block -->
+  <model name="dsp_rego">
+    <input_ports>
+      <port name="a" combinational_sink_ports="out"/>
+      <port name="b" combinational_sink_ports="out"/>
+      <port name="clk" is_clock="1"/>
+      <port name="m" combinational_sink_ports="out"/>
+    </input_ports>
+    <output_ports>
+      <port name="out" clock="clk"/>
+    </output_ports>
+  </model>
+</models>
diff --git a/tests/dsp_out_registered/dsp_rego.pb_type.xml b/tests/dsp_out_registered/dsp_rego.pb_type.xml
new file mode 100644
index 0000000..c1f9b7a
--- /dev/null
+++ b/tests/dsp_out_registered/dsp_rego.pb_type.xml
@@ -0,0 +1,22 @@
+<pb_type name="mem_sp" blif_model=".subckt single_port_ram_mixed" num_pb="1">
+  <input name="addr" num_pins="9"/>
+  <input name="data" num_pins="64"/>
+  <input name="we" num_pins="1"/>
+  <output name="out" num_pins="64"/>
+  <clock name="clk" num_pins="1"/>
+
+  <!-- External input register timing -->
+  <T_setup value="50e-12" port="mem_sp.addr" clock="clk"/>
+  <T_setup value="50e-12" port="mem_sp.data" clock="clk"/>
+  <T_setup value="50e-12" port="mem_sp.we" clock="clk"/>
+
+  <!-- Internal input register timing -->
+  <T_clock_to_Q max="200e-12" port="mem_sp.addr" clock="clk"/>
+  <T_clock_to_Q max="200e-12" port="mem_sp.data" clock="clk"/>
+  <T_clock_to_Q max="200e-12" port="mem_sp.we" clock="clk"/>
+
+  <!-- Internal combinational delay -->
+  <delay_constant max="800e-12" in_port="mem_sp.addr" out_port="mem_sp.out"/>
+  <delay_constant max="800e-12" in_port="mem_sp.data" out_port="mem_sp.out"/>
+  <delay_constant max="800e-12" in_port="mem_sp.we" out_port="mem_sp.out"/>
+</pb_type>
diff --git a/tests/dsp_out_registered/dsp_rego.sim.v b/tests/dsp_out_registered/dsp_rego.sim.v
new file mode 100644
index 0000000..6557f03
--- /dev/null
+++ b/tests/dsp_out_registered/dsp_rego.sim.v
@@ -0,0 +1,22 @@
+`include "../dsp_combinational/dsp_comb.sim.v"
+
+/* DSP Block with register on the output */
+module dsp_rego (clk, a, b, m, out);
+	localparam DATA_WIDTH = 64;
+
+	input wire clk;
+	input wire [DATA_WIDTH/2-1:0] a;
+	input wire [DATA_WIDTH/2-1:0] b;
+	input wire m;
+	output wire [DATA_WIDTH-1:0] out;
+
+	wire [DATA_WIDTH-1:0] c_out;
+	dsp_comb comb (.a(a), .b(b), .m(m), .out(c_out));
+
+	reg [DATA_WIDTH-1:0] q_out;
+	always @(posedge clk) begin
+		q_out <= c_out;
+	end
+
+	assign out = q_out;
+endmodule
diff --git a/tests/dsp_partial_registered/dsp_partial_registered.model.xml b/tests/dsp_partial_registered/dsp_partial_registered.model.xml
new file mode 100644
index 0000000..f7d2be6
--- /dev/null
+++ b/tests/dsp_partial_registered/dsp_partial_registered.model.xml
@@ -0,0 +1,15 @@
+<models xmlns:xi="http://www.w3.org/2001/XInclude">
+  <xi:include href="../dsp_combinational/dsp_comb.model.xml" xpointer="xpointer(models/child::node())"/>
+  <!-- https://docs.verilogtorouting.org/en/latest/tutorials/arch/timing_modeling/#mixed-sequential-combinational-block -->
+  <model name="dsp_regio">
+    <input_ports>
+      <port name="a" combinational_sink_ports="out" clock="clk"/>
+      <port name="b" combinational_sink_ports="out" clock="clk"/>
+      <port name="clk" is_clock="1"/>
+      <port name="m" combinational_sink_ports="out"/>
+    </input_ports>
+    <output_ports>
+      <port name="out" clock="clk"/>
+    </output_ports>
+  </model>
+</models>
diff --git a/tests/dsp_partial_registered/dsp_partial_registered.pb_type.xml b/tests/dsp_partial_registered/dsp_partial_registered.pb_type.xml
new file mode 100644
index 0000000..c1f9b7a
--- /dev/null
+++ b/tests/dsp_partial_registered/dsp_partial_registered.pb_type.xml
@@ -0,0 +1,22 @@
+<pb_type name="mem_sp" blif_model=".subckt single_port_ram_mixed" num_pb="1">
+  <input name="addr" num_pins="9"/>
+  <input name="data" num_pins="64"/>
+  <input name="we" num_pins="1"/>
+  <output name="out" num_pins="64"/>
+  <clock name="clk" num_pins="1"/>
+
+  <!-- External input register timing -->
+  <T_setup value="50e-12" port="mem_sp.addr" clock="clk"/>
+  <T_setup value="50e-12" port="mem_sp.data" clock="clk"/>
+  <T_setup value="50e-12" port="mem_sp.we" clock="clk"/>
+
+  <!-- Internal input register timing -->
+  <T_clock_to_Q max="200e-12" port="mem_sp.addr" clock="clk"/>
+  <T_clock_to_Q max="200e-12" port="mem_sp.data" clock="clk"/>
+  <T_clock_to_Q max="200e-12" port="mem_sp.we" clock="clk"/>
+
+  <!-- Internal combinational delay -->
+  <delay_constant max="800e-12" in_port="mem_sp.addr" out_port="mem_sp.out"/>
+  <delay_constant max="800e-12" in_port="mem_sp.data" out_port="mem_sp.out"/>
+  <delay_constant max="800e-12" in_port="mem_sp.we" out_port="mem_sp.out"/>
+</pb_type>
diff --git a/tests/dsp_partial_registered/dsp_partial_registered.sim.v b/tests/dsp_partial_registered/dsp_partial_registered.sim.v
new file mode 100644
index 0000000..eab72c3
--- /dev/null
+++ b/tests/dsp_partial_registered/dsp_partial_registered.sim.v
@@ -0,0 +1,32 @@
+`include "../dsp_combinational/dsp_comb.sim.v"
+
+/* DSP Block with register on both the inputs and the output */
+module dsp_partial_registered (clk, a, b, m, out);
+	localparam DATA_WIDTH = 64;
+
+	input wire clk;
+	input wire [DATA_WIDTH/2-1:0] a;
+	input wire [DATA_WIDTH/2-1:0] b;
+	input wire m;
+	output wire [DATA_WIDTH-1:0] out;
+
+	/* Input registers */
+	reg [DATA_WIDTH/2-1:0] q_a;
+	reg [DATA_WIDTH/2-1:0] q_b;
+	reg q_m;
+	always @(posedge clk) begin
+		q_a <= a;
+		q_b <= b;
+	end
+
+	wire [DATA_WIDTH-1:0] c_out;
+	dsp_comb comb (.a(a), .b(b), .m(m), .out(c_out));
+
+	/* Output register */
+	reg [DATA_WIDTH-1:0] q_out;
+	always @(posedge clk) begin
+		q_out <= c_out;
+	end
+
+	assign out = q_out;
+endmodule
diff --git a/tests/fig41-full-adder/adder.model.xml b/tests/fig41-full-adder/adder.model.xml
new file mode 100644
index 0000000..5ac3aef
--- /dev/null
+++ b/tests/fig41-full-adder/adder.model.xml
@@ -0,0 +1,14 @@
+<models xmlns:xi="http://www.w3.org/2001/XInclude">
+  <!-- https://docs.verilogtorouting.org/en/latest/tutorials/arch/timing_modeling/#sequential-block-no-internal-paths -->
+  <model name="adder">
+    <input_ports>
+      <port name="a" combinational_sink_ports="cout sum"/>
+      <port name="b" combinational_sink_ports="cout sum"/>
+      <port name="cin" combinational_sink_ports="cout sum"/>
+    </input_ports>
+    <output_ports>
+      <port name="cout"/>
+      <port name="sum"/>
+    </output_ports>
+  </model>
+</models>
diff --git a/tests/fig41-full-adder/adder.pb_type.xml b/tests/fig41-full-adder/adder.pb_type.xml
new file mode 100644
index 0000000..235a4a2
--- /dev/null
+++ b/tests/fig41-full-adder/adder.pb_type.xml
@@ -0,0 +1,14 @@
+<pb_type name="adder" blif_model=".subckt adder" num_pb="1">
+  <input name="a" num_pins="1"/>
+  <input name="b" num_pins="1"/>
+  <input name="cin" num_pins="1"/>
+  <output name="cout" num_pins="1"/>
+  <output name="sum" num_pins="1"/>
+
+  <delay_constant max="300e-12" in_port="adder.a" out_port="adder.sum"/>
+  <delay_constant max="300e-12" in_port="adder.b" out_port="adder.sum"/>
+  <delay_constant max="300e-12" in_port="adder.cin" out_port="adder.sum"/>
+  <delay_constant max="300e-12" in_port="adder.a" out_port="adder.cout"/>
+  <delay_constant max="300e-12" in_port="adder.b" out_port="adder.cout"/>
+  <delay_constant max="10e-12" in_port="adder.cin" out_port="adder.cout"/>
+</pb_type>
diff --git a/tests/fig41-full-adder/adder.sdf b/tests/fig41-full-adder/adder.sdf
new file mode 100644
index 0000000..9b897d2
--- /dev/null
+++ b/tests/fig41-full-adder/adder.sdf
@@ -0,0 +1,17 @@
+(DELAYFILE
+	(CELL
+		(CELLTYPE "adder")
+		(INSTANCE *)
+		(DELAY
+			(ABSOLUTE
+				(IOPATH a sum (::300) (::300))
+				(IOPATH b sum (::300) (::300))
+				(IOPATH cin sum (::300) (::300))
+
+				(IOPATH a cout (::300) (::300))
+				(IOPATH b cout (::300) (::300))
+				(IOPATH cin cout (::10) (::10))
+			)
+		)
+	)
+)
diff --git a/tests/fig41-full-adder/adder.sim.v b/tests/fig41-full-adder/adder.sim.v
new file mode 100644
index 0000000..8d6f351
--- /dev/null
+++ b/tests/fig41-full-adder/adder.sim.v
@@ -0,0 +1,35 @@
+module adder (
+	a, b, cin,
+	sum, cout
+);
+	input wire a;
+	input wire b;
+	input wire cin;
+
+	output wire sum;
+	output wire cout;
+
+	// Full adder combinational logic
+	assign sum = a ^ b ^ cin;
+	assign cout = ((a ^ b) & cin) | (a & b);
+
+	// Timing parameters, not supported by Yosys at the moment.
+`ifndef YOSYS
+	`timescale 1ps/1ps
+	specify
+		specparam T1 300;
+		specparam T2 10;
+		// (input->output) min:typ:max
+
+		(a => sum) 	= T1;
+		(b => sum)	= T1;
+		(cin => sum)	= T1;
+
+		(a => cout)	= T1;
+		(b => cout)	= T1;
+		(cin => cout)	= T2;
+
+	endspecify
+`endif
+endmodule
+
diff --git a/tests/fig42-dff/dff.model.xml b/tests/fig42-dff/dff.model.xml
new file mode 100644
index 0000000..f830c23
--- /dev/null
+++ b/tests/fig42-dff/dff.model.xml
@@ -0,0 +1,12 @@
+<models xmlns:xi="http://www.w3.org/2001/XInclude">
+  <!-- https://docs.verilogtorouting.org/en/latest/tutorials/arch/timing_modeling/#sequential-block-no-internal-paths -->
+  <model name="dff">
+    <input_ports>
+      <port name="d" clock="clk"/>
+      <port name="clk" is_clock="1"/>
+    </input_ports>
+    <output_ports>
+      <port name="q" clock="clk"/>
+    </output_ports>
+  </model>
+</models>
diff --git a/tests/fig42-dff/dff.sim.v b/tests/fig42-dff/dff.sim.v
new file mode 100644
index 0000000..205f8fc
--- /dev/null
+++ b/tests/fig42-dff/dff.sim.v
@@ -0,0 +1,51 @@
+//`include "../../../../vpr/ff/vpr_ff.sim.v"
+
+module dff (d, clk, q);
+	input wire d;
+	input wire clk;
+	output wire q;
+
+	always @ ( posedge clk ) begin
+		q <= d;
+	end
+	/*
+        VPR_FF ff(
+                .D(d),
+                .clk(clk),
+                .Q(q),
+        );
+	*/
+
+`ifndef YOSYS
+	specify
+		specparam
+			tplh$CLK$QP = 1.0,
+			tphl$CLK$QP = 1.0,
+			tplh$CLK$QN = 1.0,
+			tphl$CLK$QN = 1.0,
+			tsetup$D$CLK = 1.0,
+			thold$D$CLK = 1.0,
+			tminpwl$CLK = 1.0,
+			tminpwh$CLK = 1.0;
+
+		// PATH DELAYS
+		if (flag)
+			// Polarity of QP is positive referenced to D
+			(posedge CLK *> (QP +: D)) = (tplh$CLK$QP, tphl$CLK$QP);
+		if (flag)
+			// Polarity of QN is negative referenced to D
+			(posedge CLK *> (QN -: D)) = (tplh$CLK$QN, tphl$CLK$QN);
+
+		// SETUP AND HOLD CHECKS
+		$setuphold(posedge CLK &&& (flag == 1), posedge D, tsetup$D$CLK, thold$D$CLK, NOTIFIER);
+
+		$setuphold(posedge CLK &&& (flag == 1), negedge D, tsetup$D$CLK, thold$D$CLK, NOTIFIER);
+
+		// MINIMUM WIDTH CHECKING
+		$width(negedge CLK, tminpwl$CLK, 0, NOTIFIER);
+		$width(posedge CLK, tminpwh$CLK, 0, NOTIFIER);
+
+	endspecify
+`endif
+
+endmodule
diff --git a/tests/simple_pll/simple_pll.model.xml b/tests/simple_pll/simple_pll.model.xml
new file mode 100644
index 0000000..356e686
--- /dev/null
+++ b/tests/simple_pll/simple_pll.model.xml
@@ -0,0 +1,10 @@
+<models xmlns:xi="http://www.w3.org/2001/XInclude">
+  <model name="simple_pll">
+    <input_ports>
+      <port name="in_clock" is_clock="1"/>
+    </input_ports>
+    <output_ports>
+      <port name="out_clock" is_clock="1"/>
+    </output_ports>
+  </model>
+</models>
diff --git a/tests/simple_pll/simple_pll.sim.v b/tests/simple_pll/simple_pll.sim.v
new file mode 100644
index 0000000..d8a0cb5
--- /dev/null
+++ b/tests/simple_pll/simple_pll.sim.v
@@ -0,0 +1,15 @@
+/* Simple model of a PLL which divides the input block by 64 */
+module simple_pll (in_clock, out_clock);
+
+	input wire in_clock;
+
+	(* CLOCK *)
+	output wire out_clock;
+
+	reg [63:0] counter;
+	always @(posedge in_clock) begin
+		counter = counter + 1;
+	end
+
+	assign out_clock = counter[63];
+endmodule