| |
| # Pinout for the iCE40-HX8K Breakout Board |
| |
| set_io clk J3 |
| |
| set_io flash_csb R12 |
| set_io flash_clk R11 |
| set_io flash_io0 P12 |
| set_io flash_io1 P11 |
| |
| # for QSPI mode the flash chip on the iCE40-HX8K Breakout Board |
| # must be replaced with one that supports QSPI and the IO2 and IO3 |
| # pins must be soldered to T9 and P8 (center on J3) |
| #set_io flash_io2 T9 |
| #set_io flash_io3 P8 |
| |
| set_io ser_tx B12 |
| set_io ser_rx B10 |
| |
| # left on J3 |
| #set_io debug_ser_tx T1 |
| #set_io debug_ser_rx R3 |
| |
| # right on J3 |
| #set_io debug_flash_csb T15 |
| #set_io debug_flash_clk R16 |
| #set_io debug_flash_io0 N12 |
| #set_io debug_flash_io1 P13 |
| #set_io debug_flash_io2 T13 |
| #set_io debug_flash_io3 T14 |
| |
| set_io leds[7] B5 # D9 |
| set_io leds[6] B4 # D8 |
| set_io leds[5] A2 # D7 |
| set_io leds[4] A1 # D6 |
| set_io leds[3] C5 # D5 |
| set_io leds[2] C4 # D4 |
| set_io leds[1] B3 # D3 |
| set_io leds[0] C3 # D2 |
| |
