| # Copyright (C) 2022 F4PGA Authors | |
| # | |
| # Licensed under the Apache License, Version 2.0 (the "License"); | |
| # you may not use this file except in compliance with the License. | |
| # You may obtain a copy of the License at | |
| # | |
| # http://www.apache.org/licenses/LICENSE-2.0 | |
| # | |
| # Unless required by applicable law or agreed to in writing, software | |
| # distributed under the License is distributed on an "AS IS" BASIS, | |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. | |
| # See the License for the specific language governing permissions and | |
| # limitations under the License. | |
| # | |
| # SPDX-License-Identifier: Apache-2.0 | |
| xc7a50t: &xc7 | |
| values: | |
| device: xc7a50t_test | |
| bitstream_device: artix7 | |
| pinmap: '${shareDir}/arch/xc7a50t_test/vpr_grid_map.csv' | |
| arch_def: '${shareDir}/arch/xc7a50t_test/arch.timing.xml' | |
| rr_graph_lookahead_bin: '${shareDir}/arch/xc7a50t_test/rr_graph_xc7a50t_test.lookahead.bin' | |
| rr_graph_real_bin: '${shareDir}/arch/xc7a50t_test/rr_graph_xc7a50t_test.rr_graph.real.bin' | |
| vpr_place_delay: '${shareDir}/arch/xc7a50t_test/rr_graph_xc7a50t_test.place_delay.bin' | |
| vpr_grid_layout_name: xc7a50t-test | |
| vpr_options: &xc7-vpr_options | |
| max_router_iterations: 500 | |
| routing_failure_predictor: 'off' | |
| router_high_fanout_threshold: -1 | |
| constant_net_method: route | |
| route_chan_width: 500 | |
| router_heap: bucket | |
| clock_modeling: route | |
| place_delta_delay_matrix_calculation_method: dijkstra | |
| place_delay_model: delta | |
| router_lookahead: extended_map | |
| check_route: quick | |
| strict_checks: 'off' | |
| allow_dangling_combinational_nodes: 'on' | |
| disable_errors: 'check_unbuffered_edges:check_route' | |
| congested_routing_iteration_threshold: '0.8' | |
| incremental_reroute_delay_ripup: 'off' | |
| base_cost_type: delay_normalized_length_bounded | |
| bb_factor: 10 | |
| acc_fac: '0.7' | |
| astar_fac: '1.8' | |
| initial_pres_fac: '2.828' | |
| pres_fac_mult: '1.2' | |
| check_rr_graph: 'off' | |
| suppress_warnings: >- | |
| ${noisyWarnings},sum_pin_class:check_unbuffered_edges:load_rr_indexed_data_T_values:check_rr_node:trans_per_R:check_route:set_rr_graph_tool_comment:calculate_average_switch | |
| stages: | |
| mk_build_dir: | |
| module: 'mkdirs' | |
| params: | |
| build_dir: 'build/${device}' | |
| synth: | |
| module: 'yosys' | |
| params: | |
| takes: | |
| - xdc? | |
| produces: | |
| - sdc | |
| - synth_v | |
| prod_meta: | |
| sdc: Standard Design Constraints file for X7 series. | |
| values: | |
| tcl_scripts: '${shareDir}/scripts/xc7' | |
| yosys_tcl_env: | |
| USE_ROI: 'FALSE' | |
| TOP: '${top}' | |
| OUT_JSON: '${:json}' | |
| OUT_SDC: '${:sdc}' | |
| PART_JSON: '${prjxray_db}/${bitstream_device}/${part_name}/part.json' | |
| OUT_FASM_EXTRA: '${:fasm_extra}' | |
| TECHMAP_PATH: '${shareDir}/techmaps/xc7_vpr/techmap' | |
| OUT_SYNTH_V: '${:synth_v}' | |
| SYNTH_JSON: '${:synth_json}' | |
| OUT_EBLIF: '${:eblif}' | |
| PYTHON3: '${python3}' | |
| UTILS_PATH: '${shareDir}/scripts' | |
| INPUT_XDC_FILES: '${:xdc}' | |
| pack: | |
| module: 'pack' | |
| ioplace: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: ioplace | |
| interpreter: '${python3}' | |
| script: ['-m', 'f4pga.utils.xc7.create_ioplace'] | |
| outputs: | |
| io_place: | |
| mode: stdout | |
| target: '${:net[noext]}.ioplace' | |
| inputs: | |
| blif: '${:eblif}' | |
| map: '${shareDir}/arch/${device}/${part_name}/pinmap.csv' | |
| net: '${:net}' | |
| pcf: '${:pcf?}' | |
| $PYTHONPATH: '${binDir}/python/' | |
| place_constraints: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: place_constraints | |
| interpreter: '${python3}' | |
| script: ['-m', 'f4pga.utils.xc7.create_place_constraints'] | |
| outputs: | |
| place_constraints: | |
| mode: stdout | |
| target: '${:net[noext]}.preplace' | |
| inputs: | |
| net: '${:net}' | |
| arch: '${shareDir}/arch/${device}/arch.timing.xml' | |
| blif: '${:eblif}' | |
| input: '${:io_place}' | |
| db_root: '${prjxray_db}' | |
| part: '${part_name}' | |
| vpr_grid_map: '${shareDir}/arch/${device}/vpr_grid_map.csv' | |
| $PYTHONPATH: '${binDir}/python/' | |
| place: | |
| module: 'place' | |
| route: | |
| module: 'route' | |
| fasm: | |
| module: 'fasm' | |
| bitstream: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: bitstream | |
| script: xcfasm | |
| outputs: | |
| bitstream: | |
| mode: file | |
| file: '${:fasm[noext]}.bit' | |
| target: '${:fasm[noext]}.bit' | |
| inputs: | |
| db-root: '${prjxray_db}/${bitstream_device}' | |
| part: '${part_name}' | |
| part_file: '${prjxray_db}/${bitstream_device}/${part_name}/part.yaml' | |
| sparse: true | |
| emit_pudc_b_pullup: true | |
| fn_in: '${:fasm}' | |
| frm2bit: xc7frames2bit | |
| bit_out: '${:fasm[noext]}.bit' | |
| xc7a100t: | |
| <<: *xc7 | |
| values: | |
| device: xc7a100t_test | |
| bitstream_device: artix7 | |
| pinmap: '${shareDir}/arch/xc7a100t_test/vpr_grid_map.csv' | |
| arch_def: '${shareDir}/arch/xc7a100t_test/arch.timing.xml' | |
| rr_graph_lookahead_bin: '${shareDir}/arch/xc7a100t_test/rr_graph_xc7a100t_test.lookahead.bin' | |
| rr_graph_real_bin: '${shareDir}/arch/xc7a100t_test/rr_graph_xc7a100t_test.rr_graph.real.bin' | |
| vpr_place_delay: '${shareDir}/arch/xc7a100t_test/rr_graph_xc7a100t_test.place_delay.bin' | |
| vpr_grid_layout_name: xc7a100t-test | |
| vpr_options: *xc7-vpr_options | |
| xc7a200t: | |
| <<: *xc7 | |
| values: | |
| device: xc7a200t_test | |
| bitstream_device: artix7 | |
| pinmap: '${shareDir}/arch/xc7a200t_test/vpr_grid_map.csv' | |
| arch_def: '${shareDir}/arch/xc7a200t_test/arch.timing.xml' | |
| rr_graph_lookahead_bin: '${shareDir}/arch/xc7a200t_test/rr_graph_xc7a200t_test.lookahead.bin' | |
| rr_graph_real_bin: '${shareDir}/arch/xc7a200t_test/rr_graph_xc7a200t_test.rr_graph.real.bin' | |
| vpr_place_delay: '${shareDir}/arch/xc7a200t_test/rr_graph_xc7a200t_test.place_delay.bin' | |
| vpr_grid_layout_name: xc7a200t-test | |
| vpr_options: *xc7-vpr_options | |
| ice40: | |
| values: | |
| device: ICE40UP5K | |
| nextpnr_options: | |
| hx1k: true | |
| stages: | |
| mk_build_dir: | |
| module: 'mkdirs' | |
| params: | |
| build_dir: build/${device} | |
| synth: | |
| module: 'yosys' | |
| params: | |
| takes: | |
| produces: | |
| prod_meta: | |
| values: | |
| yosys_tcl_env: | |
| OUT_JSON: '${:json}' | |
| pnr: | |
| module: 'nextpnr_ice40' | |
| values: | |
| placer: heap | |
| router: router1 | |
| bitstream: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: bitstream | |
| script: icepack | |
| outputs: | |
| bitstream: | |
| mode: file | |
| file: "${:ice_asm[noext]}.bit" | |
| target: "${:ice_asm[noext]}.bit" | |
| inputs: | |
| "#1": "${:ice_asm}" | |
| "#2": "${:ice_asm[noext]}.bit" | |
| ql-eos-s3: | |
| values: | |
| device: ql-eos-s3 | |
| device_alt: ql-eos-s3_wlcsp | |
| pinmap: '${shareDir}/arch/ql-eos-s3_wlcsp/pinmap_${package}.csv' | |
| arch_def: '${shareDir}/arch/ql-eos-s3_wlcsp/arch.timing.xml' | |
| rr_graph_lookahead_bin: '${shareDir}/arch/ql-eos-s3_wlcsp/rr_graph_ql-eos-s3_wlcsp.lookahead.bin' | |
| rr_graph_real_bin: '${shareDir}/arch/ql-eos-s3_wlcsp/rr_graph_ql-eos-s3_wlcsp.rr_graph.real.bin' | |
| vpr_place_delay: '${shareDir}/arch/ql-eos-s3_wlcsp/rr_graph_ql-eos-s3_wlcsp.place_delay.bin' | |
| vpr_grid_layout_name: ql-eos-s3 | |
| vpr_options: | |
| max_router_iterations: 500 | |
| routing_failure_predictor: 'off' | |
| router_high_fanout_threshold: -1 | |
| constant_net_method: route | |
| route_chan_width: 100 | |
| clock_modeling: route | |
| place_delay_model: delta_override | |
| router_lookahead: extended_map | |
| check_route: quick | |
| strict_checks: 'off' | |
| allow_dangling_combinational_nodes: 'on' | |
| disable_errors: 'check_unbuffered_edges:check_route' | |
| congested_routing_iteration_threshold: '0.8' | |
| incremental_reroute_delay_ripup: 'off' | |
| base_cost_type: delay_normalized_length_bounded | |
| bb_factor: '10' | |
| initial_pres_fac: '4.0' | |
| check_rr_graph: 'off' | |
| pack_high_fanout_threshold: 'PB-lOGIC:18' | |
| suppress_warnings: >- | |
| ${noisyWarnings},sum_pin_class:check_unbuffered_edges:load_rr_indexed_data_T_values:check_rr_node:trans_per_R:check_route:set_rr_graph_tool_comment | |
| stages: | |
| mk_build_dir: | |
| module: 'mkdirs' | |
| params: | |
| build_dir: 'build/${device}' | |
| synth: | |
| module: 'yosys' | |
| params: | |
| takes: | |
| - pcf? | |
| produces: | |
| - synth_v | |
| values: | |
| tcl_scripts: '${shareDir}/scripts/pp3' | |
| read_verilog_args: [] | |
| yosys_tcl_env: | |
| OUT_JSON: '${:json}' | |
| SYNTH_JSON: '${:synth_json}' | |
| OUT_SYNTH_V: '${:synth_v}' | |
| OUT_EBLIF: '${:eblif}' | |
| OUT_FASM_EXTRA: '${:fasm_extra}' | |
| TECHMAP_PATH: '${shareDir}/techmaps/pp3' | |
| DEVICE_CELLS_SIM: '${shareDir}/arch/ql-eos-s3_wlcsp/cells/ram_sim.v' | |
| DEVICE_CELLS_MAP: '${shareDir}/arch/ql-eos-s3_wlcsp/cells/ram_map.v' | |
| PINMAP_FILE: '${shareDir}/arch/ql-eos-s3_wlcsp/pinmap_${package}.csv' | |
| PCF_FILE: '${:pcf}' | |
| PYTHON3: '${python3}' | |
| UTILS_PATH: '${shareDir}/scripts' | |
| prepare_sdc: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: prepare_sdc | |
| interpreter: '${python3}' | |
| script: ['-m', 'f4pga.utils.quicklogic.process_sdc_constraints'] | |
| outputs: | |
| sdc: | |
| mode: file | |
| file: '${:eblif[noext]}.sdc' | |
| target: '${:eblif[noext]}.sdc' | |
| inputs: | |
| eblif: '${:eblif}' | |
| sdc-in: '${:sdc-in}' | |
| sdc-out: '${:eblif[noext]}.sdc' | |
| pcf: '${:pcf}' | |
| pin-map: '' | |
| $PYTHONPATH: '${shareDir}/scripts/' | |
| pack: | |
| module: 'pack' | |
| values: | |
| device: ql-eos-s3 | |
| device_alt: ql-eos-s3_wlcsp | |
| pinmap: '${shareDir}/arch/ql-eos-s3_wlcsp/pinmap_${package}.csv' | |
| arch_def: '${shareDir}/arch/ql-eos-s3_wlcsp/arch.timing.xml' | |
| rr_graph_lookahead_bin: '${shareDir}/arch/ql-eos-s3_wlcsp/rr_graph_ql-eos-s3_wlcsp.lookahead.bin' | |
| rr_graph_real_bin: >- | |
| ${shareDir}/arch/ql-eos-s3_wlcsp/rr_graph_ql-eos-s3_wlcsp.rr_graph.real.bin | |
| vpr_place_delay: >- | |
| ${shareDir}/arch/ql-eos-s3_wlcsp/rr_graph_ql-eos-s3_wlcsp.place_delay.bin | |
| vpr_grid_layout_name: ql-eos-s3 | |
| vpr_options: | |
| write_block_usage: block_usage.json | |
| max_router_iterations: 500 | |
| routing_failure_predictor: 'off' | |
| router_high_fanout_threshold: -1 | |
| constant_net_method: route | |
| route_chan_width: 100 | |
| clock_modeling: route | |
| place_delay_model: delta_override | |
| router_lookahead: extended_map | |
| check_route: quick | |
| strict_checks: 'off' | |
| allow_dangling_combinational_nodes: 'on' | |
| disable_errors: 'check_unbuffered_edges:check_route' | |
| congested_routing_iteration_threshold: '0.8' | |
| incremental_reroute_delay_ripup: 'off' | |
| base_cost_type: delay_normalized_length_bounded | |
| bb_factor: '10' | |
| initial_pres_fac: '4.0' | |
| check_rr_graph: 'off' | |
| pack_high_fanout_threshold: 'PB-lOGIC:18' | |
| suppress_warnings: >- | |
| ${noisyWarnings},sum_pin_class:check_unbuffered_edges:load_rr_indexed_data_T_values:check_rr_node:trans_per_R:check_route:set_rr_graph_tool_comment | |
| ioplace: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: ioplace | |
| interpreter: '${python3}' | |
| script: ['-m', 'f4pga.utils.quicklogic.pp3.create_ioplace'] | |
| outputs: | |
| io_place: | |
| mode: stdout | |
| target: '${:eblif[noext]}.ioplace' | |
| inputs: | |
| blif: '${:eblif}' | |
| net: '${:net}' | |
| pcf: '${:pcf}' | |
| map: '${shareDir}/arch/ql-eos-s3_wlcsp/pinmap_${package}.csv' | |
| $PYTHONPATH: '${shareDir}/scripts/' | |
| place_constraints: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: place_constraints | |
| interpreter: '${python3}' | |
| script: ['-m', 'f4pga.utils.quicklogic.pp3.create_place_constraints'] | |
| outputs: | |
| place_constraints: | |
| mode: stdout | |
| target: '${:eblif[noext]}_constraints.place' | |
| inputs: | |
| blif: '${:eblif}' | |
| map: '${shareDir}/arch/ql-eos-s3_wlcsp/clkmap_${package}.csv' | |
| i: '${:io_place}' | |
| $PYTHONPATH: '${shareDir}/scripts/' | |
| place: | |
| module: 'place' | |
| iomux_jlink: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: iomux_jlink | |
| interpreter: '${python3}' | |
| script: ['-m', 'f4pga.utils.quicklogic.pp3.eos-s3.iomux_config'] | |
| outputs: | |
| iomux_jlink: | |
| mode: stdout | |
| target: '${:eblif[noext]}_iomux.jlink' | |
| inputs: | |
| eblif: '${:eblif}' | |
| pcf: '${:pcf}' | |
| map: '${shareDir}/arch/ql-eos-s3_wlcsp/pinmap_${package}.csv' | |
| output-format: jlink | |
| $PYTHONPATH: '${shareDir}/scripts/' | |
| iomux_openocd: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: iomux_openocd | |
| interpreter: '${python3}' | |
| script: ['-m', 'f4pga.utils.quicklogic.pp3.eos-s3.iomux_config'] | |
| outputs: | |
| iomux_openocd: | |
| mode: stdout | |
| target: '${:eblif[noext]}_iomux.openocd' | |
| inputs: | |
| eblif: '${:eblif}' | |
| pcf: '${:pcf}' | |
| map: '${shareDir}/arch/ql-eos-s3_wlcsp/pinmap_${package}.csv' | |
| output-format: openocd | |
| $PYTHONPATH: '${shareDir}/scripts/' | |
| iomux_binary: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: iomux_binary | |
| interpreter: '${python3}' | |
| script: ['-m', 'f4pga.utils.quicklogic.pp3.eos-s3.iomux_config'] | |
| outputs: | |
| iomux_binary: | |
| mode: stdout | |
| target: '${:eblif[noext]}_iomux.bin' | |
| inputs: | |
| eblif: '${:eblif}' | |
| pcf: '${:pcf}' | |
| map: '${shareDir}/arch/ql-eos-s3_wlcsp/pinmap_${package}.csv' | |
| output-format: binary | |
| $PYTHONPATH: '${shareDir}/scripts/' | |
| route: | |
| module: 'route' | |
| values: | |
| device: ql-eos-s3 | |
| device_alt: ql-eos-s3_wlcsp | |
| pinmap: '${shareDir}/arch/ql-eos-s3_wlcsp/pinmap_${package}.csv' | |
| arch_def: '${shareDir}/arch/ql-eos-s3_wlcsp/arch.timing.xml' | |
| rr_graph_lookahead_bin: '${shareDir}/arch/ql-eos-s3_wlcsp/rr_graph_ql-eos-s3_wlcsp.lookahead.bin' | |
| rr_graph_real_bin: >- | |
| ${shareDir}/arch/ql-eos-s3_wlcsp/rr_graph_ql-eos-s3_wlcsp.rr_graph.real.bin | |
| vpr_place_delay: >- | |
| ${shareDir}/arch/ql-eos-s3_wlcsp/rr_graph_ql-eos-s3_wlcsp.place_delay.bin | |
| vpr_grid_layout_name: ql-eos-s3 | |
| vpr_options: | |
| write_timing_summary: timing_summary.json | |
| max_router_iterations: 500 | |
| routing_failure_predictor: 'off' | |
| router_high_fanout_threshold: -1 | |
| constant_net_method: route | |
| route_chan_width: 100 | |
| clock_modeling: route | |
| place_delay_model: delta_override | |
| router_lookahead: extended_map | |
| check_route: quick | |
| strict_checks: 'off' | |
| allow_dangling_combinational_nodes: 'on' | |
| disable_errors: 'check_unbuffered_edges:check_route' | |
| congested_routing_iteration_threshold: '0.8' | |
| incremental_reroute_delay_ripup: 'off' | |
| base_cost_type: delay_normalized_length_bounded | |
| bb_factor: '10' | |
| initial_pres_fac: '4.0' | |
| check_rr_graph: 'off' | |
| pack_high_fanout_threshold: 'PB-lOGIC:18' | |
| suppress_warnings: >- | |
| ${noisyWarnings},sum_pin_class:check_unbuffered_edges:load_rr_indexed_data_T_values:check_rr_node:trans_per_R:check_route:set_rr_graph_tool_comment | |
| analysis: | |
| module: 'analysis' | |
| values: | |
| device: ql-eos-s3 | |
| device_alt: ql-eos-s3_wlcsp | |
| pinmap: '${shareDir}/arch/ql-eos-s3_wlcsp/pinmap_${package}.csv' | |
| arch_def: '${shareDir}/arch/ql-eos-s3_wlcsp/arch.timing.xml' | |
| rr_graph_lookahead_bin: '${shareDir}/arch/ql-eos-s3_wlcsp/rr_graph_ql-eos-s3_wlcsp.lookahead.bin' | |
| rr_graph_real_bin: >- | |
| ${shareDir}/arch/ql-eos-s3_wlcsp/rr_graph_ql-eos-s3_wlcsp.rr_graph.real.bin | |
| vpr_place_delay: >- | |
| ${shareDir}/arch/ql-eos-s3_wlcsp/rr_graph_ql-eos-s3_wlcsp.place_delay.bin | |
| vpr_grid_layout_name: ql-eos-s3 | |
| vpr_options: | |
| gen_post_synthesis_netlist: 'on' | |
| gen_post_implementation_merged_netlist: 'on' | |
| post_synth_netlist_unconn_inputs: nets | |
| post_synth_netlist_unconn_outputs: nets | |
| verify_file_digests: 'off' | |
| max_router_iterations: 500 | |
| routing_failure_predictor: 'off' | |
| router_high_fanout_threshold: -1 | |
| constant_net_method: route | |
| route_chan_width: 100 | |
| clock_modeling: route | |
| place_delay_model: delta_override | |
| router_lookahead: extended_map | |
| check_route: quick | |
| strict_checks: 'off' | |
| allow_dangling_combinational_nodes: 'on' | |
| disable_errors: 'check_unbuffered_edges:check_route' | |
| congested_routing_iteration_threshold: '0.8' | |
| incremental_reroute_delay_ripup: 'off' | |
| base_cost_type: delay_normalized_length_bounded | |
| bb_factor: '10' | |
| initial_pres_fac: '4.0' | |
| check_rr_graph: 'off' | |
| pack_high_fanout_threshold: 'PB-lOGIC:18' | |
| suppress_warnings: >- | |
| ${noisyWarnings},sum_pin_class:check_unbuffered_edges:load_rr_indexed_data_T_values:check_rr_node:trans_per_R:check_route:set_rr_graph_tool_comment | |
| fasm: | |
| module: 'fasm' | |
| bitstream: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: bitstream | |
| script: qlfasm | |
| outputs: | |
| bitstream: | |
| mode: file | |
| file: '${:eblif[noext]}.bit' | |
| target: '${:eblif[noext]}.bit' | |
| bitstream_log: | |
| mode: stdout | |
| target: '${:eblif[noext]}.bit.log' | |
| inputs: | |
| '#1': '${:fasm}' | |
| '#2': '${:eblif[noext]}.bit' | |
| dev-type: ql-eos-s3 | |
| values: | |
| build_dir: . | |
| bitstream_bitheader: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: bitstream_bitheader | |
| script: symbiflow_write_bitheader | |
| outputs: | |
| bitstream_bitheader: | |
| mode: file | |
| file: '${:bitstream}.h' | |
| target: '${:bitstream}.h' | |
| bitstream_bitheader_log: | |
| mode: stdout | |
| target: '${:bitstream}.h.log' | |
| inputs: | |
| '#1': '${:bitstream}' | |
| '#2': '${:bitstream}.h' | |
| '#3': '${:iomux_binary}' | |
| bitstream_jlink: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: bitstream_jlink | |
| script: symbiflow_write_jlink | |
| outputs: | |
| bitstream_jlink: | |
| mode: file | |
| file: '${:bitstream}.jlink' | |
| target: '${:bitstream}.jlink' | |
| bitstream_jlink_log: | |
| mode: stdout | |
| target: '${:bitstream}.jlink.log' | |
| inputs: | |
| '#1': '${:bitstream}' | |
| '#2': '${:bitstream}.jlink' | |
| '#3': '${:iomux_jlink}' | |
| bitstream_openocd: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: bitstream_openocd | |
| script: symbiflow_write_openocd | |
| outputs: | |
| bitstream_openocd: | |
| mode: file | |
| file: '${:bitstream}.openocd' | |
| target: '${:bitstream}.openocd' | |
| bitstream_openocd_log: | |
| mode: stdout | |
| target: '${:bitstream}.openocd.log' | |
| inputs: | |
| '#1': '${:bitstream}' | |
| '#2': '${:bitstream}.openocd' | |
| '#3': '${:iomux_openocd}' | |
| bitstream_binary: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: bitstream_binary | |
| script: symbiflow_write_binary | |
| outputs: | |
| bitstream_binary: | |
| mode: file | |
| file: '${:bitstream}.bin' | |
| target: '${:bitstream}.bin' | |
| bitstream_binary_log: | |
| mode: stdout | |
| target: '${:bitstream}.bin.log' | |
| inputs: | |
| '#1': '${:bitstream}' | |
| '#2': '${:bitstream}.bin' | |
| '#3': '${:iomux_binary}' | |
| fasm2bels: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: fasm2bels | |
| script: symbiflow_fasm2bels | |
| outputs: | |
| fasm2bels_verilog: | |
| mode: file | |
| file: '${:bitstream}.v' | |
| target: '${:bitstream}.v' | |
| fasm2bels_pcf: | |
| mode: file | |
| file: '${:bitstream}.pcf' | |
| target: '${:bitstream}.pcf' | |
| fasm2bels_qcf: | |
| mode: file | |
| file: '${:bitstream}.qcf' | |
| target: '${:bitstream}.qcf' | |
| fasm2bels_log: | |
| mode: stdout | |
| target: '${:bitstream}.log' | |
| inputs: | |
| device: '${device}' | |
| part: '${package}' | |
| pcf: '${:pcf}' | |
| bit: '${:bitstream}' | |
| out-verilog: '${:bitstream}.v' | |
| out-pcf: '${:bitstream}.pcf' | |
| out-qcf: '${:bitstream}.qcf' | |
| $F4PGA_INSTALL_DIR: '${shareDir}/../../../' | |
| $FPGA_FAM: eos-s3 | |
| $PATH: '${shareDir}/../../conda/envs/eos-s3/bin/:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin' | |
| $BIN_DIR_PATH: '${binDir}' | |
| ql-k4n8_fast: &ql-k4n8 | |
| values: | |
| device: qlf_k4n8_umc22 | |
| rr_graph_lookahead_bin: >- | |
| ${shareDir}/arch/qlf_k4n8-qlf_k4n8_umc22_fast_qlf_k4n8-qlf_k4n8_umc22_fast/rr_graph_qlf_k4n8-qlf_k4n8_umc22_fast_qlf_k4n8-qlf_k4n8_umc22_fast.lookahead.bin | |
| rr_graph_real_bin: >- | |
| ${shareDir}/arch/qlf_k4n8-qlf_k4n8_umc22_fast_qlf_k4n8-qlf_k4n8_umc22_fast/qlf_k4n8-qlf_k4n8_umc22_fast.rr_graph.bin | |
| vpr_place_delay: >- | |
| ${shareDir}/arch/qlf_k4n8-qlf_k4n8_umc22_fast_qlf_k4n8-qlf_k4n8_umc22_fast/rr_graph_qlf_k4n8-qlf_k4n8_umc22_fast_qlf_k4n8-qlf_k4n8_umc22_fast.place_delay.bin | |
| vpr_grid_layout_name: qlf_k4n8-qlf_k4n8_umc22_fast | |
| arch_def: >- | |
| ${shareDir}/arch/qlf_k4n8-qlf_k4n8_umc22_fast_qlf_k4n8-qlf_k4n8_umc22_fast/arch_qlf_k4n8-qlf_k4n8_umc22_fast_qlf_k4n8-qlf_k4n8_umc22_fast.xml | |
| vpr_options: &ql-k4n8-vpr_options | |
| max_router_iterations: 500 | |
| routing_failure_predictor: 'off' | |
| router_high_fanout_threshold: -1 | |
| constant_net_method: route | |
| route_chan_width: 100 | |
| clock_modeling: ideal | |
| place_delta_delay_matrix_calculation_method: dijkstra | |
| place_delay_model: delta_override | |
| router_lookahead: extended_map | |
| allow_dangling_combinational_nodes: 'on' | |
| absorb_buffer_luts: 'off' | |
| stages: &ql-k4n8-stages | |
| mk_build_dir: | |
| module: 'mkdirs' | |
| params: | |
| build_dir: 'build/${device}' | |
| synth: | |
| module: 'yosys' | |
| params: | |
| produces: | |
| - synth_v | |
| values: | |
| tcl_scripts: '${shareDir}/scripts/qlf_k4n8' | |
| read_verilog_args: [] | |
| yosys_tcl_env: | |
| TOP: '${top}' | |
| OUT_JSON: '${:json}' | |
| SYNTH_JSON: '${:synth_json}' | |
| TECHMAP_PATH: '${shareDir}/techmaps/qlf_k4n8' | |
| OUT_SYNTH_V: '${:synth_v}' | |
| OUT_EBLIF: '${:eblif}' | |
| PYTHON3: '${python3}' | |
| pack: | |
| module: 'pack' | |
| ioplace: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: ioplace | |
| interpreter: '${python3}' | |
| script: ['-m', 'f4pga.utils.quicklogic.qlf_k4n8.create_ioplace'] | |
| outputs: | |
| io_place: | |
| mode: stdout | |
| target: '${:eblif[noext]}.ioplace' | |
| inputs: | |
| blif: '${:eblif}' | |
| net: '${:net}' | |
| pcf: '${:pcf}' | |
| pinmap_xml: >- | |
| ${shareDir}/arch/qlf_k4n8-qlf_k4n8_umc22_fast_qlf_k4n8-qlf_k4n8_umc22_fast/pinmap_qlf_k4n8_umc22.xml | |
| csv_file: >- | |
| ${shareDir}/arch/qlf_k4n8-qlf_k4n8_umc22_fast_qlf_k4n8-qlf_k4n8_umc22_fast/pinmap_qlf_k4n8_umc22.csv | |
| $PYTHONPATH: '${binDir}/python/' | |
| repack: &ql-k4n8-stages-repack | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: repack | |
| interpreter: '${python3}' | |
| script: ['-m', 'f4pga.utils.quicklogic.repacker.repack'] | |
| outputs: | |
| eblif_repacked: | |
| mode: file | |
| file: '${:eblif[noext]}_repacked.eblif' | |
| target: '${:eblif[noext]}_repacked.eblif' | |
| place_repacked: | |
| mode: file | |
| file: '${:place[noext]}_repacked.place' | |
| target: '${:place[noext]}_repacked.place' | |
| net_repacked: | |
| mode: file | |
| file: '${:net[noext]}_repacked.net' | |
| target: '${:net[noext]}_repacked.net' | |
| repack_log: | |
| mode: stdout | |
| target: '${top}.repack.log' | |
| inputs: | |
| eblif-in: '${:eblif}' | |
| net-in: '${:net}' | |
| place-in: '${:place}' | |
| eblif-out: '${:eblif[noext]}_repacked.eblif' | |
| place-out: '${:place[noext]}_repacked.place' | |
| net-out: '${:net[noext]}_repacked.net' | |
| absorb_buffer_luts: 'on' | |
| vpr-arch: '${arch_def}' | |
| repacking-rules: '${repacking_rules}' | |
| json-constraints: '${json_constraints?}' | |
| pcf-constraints: '${pcf?}' | |
| $PYTHONPATH: '${binDir}/python/' | |
| values: | |
| repacking_rules: >- | |
| ${shareDir}/arch/qlf_k4n8-qlf_k4n8_umc22_fast_qlf_k4n8-qlf_k4n8_umc22_fast/qlf_k4n8-qlf_k4n8_umc22_fast.repacking_rules.json | |
| place: | |
| module: 'place' | |
| route: | |
| module: 'io_rename' | |
| params: | |
| module: 'route' | |
| rename_takes: | |
| eblif: eblif_repacked | |
| place: place_repacked | |
| net: net_repacked | |
| fasm: | |
| module: 'io_rename' | |
| params: | |
| module: 'fasm' | |
| rename_takes: | |
| eblif: eblif_repacked | |
| place: place_repacked | |
| net: net_repacked | |
| bitstream: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: bitstream | |
| script: qlf_fasm | |
| outputs: | |
| bitstream: | |
| mode: file | |
| file: '${:fasm[noext]}.bit' | |
| target: '${:fasm[noext]}.bit' | |
| inputs: | |
| '#1': '${:fasm}' | |
| '#2': '${:fasm[noext]}.bit' | |
| db-root: '${shareDir}/fasm_database/qlf_k4n8' | |
| format: 4byte | |
| assemble: true | |
| ql-k4n8_slow: | |
| <<: *ql-k4n8 | |
| values: | |
| device: qlf_k4n8_umc22 | |
| rr_graph_lookahead_bin: >- | |
| ${shareDir}/arch/qlf_k4n8-qlf_k4n8_umc22_slow_qlf_k4n8-qlf_k4n8_umc22_slow/rr_graph_qlf_k4n8-qlf_k4n8_umc22_slow_qlf_k4n8-qlf_k4n8_umc22_slow.lookahead.bin | |
| rr_graph_real_bin: >- | |
| ${shareDir}/arch/qlf_k4n8-qlf_k4n8_umc22_slow_qlf_k4n8-qlf_k4n8_umc22_slow/qlf_k4n8-qlf_k4n8_umc22_slow.rr_graph.bin | |
| vpr_place_delay: >- | |
| ${shareDir}/arch/qlf_k4n8-qlf_k4n8_umc22_slow_qlf_k4n8-qlf_k4n8_umc22_slow/rr_graph_qlf_k4n8-qlf_k4n8_umc22_slow_qlf_k4n8-qlf_k4n8_umc22_slow.place_delay.bin | |
| vpr_grid_layout_name: qlf_k4n8-qlf_k4n8_umc22_slow | |
| arch_def: >- | |
| ${shareDir}/arch/qlf_k4n8-qlf_k4n8_umc22_slow_qlf_k4n8-qlf_k4n8_umc22_slow/arch_qlf_k4n8-qlf_k4n8_umc22_slow_qlf_k4n8-qlf_k4n8_umc22_slow.xml | |
| vpr_options: *ql-k4n8-vpr_options | |
| stages: | |
| <<: *ql-k4n8-stages | |
| ioplace: | |
| module: 'generic_script_wrapper' | |
| params: | |
| stage_name: ioplace | |
| interpreter: '${python3}' | |
| script: ['-m', 'f4pga.utils.quicklogic.qlf_k4n8.create_ioplace'] | |
| outputs: | |
| io_place: | |
| mode: stdout | |
| target: '${:eblif[noext]}.ioplace' | |
| inputs: | |
| blif: '${:eblif}' | |
| net: '${:net}' | |
| pcf: '${:pcf}' | |
| pinmap_xml: >- | |
| ${shareDir}/arch/qlf_k4n8-qlf_k4n8_umc22_slow_qlf_k4n8-qlf_k4n8_umc22_slow/pinmap_qlf_k4n8_umc22.xml | |
| csv_file: >- | |
| ${shareDir}/arch/qlf_k4n8-qlf_k4n8_umc22_slow_qlf_k4n8-qlf_k4n8_umc22_slow/pinmap_qlf_k4n8_umc22.csv | |
| $PYTHONPATH: '${binDir}/python/' | |
| repack: | |
| <<: *ql-k4n8-stages-repack | |
| values: | |
| repacking_rules: >- | |
| ${shareDir}/arch/qlf_k4n8-qlf_k4n8_umc22_slow_qlf_k4n8-qlf_k4n8_umc22_slow/qlf_k4n8-qlf_k4n8_umc22_slow.repacking_rules.json |