| //////////////////////////////////////////////// | |
| ////s~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~s//// | |
| ////s www.testbench.in s//// | |
| ////s s//// | |
| ////s OVM Tutorial s//// | |
| ////s s//// | |
| ////s gopi@testbench.in s//// | |
| ////s~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~s//// | |
| //////////////////////////////////////////////// | |
| `ifndef GUARD_DRIVER | |
| `define GUARD_DRIVER | |
| class Driver extends ovm_driver #(Packet); | |
| Configuration cfg; | |
| virtual input_interface.IP input_intf; | |
| virtual mem_interface.MEM mem_intf; | |
| ovm_analysis_port #(Packet) Drvr2Sb_port; | |
| `ovm_component_utils(Driver) | |
| function new( string name = "" , ovm_component parent = null) ; | |
| super.new( name , parent ); | |
| endfunction : new | |
| function void build(); | |
| super.build(); | |
| Drvr2Sb_port = new("Drvr2Sb", this); | |
| endfunction : build | |
| function void end_of_elaboration(); | |
| ovm_object tmp; | |
| super.end_of_elaboration(); | |
| assert(get_config_object("Configuration",tmp)); | |
| $cast(cfg,tmp); | |
| this.input_intf = cfg.input_intf; | |
| this.mem_intf = cfg.mem_intf; | |
| endfunction : end_of_elaboration | |
| task run(); | |
| Packet pkt; | |
| @(posedge input_intf.clock); | |
| reset_dut(); | |
| cfg_dut(); | |
| forever begin | |
| seq_item_port.get_next_item(pkt); | |
| Drvr2Sb_port.write(pkt); | |
| @(posedge input_intf.clock); | |
| drive(pkt); | |
| @(posedge input_intf.clock); | |
| seq_item_port.item_done(); | |
| end | |
| endtask : run | |
| virtual task reset_dut(); | |
| ovm_report_info(get_full_name(),"Start of reset_dut() method ",OVM_LOW); | |
| mem_intf.cb.mem_data <= 0; | |
| mem_intf.cb.mem_add <= 0; | |
| mem_intf.cb.mem_en <= 0; | |
| mem_intf.cb.mem_rd_wr <= 0; | |
| input_intf.cb.data_in <= 0; | |
| input_intf.cb.data_status <= 0; | |
| input_intf.reset <= 1; | |
| repeat (4) @ input_intf.clock; | |
| input_intf.reset <= 0; | |
| ovm_report_info(get_full_name(),"End of reset_dut() method ",OVM_LOW); | |
| endtask : reset_dut | |
| virtual task cfg_dut(); | |
| ovm_report_info(get_full_name(),"Start of cfg_dut() method ",OVM_LOW); | |
| mem_intf.cb.mem_en <= 1; | |
| @(posedge mem_intf.clock); | |
| mem_intf.cb.mem_rd_wr <= 1; | |
| @(posedge mem_intf.clock); | |
| mem_intf.cb.mem_add <= 8'h0; | |
| mem_intf.cb.mem_data <= cfg.device0_add; | |
| ovm_report_info(get_full_name(),$psprintf(" Port 0 Address %h ",cfg.device0_add),OVM_LOW); | |
| @(posedge mem_intf.clock); | |
| mem_intf.cb.mem_add <= 8'h1; | |
| mem_intf.cb.mem_data <= cfg.device1_add; | |
| ovm_report_info(get_full_name(),$psprintf(" Port 1 Address %h ",cfg.device1_add),OVM_LOW); | |
| @(posedge mem_intf.clock); | |
| mem_intf.cb.mem_add <= 8'h2; | |
| mem_intf.cb.mem_data <= cfg.device2_add; | |
| ovm_report_info(get_full_name(),$psprintf(" Port 2 Address %h ",cfg.device2_add),OVM_LOW); | |
| @(posedge mem_intf.clock); | |
| mem_intf.cb.mem_add <= 8'h3; | |
| mem_intf.cb.mem_data <= cfg.device3_add; | |
| ovm_report_info(get_full_name(),$psprintf(" Port 3 Address %h ",cfg.device3_add),OVM_LOW); | |
| @(posedge mem_intf.clock); | |
| mem_intf.cb.mem_en <=0; | |
| mem_intf.cb.mem_rd_wr <= 0; | |
| mem_intf.cb.mem_add <= 0; | |
| mem_intf.cb.mem_data <= 0; | |
| ovm_report_info(get_full_name(),"End of cfg_dut() method ",OVM_LOW); | |
| endtask : cfg_dut | |
| task drive(Packet pkt); | |
| byte unsigned bytes[]; | |
| int pkt_len; | |
| pkt_len = pkt.pack_bytes(bytes); | |
| ovm_report_info(get_full_name(),"Driving packet ...",OVM_LOW); | |
| foreach(bytes[i]) | |
| begin | |
| @(posedge input_intf.clock); | |
| input_intf.cb.data_status <= 1 ; | |
| input_intf.cb.data_in <= bytes[i]; | |
| end | |
| @(posedge input_intf.clock); | |
| input_intf.cb.data_status <= 0 ; | |
| input_intf.cb.data_in <= 0; | |
| repeat(2) @(posedge input_intf.clock); | |
| endtask : drive | |
| endclass : Driver | |
| `endif | |