| //---------------------------------------------------------------------------- | |
| // Copyright (C) 2009 , Olivier Girard | |
| // | |
| // Redistribution and use in source and binary forms, with or without | |
| // modification, are permitted provided that the following conditions | |
| // are met: | |
| // * Redistributions of source code must retain the above copyright | |
| // notice, this list of conditions and the following disclaimer. | |
| // * Redistributions in binary form must reproduce the above copyright | |
| // notice, this list of conditions and the following disclaimer in the | |
| // documentation and/or other materials provided with the distribution. | |
| // * Neither the name of the authors nor the names of its contributors | |
| // may be used to endorse or promote products derived from this software | |
| // without specific prior written permission. | |
| // | |
| // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
| // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE | |
| // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, | |
| // OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | |
| // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS | |
| // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN | |
| // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) | |
| // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF | |
| // THE POSSIBILITY OF SUCH DAMAGE | |
| // | |
| //---------------------------------------------------------------------------- | |
| // | |
| // *File Name: omsp_clock_gate.v | |
| // | |
| // *Module Description: | |
| // Generic clock gate cell for the openMSP430 | |
| // | |
| // *Author(s): | |
| // - Olivier Girard, olgirard@gmail.com | |
| // | |
| //---------------------------------------------------------------------------- | |
| // $Rev: 103 $ | |
| // $LastChangedBy: olivier.girard $ | |
| // $LastChangedDate: 2011-03-05 15:44:48 +0100 (Sat, 05 Mar 2011) $ | |
| //---------------------------------------------------------------------------- | |
| module omsp_clock_gate ( | |
| // OUTPUTs | |
| gclk, // Gated clock | |
| // INPUTs | |
| clk, // Clock | |
| enable, // Clock enable | |
| scan_enable // Scan enable (active during scan shifting) | |
| ); | |
| // OUTPUTs | |
| //========= | |
| output gclk; // Gated clock | |
| // INPUTs | |
| //========= | |
| input clk; // Clock | |
| input enable; // Clock enable | |
| input scan_enable; // Scan enable (active during scan shifting) | |
| //============================================================================= | |
| // CLOCK GATE: LATCH + AND | |
| //============================================================================= | |
| // Enable clock gate during scan shift | |
| // (the gate itself is checked with the scan capture cycle) | |
| wire enable_in = (enable | scan_enable); | |
| // LATCH the enable signal | |
| reg enable_latch; | |
| always @(clk or enable_in) | |
| if (~clk) | |
| enable_latch <= enable_in; | |
| // AND gate | |
| assign gclk = (clk & enable_latch); | |
| endmodule // omsp_clock_gate | |