SVIncCompil/Testcases/Custom_FIR_DMA/cpu_mult_cell.v

//Legal Notice: (C)2010 Altera Corporation. All rights reserved.  Your
//use of Altera Corporation's design tools, logic functions and other
//software and tools, and its AMPP partner logic functions, and any
//output files any of the foregoing (including device programming or
//simulation files), and any associated documentation or information are
//expressly subject to the terms and conditions of the Altera Program
//License Subscription Agreement or other applicable license agreement,
//including, without limitation, that your use is for the sole purpose
//of programming logic devices manufactured by Altera and sold by Altera
//or its authorized distributors.  Please refer to the applicable
//agreement for further details.


// turn off superfluous verilog processor warnings 
// altera message_level Level1 
// altera message_off 10034 10035 10036 10037 10230 10240 10030 

module cpu_mult_cell (
                       // inputs:
                        A_en,
                        E_ctrl_mul_shift_src1_signed,
                        E_ctrl_mul_shift_src2_signed,
                        E_src1_mul_cell,
                        E_src2_mul_cell,
                        M_en,
                        clk,
                        reset_n,

                       // outputs:
                        A_mul_cell_result
                     )
;

  output  [ 63: 0] A_mul_cell_result;
  input            A_en;
  input            E_ctrl_mul_shift_src1_signed;
  input            E_ctrl_mul_shift_src2_signed;
  input   [ 31: 0] E_src1_mul_cell;
  input   [ 31: 0] E_src2_mul_cell;
  input            M_en;
  input            clk;
  input            reset_n;

  wire    [ 63: 0] A_mul_cell_result;
  wire             mul_clr;
  assign mul_clr = ~reset_n;
  altmult_add the_altmult_add
    (
      .aclr0 (mul_clr),
      .aclr1 (mul_clr),
      .clock0 (clk),
      .clock1 (clk),
      .dataa (E_src1_mul_cell),
      .datab (E_src2_mul_cell),
      .ena0 (M_en),
      .ena1 (A_en),
      .result (A_mul_cell_result),
      .signa (E_ctrl_mul_shift_src1_signed),
      .signb (E_ctrl_mul_shift_src2_signed)
    );

  defparam the_altmult_add.addnsub_multiplier_aclr1 = "UNUSED",
           the_altmult_add.addnsub_multiplier_pipeline_aclr1 = "UNUSED",
           the_altmult_add.addnsub_multiplier_register1 = "CLOCK0",
           the_altmult_add.dedicated_multiplier_circuitry = "YES",
           the_altmult_add.input_aclr_a0 = "ACLR0",
           the_altmult_add.input_aclr_b0 = "ACLR0",
           the_altmult_add.input_register_a0 = "CLOCK0",
           the_altmult_add.input_register_b0 = "CLOCK0",
           the_altmult_add.input_source_a0 = "DATAA",
           the_altmult_add.input_source_b0 = "DATAB",
           the_altmult_add.intended_device_family = "STRATIXII",
           the_altmult_add.lpm_type = "altmult_add",
           the_altmult_add.multiplier1_direction = "ADD",
           the_altmult_add.multiplier_register0 = "UNREGISTERED",
           the_altmult_add.number_of_multipliers = 1,
           the_altmult_add.output_aclr = "ACLR1",
           the_altmult_add.output_register = "CLOCK1",
           the_altmult_add.signed_aclr_a = "ACLR0",
           the_altmult_add.signed_aclr_b = "ACLR0",
           the_altmult_add.signed_pipeline_register_a = "UNREGISTERED",
           the_altmult_add.signed_pipeline_register_b = "UNREGISTERED",
           the_altmult_add.signed_register_a = "CLOCK0",
           the_altmult_add.signed_register_b = "CLOCK0",
           the_altmult_add.width_a = 32,
           the_altmult_add.width_b = 32,
           the_altmult_add.width_result = 64;


endmodule