| // Copyright (c) 2000 Stephen Williams (steve@icarus.com) | |
| // | |
| // This source code is free software; you can redistribute it | |
| // and/or modify it in source code form under the terms of the GNU | |
| // General Public License as published by the Free Software | |
| // Foundation; either version 2 of the License, or (at your option) | |
| // any later version. | |
| // | |
| // This program is distributed in the hope that it will be useful, | |
| // but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| // GNU General Public License for more details. | |
| // | |
| // You should have received a copy of the GNU General Public License | |
| // along with this program; if not, write to the Free Software | |
| // Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA | |
| // | |
| /* | |
| * This module implements what essentially amounts to an array of DFF | |
| * devices with output enable. This test checks the operation of the | |
| * bufif0 and bufif1 devices. | |
| */ | |
| module grayGap (ad, clk, read, write); | |
| output [31:0] ad; | |
| input clk, read, write; | |
| reg [15:0] regff; | |
| bufif0 ad_drv [31:0] (ad, {16'b0, regff}, read); | |
| always @(posedge clk) | |
| if (write) regff = ad[15:0]; | |
| endmodule | |
| module main; | |
| wire [31:0] ad; | |
| reg clk, read, write; | |
| reg [31:0] ad_val; | |
| reg ad_en; | |
| bufif1 ad_drv[31:0] (ad, ad_val, ad_en); | |
| grayGap test (ad, clk, read, write); | |
| always #10 clk = ~clk; | |
| initial begin | |
| clk = 1; | |
| read = 1; | |
| write = 0; | |
| $monitor($time, "ad=%b", ad); | |
| // Set up to write a value into the grayGap register. | |
| @(negedge clk) | |
| ad_val = 32'haaaa_aaaa; | |
| read = 1; | |
| write = 1; | |
| ad_en = 1; | |
| // The posedge has passed, now set up to read that value | |
| // out. Turn all the drivers off for a moment, to see that the | |
| // line becomes tri-state... | |
| @(negedge clk) | |
| ad_en = 0; | |
| write = 0; | |
| // Now read the value. | |
| #1 read = 0; | |
| #1 $display("Wrote %h, got %h", ad_val, ad); | |
| if (ad !== 32'b0000_0000_0000_0000_1010_1010_1010_1010) begin | |
| $display("FAILED -- ad is %b", ad); | |
| $finish; | |
| end | |
| #2 read = 1; | |
| $display("PASSED"); | |
| $finish; | |
| end | |
| endmodule // main | |