| // ================================================================== | |
| // >>>>>>>>>>>>>>>>>>>>>>> COPYRIGHT NOTICE <<<<<<<<<<<<<<<<<<<<<<<<< | |
| // ------------------------------------------------------------------ | |
| // Copyright (c) 2006-2011 by Lattice Semiconductor Corporation | |
| // ALL RIGHTS RESERVED | |
| // ------------------------------------------------------------------ | |
| // | |
| // IMPORTANT: THIS FILE IS AUTO-GENERATED BY THE LATTICEMICO SYSTEM. | |
| // | |
| // Permission: | |
| // | |
| // Lattice Semiconductor grants permission to use this code | |
| // pursuant to the terms of the Lattice Semiconductor Corporation | |
| // Open Source License Agreement. | |
| // | |
| // Disclaimer: | |
| // | |
| // Lattice Semiconductor provides no warranty regarding the use or | |
| // functionality of this code. It is the user's responsibility to | |
| // verify the user's design for consistency and functionality through | |
| // the use of formal verification methods. | |
| // | |
| // -------------------------------------------------------------------- | |
| // | |
| // Lattice Semiconductor Corporation | |
| // 5555 NE Moore Court | |
| // Hillsboro, OR 97214 | |
| // U.S.A | |
| // | |
| // TEL: 1-800-Lattice (USA and Canada) | |
| // 503-286-8001 (other locations) | |
| // | |
| // web: http://www.latticesemi.com/ | |
| // email: techsupport@latticesemi.com | |
| // | |
| // -------------------------------------------------------------------- | |
| // FILE DETAILS | |
| // Project : LatticeMico32 | |
| // File : lm32_ram.v | |
| // Title : Pseudo dual-port RAM. | |
| // Version : 6.1.17 | |
| // : Initial Release | |
| // Version : 7.0SP2, 3.0 | |
| // : No Change | |
| // Version : 3.1 | |
| // : Options added to select EBRs (True-DP, Psuedo-DP, DQ, or | |
| // : Distributed RAM). | |
| // Version : 3.2 | |
| // : EBRs use SYNC resets instead of ASYNC resets. | |
| // Version : 3.5 | |
| // : Added read-after-write hazard resolution when using true | |
| // : dual-port EBRs | |
| // ============================================================================= | |
| `include "lm32_include.v" | |
| ///////////////////////////////////////////////////// | |
| // Module interface | |
| ///////////////////////////////////////////////////// | |
| module lm32_ram ( | |
| // ----- Inputs ------- | |
| read_clk, | |
| write_clk, | |
| reset, | |
| enable_read, | |
| read_address, | |
| enable_write, | |
| write_address, | |
| write_data, | |
| write_enable, | |
| // ----- Outputs ------- | |
| read_data | |
| ); | |
| /*---------------------------------------------------------------------- | |
| Parameters | |
| ----------------------------------------------------------------------*/ | |
| parameter data_width = 1; // Width of the data ports | |
| parameter address_width = 1; // Width of the address ports | |
| parameter init_file = "NONE"; // Initialization file | |
| /*---------------------------------------------------------------------- | |
| Inputs | |
| ----------------------------------------------------------------------*/ | |
| input read_clk; // Read clock | |
| input write_clk; // Write clock | |
| input reset; // Reset | |
| input enable_read; // Access enable | |
| input [address_width-1:0] read_address; // Read/write address | |
| input enable_write; // Access enable | |
| input [address_width-1:0] write_address;// Read/write address | |
| input [data_width-1:0] write_data; // Data to write to specified address | |
| input write_enable; // Write enable | |
| /*---------------------------------------------------------------------- | |
| Outputs | |
| ----------------------------------------------------------------------*/ | |
| output [data_width-1:0] read_data; // Data read from specified addess | |
| wire [data_width-1:0] read_data; | |
| /*---------------------------------------------------------------------- | |
| Internal nets and registers | |
| ----------------------------------------------------------------------*/ | |
| reg [data_width-1:0] mem[0:(1<<address_width)-1]; // The RAM | |
| reg [address_width-1:0] ra; // Registered read address | |
| /*---------------------------------------------------------------------- | |
| Combinational Logic | |
| ----------------------------------------------------------------------*/ | |
| // Read port | |
| assign read_data = mem[ra]; | |
| /*---------------------------------------------------------------------- | |
| Sequential Logic | |
| ----------------------------------------------------------------------*/ | |
| // Write port | |
| always @(posedge write_clk) | |
| if ((write_enable == `TRUE) && (enable_write == `TRUE)) | |
| mem[write_address] <= write_data; | |
| // Register read address for use on next cycle | |
| always @(posedge read_clk) | |
| if (enable_read) | |
| ra <= read_address; | |
| /*---------------------------------------------------------------------- | |
| Initialization | |
| ----------------------------------------------------------------------*/ | |
| generate | |
| if (init_file != "NONE") | |
| begin | |
| initial $readmemh(init_file, mem); | |
| end | |
| endgenerate | |
| endmodule |