| // ================================================================== | |
| // >>>>>>>>>>>>>>>>>>>>>>> COPYRIGHT NOTICE <<<<<<<<<<<<<<<<<<<<<<<<< | |
| // ------------------------------------------------------------------ | |
| // Copyright (c) 2006-2011 by Lattice Semiconductor Corporation | |
| // ALL RIGHTS RESERVED | |
| // ------------------------------------------------------------------ | |
| // | |
| // IMPORTANT: THIS FILE IS AUTO-GENERATED BY THE LATTICEMICO SYSTEM. | |
| // | |
| // Permission: | |
| // | |
| // Lattice Semiconductor grants permission to use this code | |
| // pursuant to the terms of the Lattice Semiconductor Corporation | |
| // Open Source License Agreement. | |
| // | |
| // Disclaimer: | |
| // | |
| // Lattice Semiconductor provides no warranty regarding the use or | |
| // functionality of this code. It is the user's responsibility to | |
| // verify the user's design for consistency and functionality through | |
| // the use of formal verification methods. | |
| // | |
| // -------------------------------------------------------------------- | |
| // | |
| // Lattice Semiconductor Corporation | |
| // 5555 NE Moore Court | |
| // Hillsboro, OR 97214 | |
| // U.S.A | |
| // | |
| // TEL: 1-800-Lattice (USA and Canada) | |
| // 503-286-8001 (other locations) | |
| // | |
| // web: http://www.latticesemi.com/ | |
| // email: techsupport@latticesemi.com | |
| // | |
| // -------------------------------------------------------------------- | |
| // FILE DETAILS | |
| // Project : LatticeMico32 | |
| // File : lm32_shifter.v | |
| // Title : Barrel shifter | |
| // Dependencies : lm32_include.v | |
| // Version : 6.1.17 | |
| // : Initial Release | |
| // Version : 7.0SP2, 3.0 | |
| // : No Change | |
| // Version : 3.1 | |
| // : No Change | |
| // ============================================================================= | |
| `include "lm32_include.v" | |
| ///////////////////////////////////////////////////// | |
| // Module interface | |
| ///////////////////////////////////////////////////// | |
| module lm32_shifter ( | |
| // ----- Inputs ------- | |
| clk_i, | |
| rst_i, | |
| stall_x, | |
| direction_x, | |
| sign_extend_x, | |
| operand_0_x, | |
| operand_1_x, | |
| // ----- Outputs ------- | |
| shifter_result_m | |
| ); | |
| ///////////////////////////////////////////////////// | |
| // Inputs | |
| ///////////////////////////////////////////////////// | |
| input clk_i; // Clock | |
| input rst_i; // Reset | |
| input stall_x; // Stall instruction in X stage | |
| input direction_x; // Direction to shift | |
| input sign_extend_x; // Whether shift is arithmetic (1'b1) or logical (1'b0) | |
| input [`LM32_WORD_RNG] operand_0_x; // Operand to shift | |
| input [`LM32_WORD_RNG] operand_1_x; // Operand that specifies how many bits to shift by | |
| ///////////////////////////////////////////////////// | |
| // Outputs | |
| ///////////////////////////////////////////////////// | |
| output [`LM32_WORD_RNG] shifter_result_m; // Result of shift | |
| wire [`LM32_WORD_RNG] shifter_result_m; | |
| ///////////////////////////////////////////////////// | |
| // Internal nets and registers | |
| ///////////////////////////////////////////////////// | |
| reg direction_m; | |
| reg [`LM32_WORD_RNG] left_shift_result; | |
| reg [`LM32_WORD_RNG] right_shift_result; | |
| reg [`LM32_WORD_RNG] left_shift_operand; | |
| wire [`LM32_WORD_RNG] right_shift_operand; | |
| wire fill_value; | |
| wire [`LM32_WORD_RNG] right_shift_in; | |
| integer shift_idx_0; | |
| integer shift_idx_1; | |
| ///////////////////////////////////////////////////// | |
| // Combinational Logic | |
| ///////////////////////////////////////////////////// | |
| // Select operands - To perform a left shift, we reverse the bits and perform a right shift | |
| always @(*) | |
| begin | |
| for (shift_idx_0 = 0; shift_idx_0 < `LM32_WORD_WIDTH; shift_idx_0 = shift_idx_0 + 1) | |
| left_shift_operand[`LM32_WORD_WIDTH-1-shift_idx_0] = operand_0_x[shift_idx_0]; | |
| end | |
| assign right_shift_operand = direction_x == `LM32_SHIFT_OP_LEFT ? left_shift_operand : operand_0_x; | |
| // Determine fill value for right shift - Sign bit for arithmetic shift, or zero for logical shift | |
| assign fill_value = (sign_extend_x == `TRUE) && (direction_x == `LM32_SHIFT_OP_RIGHT) | |
| ? operand_0_x[`LM32_WORD_WIDTH-1] | |
| : 1'b0; | |
| // Determine bits to shift in for right shift or rotate | |
| assign right_shift_in = {`LM32_WORD_WIDTH{fill_value}}; | |
| // Reverse bits to get left shift result | |
| always @(*) | |
| begin | |
| for (shift_idx_1 = 0; shift_idx_1 < `LM32_WORD_WIDTH; shift_idx_1 = shift_idx_1 + 1) | |
| left_shift_result[`LM32_WORD_WIDTH-1-shift_idx_1] = right_shift_result[shift_idx_1]; | |
| end | |
| // Select result | |
| assign shifter_result_m = direction_m == `LM32_SHIFT_OP_LEFT ? left_shift_result : right_shift_result; | |
| ///////////////////////////////////////////////////// | |
| // Sequential Logic | |
| ///////////////////////////////////////////////////// | |
| // Perform right shift | |
| always @(posedge clk_i `CFG_RESET_SENSITIVITY) | |
| begin | |
| if (rst_i == `TRUE) | |
| begin | |
| right_shift_result <= {`LM32_WORD_WIDTH{1'b0}}; | |
| direction_m <= `FALSE; | |
| end | |
| else | |
| begin | |
| if (stall_x == `FALSE) | |
| begin | |
| right_shift_result <= {right_shift_in, right_shift_operand} >> operand_1_x[`LM32_SHIFT_RNG]; | |
| direction_m <= direction_x; | |
| end | |
| end | |
| end | |
| endmodule |