| // ================================================================== | |
| // >>>>>>>>>>>>>>>>>>>>>>> COPYRIGHT NOTICE <<<<<<<<<<<<<<<<<<<<<<<<< | |
| // ------------------------------------------------------------------ | |
| // Copyright (c) 2006-2011 by Lattice Semiconductor Corporation | |
| // ALL RIGHTS RESERVED | |
| // ------------------------------------------------------------------ | |
| // | |
| // IMPORTANT: THIS FILE IS AUTO-GENERATED BY THE LATTICEMICO SYSTEM. | |
| // | |
| // Permission: | |
| // | |
| // Lattice Semiconductor grants permission to use this code | |
| // pursuant to the terms of the Lattice Semiconductor Corporation | |
| // Open Source License Agreement. | |
| // | |
| // Disclaimer: | |
| // | |
| // Lattice Semiconductor provides no warranty regarding the use or | |
| // functionality of this code. It is the user's responsibility to | |
| // verify the user's design for consistency and functionality through | |
| // the use of formal verification methods. | |
| // | |
| // -------------------------------------------------------------------- | |
| // | |
| // Lattice Semiconductor Corporation | |
| // 5555 NE Moore Court | |
| // Hillsboro, OR 97214 | |
| // U.S.A | |
| // | |
| // TEL: 1-800-Lattice (USA and Canada) | |
| // 503-286-8001 (other locations) | |
| // | |
| // web: http://www.latticesemi.com/ | |
| // email: techsupport@latticesemi.com | |
| // | |
| // -------------------------------------------------------------------- | |
| // FILE DETAILS | |
| // Project : LatticeMico32 | |
| // File : lm32_top.v | |
| // Title : Top-level of CPU. | |
| // Dependencies : lm32_include.v | |
| // Version : 6.1.17 | |
| // : removed SPI - 04/12/07 | |
| // Version : 7.0SP2, 3.0 | |
| // : No Change | |
| // Version : 3.1 | |
| // : No Change | |
| // ============================================================================= | |
| `include "lm32_include.v" | |
| ///////////////////////////////////////////////////// | |
| // Module interface | |
| ///////////////////////////////////////////////////// | |
| module lm32_top ( | |
| // ----- Inputs ------- | |
| clk_i, | |
| rst_i, | |
| `ifdef CFG_DEBUG_ENABLED | |
| `ifdef CFG_ALTERNATE_EBA | |
| at_debug, | |
| `endif | |
| `endif | |
| // From external devices | |
| `ifdef CFG_INTERRUPTS_ENABLED | |
| interrupt, | |
| `endif | |
| // From user logic | |
| `ifdef CFG_USER_ENABLED | |
| user_result, | |
| user_complete, | |
| `endif | |
| `ifdef CFG_IWB_ENABLED | |
| // Instruction Wishbone master | |
| I_DAT_I, | |
| I_ACK_I, | |
| I_ERR_I, | |
| I_RTY_I, | |
| `endif | |
| `ifdef CFG_EXTERNAL_BREAK_ENABLED | |
| ext_break, | |
| `endif | |
| // Data Wishbone master | |
| D_DAT_I, | |
| D_ACK_I, | |
| D_ERR_I, | |
| D_RTY_I, | |
| // ----- Outputs ------- | |
| `ifdef CFG_USER_ENABLED | |
| user_valid, | |
| user_opcode, | |
| user_operand_0, | |
| user_operand_1, | |
| `endif | |
| `ifdef CFG_IWB_ENABLED | |
| // Instruction Wishbone master | |
| I_DAT_O, | |
| I_ADR_O, | |
| I_CYC_O, | |
| I_SEL_O, | |
| I_STB_O, | |
| I_WE_O, | |
| I_CTI_O, | |
| I_LOCK_O, | |
| I_BTE_O, | |
| `endif | |
| // Data Wishbone master | |
| D_DAT_O, | |
| D_ADR_O, | |
| D_CYC_O, | |
| D_SEL_O, | |
| D_STB_O, | |
| D_WE_O, | |
| D_CTI_O, | |
| D_LOCK_O, | |
| D_BTE_O | |
| ); | |
| ///////////////////////////////////////////////////// | |
| // Inputs | |
| ///////////////////////////////////////////////////// | |
| input clk_i; // Clock | |
| input rst_i; // Reset | |
| `ifdef CFG_DEBUG_ENABLED | |
| `ifdef CFG_ALTERNATE_EBA | |
| input at_debug; // GPIO input that maps EBA to DEBA | |
| `endif | |
| `endif | |
| `ifdef CFG_INTERRUPTS_ENABLED | |
| input [`LM32_INTERRUPT_RNG] interrupt; // Interrupt pins | |
| `endif | |
| `ifdef CFG_USER_ENABLED | |
| input [`LM32_WORD_RNG] user_result; // User-defined instruction result | |
| input user_complete; // Indicates the user-defined instruction result is valid | |
| `endif | |
| `ifdef CFG_IWB_ENABLED | |
| input [`LM32_WORD_RNG] I_DAT_I; // Instruction Wishbone interface read data | |
| input I_ACK_I; // Instruction Wishbone interface acknowledgement | |
| input I_ERR_I; // Instruction Wishbone interface error | |
| input I_RTY_I; // Instruction Wishbone interface retry | |
| `endif | |
| input [`LM32_WORD_RNG] D_DAT_I; // Data Wishbone interface read data | |
| input D_ACK_I; // Data Wishbone interface acknowledgement | |
| input D_ERR_I; // Data Wishbone interface error | |
| input D_RTY_I; // Data Wishbone interface retry | |
| `ifdef CFG_EXTERNAL_BREAK_ENABLED | |
| input ext_break; | |
| `endif | |
| ///////////////////////////////////////////////////// | |
| // Outputs | |
| ///////////////////////////////////////////////////// | |
| `ifdef CFG_USER_ENABLED | |
| output user_valid; // Indicates that user_opcode and user_operand_* are valid | |
| wire user_valid; | |
| output [`LM32_USER_OPCODE_RNG] user_opcode; // User-defined instruction opcode | |
| reg [`LM32_USER_OPCODE_RNG] user_opcode; | |
| output [`LM32_WORD_RNG] user_operand_0; // First operand for user-defined instruction | |
| wire [`LM32_WORD_RNG] user_operand_0; | |
| output [`LM32_WORD_RNG] user_operand_1; // Second operand for user-defined instruction | |
| wire [`LM32_WORD_RNG] user_operand_1; | |
| `endif | |
| `ifdef CFG_IWB_ENABLED | |
| output [`LM32_WORD_RNG] I_DAT_O; // Instruction Wishbone interface write data | |
| wire [`LM32_WORD_RNG] I_DAT_O; | |
| output [`LM32_WORD_RNG] I_ADR_O; // Instruction Wishbone interface address | |
| wire [`LM32_WORD_RNG] I_ADR_O; | |
| output I_CYC_O; // Instruction Wishbone interface cycle | |
| wire I_CYC_O; | |
| output [`LM32_BYTE_SELECT_RNG] I_SEL_O; // Instruction Wishbone interface byte select | |
| wire [`LM32_BYTE_SELECT_RNG] I_SEL_O; | |
| output I_STB_O; // Instruction Wishbone interface strobe | |
| wire I_STB_O; | |
| output I_WE_O; // Instruction Wishbone interface write enable | |
| wire I_WE_O; | |
| output [`LM32_CTYPE_RNG] I_CTI_O; // Instruction Wishbone interface cycle type | |
| wire [`LM32_CTYPE_RNG] I_CTI_O; | |
| output I_LOCK_O; // Instruction Wishbone interface lock bus | |
| wire I_LOCK_O; | |
| output [`LM32_BTYPE_RNG] I_BTE_O; // Instruction Wishbone interface burst type | |
| wire [`LM32_BTYPE_RNG] I_BTE_O; | |
| `endif | |
| output [`LM32_WORD_RNG] D_DAT_O; // Data Wishbone interface write data | |
| wire [`LM32_WORD_RNG] D_DAT_O; | |
| output [`LM32_WORD_RNG] D_ADR_O; // Data Wishbone interface address | |
| wire [`LM32_WORD_RNG] D_ADR_O; | |
| output D_CYC_O; // Data Wishbone interface cycle | |
| wire D_CYC_O; | |
| output [`LM32_BYTE_SELECT_RNG] D_SEL_O; // Data Wishbone interface byte select | |
| wire [`LM32_BYTE_SELECT_RNG] D_SEL_O; | |
| output D_STB_O; // Data Wishbone interface strobe | |
| wire D_STB_O; | |
| output D_WE_O; // Data Wishbone interface write enable | |
| wire D_WE_O; | |
| output [`LM32_CTYPE_RNG] D_CTI_O; // Data Wishbone interface cycle type | |
| wire [`LM32_CTYPE_RNG] D_CTI_O; | |
| output D_LOCK_O; // Date Wishbone interface lock bus | |
| wire D_LOCK_O; | |
| output [`LM32_BTYPE_RNG] D_BTE_O; // Data Wishbone interface burst type | |
| wire [`LM32_BTYPE_RNG] D_BTE_O; | |
| ///////////////////////////////////////////////////// | |
| // Internal nets and registers | |
| ///////////////////////////////////////////////////// | |
| `ifdef CFG_JTAG_ENABLED | |
| // Signals between JTAG interface and CPU | |
| wire [`LM32_BYTE_RNG] jtag_reg_d; | |
| wire [`LM32_BYTE_RNG] jtag_reg_q; | |
| wire jtag_update; | |
| wire [2:0] jtag_reg_addr_d; | |
| wire [2:0] jtag_reg_addr_q; | |
| wire jtck; | |
| wire jrstn; | |
| `endif | |
| // TODO: get the trace signals out | |
| `ifdef CFG_TRACE_ENABLED | |
| // PC trace signals | |
| wire [`LM32_PC_RNG] trace_pc; // PC to trace (address of next non-sequential instruction) | |
| wire trace_pc_valid; // Indicates that a new trace PC is valid | |
| wire trace_exception; // Indicates an exception has occured | |
| wire [`LM32_EID_RNG] trace_eid; // Indicates what type of exception has occured | |
| wire trace_eret; // Indicates an eret instruction has been executed | |
| `ifdef CFG_DEBUG_ENABLED | |
| wire trace_bret; // Indicates a bret instruction has been executed | |
| `endif | |
| `endif | |
| ///////////////////////////////////////////////////// | |
| // Functions | |
| ///////////////////////////////////////////////////// | |
| ///////////////////////////////////////////////////// | |
| // Instantiations | |
| ///////////////////////////////////////////////////// | |
| // LM32 CPU | |
| lm32_cpu cpu ( | |
| // ----- Inputs ------- | |
| .clk_i (clk_i), | |
| `ifdef CFG_EBR_NEGEDGE_REGISTER_FILE | |
| .clk_n_i (clk_n), | |
| `endif | |
| .rst_i (rst_i), | |
| `ifdef CFG_DEBUG_ENABLED | |
| `ifdef CFG_ALTERNATE_EBA | |
| .at_debug (at_debug), | |
| `endif | |
| `endif | |
| // From external devices | |
| `ifdef CFG_INTERRUPTS_ENABLED | |
| .interrupt (interrupt), | |
| `endif | |
| // From user logic | |
| `ifdef CFG_USER_ENABLED | |
| .user_result (user_result), | |
| .user_complete (user_complete), | |
| `endif | |
| `ifdef CFG_JTAG_ENABLED | |
| // From JTAG | |
| .jtag_clk (jtck), | |
| .jtag_update (jtag_update), | |
| .jtag_reg_q (jtag_reg_q), | |
| .jtag_reg_addr_q (jtag_reg_addr_q), | |
| `endif | |
| `ifdef CFG_EXTERNAL_BREAK_ENABLED | |
| .ext_break (ext_break), | |
| `endif | |
| `ifdef CFG_IWB_ENABLED | |
| // Instruction Wishbone master | |
| .I_DAT_I (I_DAT_I), | |
| .I_ACK_I (I_ACK_I), | |
| .I_ERR_I (I_ERR_I), | |
| .I_RTY_I (I_RTY_I), | |
| `endif | |
| // Data Wishbone master | |
| .D_DAT_I (D_DAT_I), | |
| .D_ACK_I (D_ACK_I), | |
| .D_ERR_I (D_ERR_I), | |
| .D_RTY_I (D_RTY_I), | |
| // ----- Outputs ------- | |
| `ifdef CFG_TRACE_ENABLED | |
| .trace_pc (trace_pc), | |
| .trace_pc_valid (trace_pc_valid), | |
| .trace_exception (trace_exception), | |
| .trace_eid (trace_eid), | |
| .trace_eret (trace_eret), | |
| `ifdef CFG_DEBUG_ENABLED | |
| .trace_bret (trace_bret), | |
| `endif | |
| `endif | |
| `ifdef CFG_JTAG_ENABLED | |
| .jtag_reg_d (jtag_reg_d), | |
| .jtag_reg_addr_d (jtag_reg_addr_d), | |
| `endif | |
| `ifdef CFG_USER_ENABLED | |
| .user_valid (user_valid), | |
| .user_opcode (user_opcode), | |
| .user_operand_0 (user_operand_0), | |
| .user_operand_1 (user_operand_1), | |
| `endif | |
| `ifdef CFG_IWB_ENABLED | |
| // Instruction Wishbone master | |
| .I_DAT_O (I_DAT_O), | |
| .I_ADR_O (I_ADR_O), | |
| .I_CYC_O (I_CYC_O), | |
| .I_SEL_O (I_SEL_O), | |
| .I_STB_O (I_STB_O), | |
| .I_WE_O (I_WE_O), | |
| .I_CTI_O (I_CTI_O), | |
| .I_LOCK_O (I_LOCK_O), | |
| .I_BTE_O (I_BTE_O), | |
| `endif | |
| // Data Wishbone master | |
| .D_DAT_O (D_DAT_O), | |
| .D_ADR_O (D_ADR_O), | |
| .D_CYC_O (D_CYC_O), | |
| .D_SEL_O (D_SEL_O), | |
| .D_STB_O (D_STB_O), | |
| .D_WE_O (D_WE_O), | |
| .D_CTI_O (D_CTI_O), | |
| .D_LOCK_O (D_LOCK_O), | |
| .D_BTE_O (D_BTE_O) | |
| ); | |
| `ifdef CFG_JTAG_ENABLED | |
| // JTAG cores | |
| jtag_cores jtag_cores ( | |
| // ----- Inputs ----- | |
| .reg_d (jtag_reg_d), | |
| .reg_addr_d (jtag_reg_addr_d), | |
| // ----- Outputs ----- | |
| .reg_update (jtag_update), | |
| .reg_q (jtag_reg_q), | |
| .reg_addr_q (jtag_reg_addr_q), | |
| .jtck (jtck), | |
| .jrstn (jrstn) | |
| ); | |
| `endif | |
| endmodule |