| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2013 by Ed Lander. | |
| // verilator lint_off WIDTH | |
| `define checkh(gotv,expv) do if ((gotv) !== (expv)) begin $write("%%Error: %s:%0d: got='h%x exp='h%x\n", `__FILE__,`__LINE__, (gotv), (expv)); $stop; end while(0); | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| clk | |
| ); | |
| input clk; | |
| reg [7:0] p1; | |
| reg [7:0] p2; | |
| reg [7:0] p3; | |
| initial begin | |
| p1 = 8'h01; | |
| p2 = 8'h02; | |
| p3 = 8'h03; | |
| end | |
| parameter int param1 = 8'h11; | |
| parameter int param2 = 8'h12; | |
| parameter int param3 = 8'h13; | |
| targetmod i_targetmod (/*AUTOINST*/ | |
| // Inputs | |
| .clk (clk)); | |
| //Binding i_targetmod to mycheck --instantiates i_mycheck inside i_targetmod | |
| //param1 not over-riden (as mycheck) (=> 0x31) | |
| //param2 explicitly bound to targetmod value (=> 0x22) | |
| //param3 explicitly bound to top value (=> 0x13) | |
| //p1 implictly bound (.*), takes value from targetmod (=> 0x04) | |
| //p2 explictly bound to targetmod (=> 0x05) | |
| //p3 explictly bound to top (=> 0x03) | |
| // Alternative unsupported form is i_targetmod | |
| bind targetmod mycheck | |
| #( | |
| .param2(param2), | |
| .param3(param3) | |
| ) | |
| i_mycheck (.p2(p2), .p3(p3), .*); | |
| endmodule | |
| module targetmod (input clk); | |
| reg [7:0] p1; | |
| reg [7:0] p2; | |
| reg [7:0] p3; | |
| parameter int param1 = 8'h21; | |
| parameter int param2 = 8'h22; | |
| parameter int param3 = 8'h23; | |
| initial begin | |
| p1 = 8'h04; | |
| p2 = 8'h05; | |
| p3 = 8'h06; | |
| end | |
| endmodule | |
| module mycheck (/*AUTOARG*/ | |
| // Inputs | |
| clk, p1, p2, p3 | |
| ); | |
| input clk; | |
| input [7:0] p1; | |
| input [7:0] p2; | |
| input [7:0] p3; | |
| parameter int param1 = 8'h31; | |
| parameter int param2 = 8'h32; | |
| parameter int param3 = 8'h33; | |
| always @ (posedge clk) begin | |
| `checkh(param1,8'h31); | |
| `checkh(param2,8'h22); | |
| `checkh(param3,8'h23); | |
| `checkh(p1,8'h04); | |
| `checkh(p2,8'h05); | |
| `checkh(p3,8'h06); | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| endmodule |