| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2011 by Wilson Snyder. | |
| module t_embed1_wrap (/*AUTOARG*/ | |
| // Outputs | |
| bit_out, vec_out, wide_out, did_init_out, | |
| // Inputs | |
| clk, bit_in, vec_in, wide_in, is_ref | |
| ); | |
| /*AUTOINOUTMODULE("t_embed1_child")*/ | |
| // Beginning of automatic in/out/inouts (from specific module) | |
| output bit_out; | |
| output [30:0] vec_out; | |
| output [123:0] wide_out; | |
| output did_init_out; | |
| input clk; | |
| input bit_in; | |
| input [30:0] vec_in; | |
| input [123:0] wide_in; | |
| input is_ref; | |
| // End of automatics | |
| `ifdef verilator | |
| // Import $t_embed_child__initial etc as a DPI function | |
| `endif | |
| //TODO would like __'s as in {PREFIX}__initial but presently illegal for users to do this | |
| import "DPI-C" context function void t_embed_child_initial(); | |
| import "DPI-C" context function void t_embed_child_final(); | |
| import "DPI-C" context function void t_embed_child_eval(); | |
| import "DPI-C" context function void t_embed_child_io_eval | |
| ( | |
| //TODO we support bit, but not logic | |
| input bit clk, | |
| input bit bit_in, | |
| input bit [30:0] vec_in, | |
| input bit [123:0] wide_in, | |
| input bit is_ref, | |
| output bit bit_out, | |
| output bit [30:0] vec_out, | |
| output bit [123:0] wide_out, | |
| output bit did_init_out); | |
| initial begin | |
| // Load all values | |
| t_embed_child_initial(); | |
| end | |
| // Only if system verilog, and if a "final" block in the code | |
| final begin | |
| t_embed_child_final(); | |
| end | |
| bit _temp_bit_out; | |
| bit _temp_did_init_out; | |
| bit [30:0] _temp_vec_out; | |
| bit [123:0] _temp_wide_out; | |
| always @* begin | |
| t_embed_child_io_eval( | |
| clk, | |
| bit_in, | |
| vec_in, | |
| wide_in, | |
| is_ref, | |
| _temp_bit_out, | |
| _temp_vec_out, | |
| _temp_wide_out, | |
| _temp_did_init_out | |
| ); | |
| // TODO might eliminate these temporaries | |
| bit_out = _temp_bit_out; | |
| did_init_out = _temp_did_init_out; | |
| end | |
| // Send all variables every cycle, | |
| // or have a sensitivity routine for each? | |
| // How to make sure we call eval at end of variable changes? | |
| // #0 (though not verilator compatible!) | |
| // TODO for now, we know what changes when | |
| always @ (posedge clk) begin | |
| vec_out <= _temp_vec_out; | |
| wide_out <= _temp_wide_out; | |
| end | |
| endmodule |