| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2010 by Wilson Snyder. | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| clk | |
| ); | |
| input clk; | |
| integer cyc=1; | |
| counter_io c1_data(); | |
| counter_io c2_data(); | |
| //counter_io c3_data; // IEEE illegal, and VCS doesn't allow non-() as it does with cells | |
| counter_io c3_data(); | |
| counter_ansi c1 (.clkm(clk), | |
| .c_data(c1_data), | |
| .i_value(4'h1)); | |
| counter_ansi c2 (.clkm(clk), | |
| .c_data(c2_data), | |
| .i_value(4'h2)); | |
| `ifdef VERILATOR counter_ansi `else counter_nansi `endif | |
| /**/ c3 (.clkm(clk), | |
| .c_data(c3_data), | |
| .i_value(4'h3)); | |
| initial begin | |
| c1_data.value = 4'h4; | |
| c2_data.value = 4'h5; | |
| c3_data.value = 4'h6; | |
| end | |
| always @ (posedge clk) begin | |
| cyc <= cyc + 1; | |
| if (cyc<2) begin | |
| c1_data.reset <= 1; | |
| c2_data.reset <= 1; | |
| c3_data.reset <= 1; | |
| end | |
| if (cyc==2) begin | |
| c1_data.reset <= 0; | |
| c2_data.reset <= 0; | |
| c3_data.reset <= 0; | |
| end | |
| if (cyc==3) begin | |
| if (c1_data.get_lcl() != 12345) $stop; | |
| end | |
| if (cyc==20) begin | |
| $write("[%0t] c1 cyc%0d: c1 %0x %0x c2 %0x %0x c3 %0x %0x\n", $time, cyc, | |
| c1_data.value, c1_data.reset, | |
| c2_data.value, c2_data.reset, | |
| c3_data.value, c3_data.reset); | |
| if (c1_data.value != 2) $stop; | |
| if (c2_data.value != 3) $stop; | |
| if (c3_data.value != 4) $stop; | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| endmodule | |
| interface counter_io; | |
| logic [3:0] value; | |
| logic reset; | |
| integer lcl; | |
| task set_lcl (input integer a); lcl=a; endtask | |
| function integer get_lcl (); return lcl; endfunction | |
| endinterface | |
| interface ifunused; | |
| logic unused; | |
| endinterface | |
| module counter_ansi | |
| ( | |
| input clkm, | |
| counter_io c_data, | |
| input logic [3:0] i_value | |
| ); | |
| initial begin | |
| c_data.set_lcl(12345); | |
| end | |
| always @ (posedge clkm) begin | |
| c_data.value <= c_data.reset ? i_value : c_data.value + 1; | |
| end | |
| endmodule : counter_ansi | |
| `ifndef VERILATOR | |
| // non-ansi modports not seen in the wild yet. Verilog-Perl needs parser improvement too. | |
| module counter_nansi(clkm, c_data, i_value); | |
| input clkm; | |
| counter_io c_data; | |
| input logic [3:0] i_value; | |
| always @ (posedge clkm) begin | |
| c_data.value <= c_data.reset ? i_value : c_data.value + 1; | |
| end | |
| endmodule : counter_nansi | |
| `endif | |
| module modunused (ifunused ifinunused); | |
| ifunused ifunused(); | |
| endmodule |