| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2018 by Alex Solomatnikov. | |
| interface hex2ram_if | |
| ( | |
| input bit trigger | |
| ); | |
| string instance_path = $sformatf("%m"); | |
| string testfile = ""; | |
| bit has_testfile = |($value$plusargs("testfile=%s", testfile)); | |
| bit armed = 1'b1; | |
| bit armed_trigger; | |
| initial begin | |
| $display("successfully bound hex2ram_if to %s", instance_path); | |
| armed = has_testfile && 1'b1; | |
| end | |
| assign armed_trigger = armed && trigger; | |
| always @(posedge armed_trigger) begin | |
| $display("%m(%0t): saw deassertion of reset", $time); | |
| end | |
| endinterface : hex2ram_if | |
| module t | |
| ( | |
| clk | |
| ); | |
| input clk /*verilator clocker*/; | |
| bit reset; | |
| wire success; | |
| SimpleTestHarness testHarness | |
| ( | |
| .clk(clk), | |
| .reset(reset), | |
| .io_success(success) | |
| ); | |
| integer cyc=0; | |
| always @ (posedge clk) begin | |
| cyc = cyc + 1; | |
| if (cyc<10) begin | |
| reset <= '0; | |
| end | |
| else if (cyc<20) begin | |
| reset <= '1; | |
| end | |
| else if (cyc<30) begin | |
| reset <= '0; | |
| end | |
| else if (cyc==99) begin | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| endmodule | |
| bind testharness_ext hex2ram_if i_hex2ram (.trigger(!t.reset)); | |
| module testharness_ext | |
| ( | |
| input W0_clk, | |
| input [24:0] W0_addr, | |
| input W0_en, | |
| input [127:0] W0_data, | |
| input [0:0] W0_mask, | |
| input R0_clk, | |
| input [24:0] R0_addr, | |
| input R0_en, | |
| output [127:0] R0_data | |
| ); | |
| reg [24:0] reg_R0_addr; | |
| wire [127:0] R0_rdata_mask; | |
| reg [127:0] ram [33554431:0]; | |
| wire [127:0] W0_wdata_mask; | |
| always @(posedge R0_clk) | |
| if (R0_en) reg_R0_addr <= R0_addr; | |
| always @(posedge W0_clk) | |
| if (W0_en) begin | |
| if (W0_mask[0]) ram[W0_addr] <= W0_data ^ W0_wdata_mask; | |
| end | |
| assign R0_data = ram[reg_R0_addr] ^ R0_rdata_mask;; | |
| assign R0_rdata_mask = 0; | |
| assign W0_wdata_mask = 0; | |
| endmodule | |
| module SimpleTestHarness | |
| ( | |
| input clk, | |
| input reset, | |
| output io_success); | |
| wire [24:0] testharness_ext_R0_addr; | |
| wire testharness_ext_R0_en; | |
| wire testharness_ext_R0_clk; | |
| wire [127:0] testharness_ext_R0_data; | |
| wire [24:0] testharness_ext_W0_addr; | |
| wire testharness_ext_W0_en; | |
| wire testharness_ext_W0_clk; | |
| wire [127:0] testharness_ext_W0_data; | |
| wire [0:0] testharness_ext_W0_mask; | |
| testharness_ext testharness_ext | |
| ( | |
| .R0_addr(testharness_ext_R0_addr), | |
| .R0_en(testharness_ext_R0_en), | |
| .R0_clk(testharness_ext_R0_clk), | |
| .R0_data(testharness_ext_R0_data), | |
| .W0_addr(testharness_ext_W0_addr), | |
| .W0_en(testharness_ext_W0_en), | |
| .W0_clk(testharness_ext_W0_clk), | |
| .W0_data(testharness_ext_W0_data), | |
| .W0_mask(testharness_ext_W0_mask) | |
| ); | |
| endmodule |