| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2013. | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| clk | |
| ); | |
| input clk; | |
| integer cyc=0; | |
| reg [63:0] crc; | |
| reg [63:0] sum; | |
| // Take CRC data and apply to testblock inputs | |
| wire pick1 = crc[0]; | |
| wire [13:0][1:0] data1 = crc[27+1:1]; | |
| wire [3:0][2:0][1:0] data2 = crc[23+29:29]; | |
| /*AUTOWIRE*/ | |
| // Beginning of automatic wires (for undeclared instantiated-module outputs) | |
| logic [15:0] [1:0] datao; // From test of Test.v | |
| // End of automatics | |
| Test test (/*AUTOINST*/ | |
| // Outputs | |
| .datao (datao/*[15:0][1:0]*/), | |
| // Inputs | |
| .pick1 (pick1), | |
| .data1 (data1/*[13:0][1:0]*/), | |
| .data2 (data2/*[2:0][3:0][1:0]*/)); | |
| // Aggregate outputs into a single result vector | |
| wire [63:0] result = {32'h0, datao}; | |
| // Test loop | |
| always @ (posedge clk) begin | |
| `ifdef TEST_VERBOSE | |
| $write("[%0t] cyc==%0d crc=%x result=%x\n",$time, cyc, crc, result); | |
| `endif | |
| cyc <= cyc + 1; | |
| crc <= {crc[62:0], crc[63]^crc[2]^crc[0]}; | |
| sum <= result ^ {sum[62:0],sum[63]^sum[2]^sum[0]}; | |
| if (cyc==0) begin | |
| // Setup | |
| crc <= 64'h5aef0c8d_d70a4497; | |
| sum <= 64'h0; | |
| end | |
| else if (cyc<10) begin | |
| sum <= 64'h0; | |
| end | |
| else if (cyc<90) begin | |
| end | |
| else if (cyc==99) begin | |
| $write("[%0t] cyc==%0d crc=%x sum=%x\n",$time, cyc, crc, sum); | |
| if (crc !== 64'hc77bb9b3784ea091) $stop; | |
| // What checksum will we end up with (above print should match) | |
| `define EXPECTED_SUM 64'h3ff4bf0e6407b281 | |
| if (sum !== `EXPECTED_SUM) $stop; | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| endmodule | |
| module Test | |
| ( | |
| input logic pick1, | |
| input logic [13:0] [1:0] data1, // 14 x 2 = 28 bits | |
| input logic [ 3:0] [2:0] [1:0] data2, // 4 x 3 x 2 = 24 bits | |
| output logic [15:0] [1:0] datao // 16 x 2 = 32 bits | |
| ); | |
| // verilator lint_off WIDTH | |
| always_comb datao[13: 0] // 28 bits | |
| = (pick1) | |
| ? {data1} // 28 bits | |
| : {'0, data2}; // 25-28 bits, perhaps not legal as '0 is unsized | |
| // verilator lint_on WIDTH | |
| always_comb datao[15:14] = '0; | |
| endmodule |