| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2009 by Wilson Snyder. | |
| module t; | |
| //Several simulators don't support this. | |
| //typedef struct pack2; // Forward declaration | |
| typedef struct packed { // [3:0] | |
| bit b3; | |
| bit b2; | |
| bit b1; | |
| bit b0; | |
| } b4_t; | |
| typedef struct packed { // [3:0] | |
| b4_t x1; | |
| b4_t x0; | |
| } b4x2_t; | |
| typedef union packed { // [3:0] | |
| bit [3:0] quad0; | |
| b4_t quad1; | |
| } q4_t; | |
| typedef struct packed { // [5:0] | |
| bit msb; | |
| q4_t four; | |
| bit lsb; | |
| } pack2_t; | |
| typedef union packed { // [5:0] | |
| pack2_t pack2; | |
| bit [6:1] pvec; | |
| // Vector not allowed in packed structure, per spec: | |
| // bit vec[6]; | |
| // bit vec2d[2][3]; | |
| } pack3_t; | |
| const b4_t b4_const_a = '{1'b1, 1'b0, 1'b0, 1'b1}; | |
| // Cast to a pattern - note bits are tagged out of order | |
| const b4_t b4_const_b = b4_t'{ b1 : 1'b0, b0 : 1'b1, b3 : 1'b1, b2 : 1'b0 }; | |
| wire b4_t b4_wire; | |
| assign b4_wire = '{1'b1, 1'b0, 1'b1, 1'b0}; | |
| pack2_t arr[2]; | |
| //`ifdef T_STRUCT_INIT_BAD | |
| // const b4_t b4_const_c = '{b1: 1'b1, b1: 1'b0, b0:1'b0, b2: 1'b1, b3: 1'b1}; | |
| //`endif | |
| initial begin | |
| pack3_t tsu; | |
| tsu = 6'b110110; | |
| // 543210 | |
| if (tsu!=6'b110110) $stop; | |
| if (tsu[5:4]!=2'b11) $stop; | |
| if (tsu[5:4] == tsu[1:0]) $stop; // Not a good extraction test if LSB subtraction doesn't matter | |
| if (tsu.pvec!=6'b110110) $stop; | |
| if (tsu.pvec[6:5]!=2'b11) $stop; | |
| if (tsu.pack2[5:1] != 5'b11011) $stop; | |
| if (tsu.pack2.msb != 1'b1) $stop; | |
| if (tsu.pack2.lsb != 1'b0) $stop; | |
| if (tsu.pack2.four.quad0 != 4'b1011) $stop; | |
| if (tsu.pack2.four.quad1.b0 != 1'b1) $stop; | |
| if (tsu.pack2.four.quad1.b1 != 1'b1) $stop; | |
| if (tsu.pack2.four.quad1.b2 != 1'b0) $stop; | |
| if (tsu.pack2.four.quad1.b3 != 1'b1) $stop; | |
| // | |
| // tsu = 1'b0 ? '0 : '{pvec: 6'b101011}; | |
| if (tsu!=6'b101011) $stop; | |
| // | |
| arr[0] = 6'b101010; | |
| arr[1] = 6'b010101; | |
| if (arr[0].four !== 4'b0101) $stop; | |
| if (arr[1].four !== 4'b1010) $stop; | |
| // | |
| // Initialization | |
| begin | |
| b4_t q = '{1'b1, 1'b1, 1'b0, 1'b0}; | |
| if (q != 4'b1100) $stop; | |
| end | |
| begin | |
| b4_t q = '{3{1'b1}, 1'b0}; | |
| if (q != 4'b1110) $stop; | |
| end | |
| begin | |
| b4_t q = '{4{1'b1}}; // Repeats the {} | |
| if (q != 4'b1111) $stop; | |
| end | |
| begin | |
| b4x2_t m = '{4'b1001, '{1'b1, 1'b0, 1'b1, 1'b1}}; | |
| if (m != 8'b10011011) $stop; | |
| end | |
| begin | |
| b4_t q = '{default:1'b1}; | |
| if (q != 4'b1111) $stop; | |
| end | |
| begin | |
| b4_t q = '{b0:1'b1, b2:1'b1, b3:1'b1, b1:1'b0}; | |
| if (q != 4'b1101) $stop; | |
| end | |
| begin | |
| b4_t q = '{b2:1'b0, default:1'b1}; | |
| if (q != 4'b1011) $stop; | |
| end | |
| if (b4_const_a != 4'b1001) $stop; | |
| if (b4_const_b != 4'b1001) $stop; | |
| if (b4_wire != 4'b1010) $stop; | |
| if (pat(4'b1100, 4'b1100)) $stop; | |
| if (pat('{1'b1, 1'b0, 1'b1, 1'b1}, 4'b1011)) $stop; | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| function pat(b4_t in, logic [3:0] cmp); | |
| if (in !== cmp) $stop; | |
| pat = 1'b0; | |
| endfunction | |
| endmodule |