| //Legal Notice: (C)2010 Altera Corporation. All rights reserved. Your | |
| //use of Altera Corporation's design tools, logic functions and other | |
| //software and tools, and its AMPP partner logic functions, and any | |
| //output files any of the foregoing (including device programming or | |
| //simulation files), and any associated documentation or information are | |
| //expressly subject to the terms and conditions of the Altera Program | |
| //License Subscription Agreement or other applicable license agreement, | |
| //including, without limitation, that your use is for the sole purpose | |
| //of programming logic devices manufactured by Altera and sold by Altera | |
| //or its authorized distributors. Please refer to the applicable | |
| //agreement for further details. | |
| // turn off superfluous verilog processor warnings | |
| // altera message_level Level1 | |
| // altera message_off 10034 10035 10036 10037 10230 10240 10030 | |
| module cpu_mult_cell ( | |
| // inputs: | |
| A_en, | |
| E_ctrl_mul_shift_src1_signed, | |
| E_ctrl_mul_shift_src2_signed, | |
| E_src1_mul_cell, | |
| E_src2_mul_cell, | |
| M_en, | |
| clk, | |
| reset_n, | |
| // outputs: | |
| A_mul_cell_result | |
| ) | |
| ; | |
| output [ 63: 0] A_mul_cell_result; | |
| input A_en; | |
| input E_ctrl_mul_shift_src1_signed; | |
| input E_ctrl_mul_shift_src2_signed; | |
| input [ 31: 0] E_src1_mul_cell; | |
| input [ 31: 0] E_src2_mul_cell; | |
| input M_en; | |
| input clk; | |
| input reset_n; | |
| wire [ 63: 0] A_mul_cell_result; | |
| wire mul_clr; | |
| assign mul_clr = ~reset_n; | |
| altmult_add the_altmult_add | |
| ( | |
| .aclr0 (mul_clr), | |
| .aclr1 (mul_clr), | |
| .clock0 (clk), | |
| .clock1 (clk), | |
| .dataa (E_src1_mul_cell), | |
| .datab (E_src2_mul_cell), | |
| .ena0 (M_en), | |
| .ena1 (A_en), | |
| .result (A_mul_cell_result), | |
| .signa (E_ctrl_mul_shift_src1_signed), | |
| .signb (E_ctrl_mul_shift_src2_signed) | |
| ); | |
| defparam the_altmult_add.addnsub_multiplier_aclr1 = "UNUSED", | |
| the_altmult_add.addnsub_multiplier_pipeline_aclr1 = "UNUSED", | |
| the_altmult_add.addnsub_multiplier_register1 = "CLOCK0", | |
| the_altmult_add.dedicated_multiplier_circuitry = "YES", | |
| the_altmult_add.input_aclr_a0 = "ACLR0", | |
| the_altmult_add.input_aclr_b0 = "ACLR0", | |
| the_altmult_add.input_register_a0 = "CLOCK0", | |
| the_altmult_add.input_register_b0 = "CLOCK0", | |
| the_altmult_add.input_source_a0 = "DATAA", | |
| the_altmult_add.input_source_b0 = "DATAB", | |
| the_altmult_add.intended_device_family = "STRATIXII", | |
| the_altmult_add.lpm_type = "altmult_add", | |
| the_altmult_add.multiplier1_direction = "ADD", | |
| the_altmult_add.multiplier_register0 = "UNREGISTERED", | |
| the_altmult_add.number_of_multipliers = 1, | |
| the_altmult_add.output_aclr = "ACLR1", | |
| the_altmult_add.output_register = "CLOCK1", | |
| the_altmult_add.signed_aclr_a = "ACLR0", | |
| the_altmult_add.signed_aclr_b = "ACLR0", | |
| the_altmult_add.signed_pipeline_register_a = "UNREGISTERED", | |
| the_altmult_add.signed_pipeline_register_b = "UNREGISTERED", | |
| the_altmult_add.signed_register_a = "CLOCK0", | |
| the_altmult_add.signed_register_b = "CLOCK0", | |
| the_altmult_add.width_a = 32, | |
| the_altmult_add.width_b = 32, | |
| the_altmult_add.width_result = 64; | |
| endmodule | |