| // test_mis.v - Testbench for mis.bvrl | |
| // 01-22-01 E. Brombaugh | |
| /* | |
| * Copyright (c) 2001 Eric Brombaugh <ebrombau@intersil.com> | |
| * | |
| * This source code is free software; you can redistribute it | |
| * and/or modify it in source code form under the terms of the GNU | |
| * General Public License as published by the Free Software | |
| * Foundation; either version 2 of the License, or (at your option) | |
| * any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA | |
| */ | |
| /* | |
| * The mis'' module was generated by the synopsis module compiler | |
| * and is typical of the modules it generates. The testbench was hand | |
| * coded. This file was merged into a single file using the Verilog | |
| * preprocessor. | |
| */ | |
| `timescale 1ns / 10 ps | |
| module mis( y, a, b ); | |
| input [3:0] a; | |
| input [3:0] b; | |
| output [12:0] y; | |
| wire dpa_zero, dpa_one; | |
| wire [5:0] const__1_24_; | |
| wire [7:0] C0; | |
| wire [6:0] const__2_33_; | |
| wire [7:0] C1; | |
| wire [12:0] y_1_; | |
| assign dpa_zero= 1024'h0; | |
| assign dpa_one= 1024'h1; | |
| assign const__1_24_=- 1024'h18; | |
| assign const__2_33_=- 1024'h21; | |
| /* mis.mcl:4 module mis (y, a, b); */ | |
| /* mis.mcl:5 input signed [3:0] a, b; */ | |
| /* mis.mcl:10 C0 = -24; */ | |
| assign C0= ((const__1_24_[4:0]-(const__1_24_[5]<<5))); | |
| /* mis.mcl:11 C1 = -33; */ | |
| assign C1= ((const__2_33_[5:0]-(const__2_33_[6]<<6))); | |
| /* mis.mcl:13 y = C0*a + C1*b; */ | |
| assign y_1_= ((C0[6:0]-(C0[7]<<7))*(a[2:0]-(a[3]<<3))+ | |
| (C1[6:0]-(C1[7]<<7))*(b[2:0]-(b[3]<<3))); | |
| /* mis.mcl:6 output signed [12:0] y; */ | |
| assign y = y_1_[12:0]; | |
| /* mis.mcl:4 module mis (y, a, b); */ | |
| /* mis.mcl:13 y = C0*a + C1*b; */ | |
| /*User Defined Aliases */ | |
| endmodule | |
| module test_mis; | |
| reg [10:0] count; | |
| reg clk; | |
| reg [3:0] a, b; | |
| wire [12:0] y; | |
| mis u1(y, a, b); | |
| initial | |
| begin | |
| count = 0; | |
| clk = 0; | |
| a = 0; | |
| b = 0; | |
| end | |
| always | |
| #10 clk = ~clk; | |
| always @(posedge clk) | |
| begin | |
| a = count[3:0]; | |
| b = count[7:4]; | |
| #10 | |
| $display("%h %h %h", a, b, y); | |
| count = count + 1; | |
| if(count == 0) | |
| $finish; | |
| end | |
| endmodule |