| /* | |
| * Copyright (c) 2003 Stephen Williams (steve@icarus.com) | |
| * | |
| * This source code is free software; you can redistribute it | |
| * and/or modify it in source code form under the terms of the GNU | |
| * General Public License as published by the Free Software | |
| * Foundation; either version 2 of the License, or (at your option) | |
| * any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA | |
| */ | |
| /* | |
| * Test some multiply values for an 18*18-->36 multiply. | |
| */ | |
| module main; | |
| wire [35:0] p; | |
| reg [17:0] a, b; | |
| reg clk, ce, reset; | |
| parameter MAX_TRIALS = 1000; | |
| integer idx; | |
| MULT18X18S dut (p, a, b, clk, ce, reset); | |
| initial begin | |
| clk <= 0; | |
| ce <= 1; | |
| reset <= 1; | |
| a <= 0; | |
| b <= 0; | |
| #5 clk <= 1; | |
| #5 clk <= 0; | |
| if (p !== 36'h0) begin | |
| $display("FAILED -- reset p=%h", p); | |
| $finish; | |
| end | |
| reset <= 0; | |
| /* A magical value I know failed at one time. */ | |
| a <= 18'h3ff82; | |
| b <= 18'h04000; | |
| #5 clk <= 1; | |
| #5 clk <= 0; | |
| if (p !== 36'hfffe08000) begin | |
| $display("FAILED -- %h * %h --> %h", a, b, p); | |
| $finish; | |
| end | |
| for (idx = 0 ; idx < MAX_TRIALS ; idx = idx + 1) begin | |
| a <= $random; | |
| b <= $random; | |
| #5 clk <= 1; | |
| #5 clk <= 0; | |
| if (p !== ($signed(a) * $signed(b))) begin | |
| $display("FAILED == %h * %h --> %h", a, b, p); | |
| $finish; | |
| end | |
| end // for (idx = 0 ; idx < `MAX_TRIALS ; idx = idx + 1) | |
| $display("PASSED"); | |
| end // initial begin | |
| endmodule // main | |
| module MULT18X18S (output reg [35:0] P, | |
| input [17:0] A, | |
| input [17:0] B, | |
| input C, CE, R); | |
| wire [35:0] a_in = { {18{A[17]}}, A[17:0] }; | |
| wire [35:0] b_in = { {18{B[17]}}, B[17:0] }; | |
| wire [35:0] p_in; | |
| reg [35:0] p_out; | |
| assign p_in = a_in * b_in; | |
| always @(posedge C) | |
| if (R) | |
| P <= 36'b0; | |
| else if (CE) | |
| P <= p_in; | |
| endmodule | |