| // | |
| // Copyright (c) 1999 Steven Wilson (stevew@home.com) | |
| // | |
| // This source code is free software; you can redistribute it | |
| // and/or modify it in source code form under the terms of the GNU | |
| // General Public License as published by the Free Software | |
| // Foundation; either version 2 of the License, or (at your option) | |
| // any later version. | |
| // | |
| // This program is distributed in the hope that it will be useful, | |
| // but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| // GNU General Public License for more details. | |
| // | |
| // You should have received a copy of the GNU General Public License | |
| // along with this program; if not, write to the Free Software | |
| // Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA | |
| // | |
| // | |
| // SDW: Module instantiation with non-ordered port assignment | |
| // | |
| // D: Same as sdw_inst1 except using .net(net) port convention. | |
| // | |
| module test_mod (reset,clka,out); | |
| input reset; | |
| input clka; | |
| output out; | |
| reg out; | |
| always @(posedge clka or posedge reset) | |
| if(reset) | |
| out = 0; | |
| else | |
| out = ~out; | |
| endmodule | |
| module main(); | |
| reg reset,clk_0,clk_1; | |
| wire out_0,out_1; | |
| test_mod module_1 (.reset(reset),.clka(clk_0),.out(out_0)); | |
| test_mod module_2 (.reset(reset),.clka(clk_1),.out(out_1)); | |
| initial | |
| begin | |
| clk_0 = 0; | |
| clk_1 = 0; | |
| #1 reset = 1; | |
| # 2; | |
| $display("time %d r=%b, c0=%b, c1=%b, o0=%b,o1=%b\n",$time,reset,clk_0, | |
| clk_1,out_0,out_1); | |
| // Validate that both out_0 and out_1 are reset | |
| if(out_0) | |
| begin | |
| $display("FAILED - out_0 not reset\n"); | |
| $finish ; | |
| end | |
| if(out_1) | |
| begin | |
| $display("FAILED - out_1 not reset\n"); | |
| $finish ; | |
| end | |
| reset = 0; | |
| $display("time %d r=%b, c0=%b, c1=%b, o0=%b,o1=%b\n",$time,reset,clk_0, | |
| clk_1,out_0,out_1); | |
| # 2; | |
| clk_0 = 1; | |
| # 2; // Wait so we don't worry about races. | |
| $display("time %d r=%b, c0=%b, c1=%b, o0=%b,o1=%b\n",$time,reset,clk_0, | |
| clk_1,out_0,out_1); | |
| if(!out_0) | |
| begin | |
| $display("FAILED - out_0 didn't set on clk_0\n"); | |
| $finish ; | |
| end | |
| if(out_1) | |
| begin | |
| $display("FAILED - out_1 set on wrong clk!\n"); | |
| $finish ; | |
| end | |
| clk_1 = 1; | |
| # 2; // Wait so we don't worry about races. | |
| $display("time %d r=%b, c0=%b, c1=%b, o0=%b,o1=%b\n",$time,reset,clk_0, | |
| clk_1,out_0,out_1); | |
| if(!out_1) | |
| begin | |
| $display("FAILED - out_1 didn't set on clk_1\n"); | |
| $finish ; | |
| end | |
| if(!out_0) | |
| begin | |
| $display("FAILED - out_0 changed due to clk_0\n"); | |
| $finish ; | |
| end | |
| $display("PASSED\n"); | |
| $finish ; | |
| end | |
| endmodule |