| /* | |
| * Copyright (c) 2000 Stephen Williams (steve@icarus.com) | |
| * | |
| * This source code is free software; you can redistribute it | |
| * and/or modify it in source code form under the terms of the GNU | |
| * General Public License as published by the Free Software | |
| * Foundation; either version 2 of the License, or (at your option) | |
| * any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA | |
| */ | |
| /* | |
| * This program tests that a non-integer delay gets its extra | |
| * precision accounted for if the timescale supports it. In this | |
| * example, set the units to 1ms, but set the precision so that the | |
| * numbers can be given accurate to .1ms. This should cause a delay | |
| * of 2.4 and 2.6 to really be different. | |
| */ | |
| `timescale 1ms / 100us | |
| module main; | |
| reg clk; | |
| reg out1, out2; | |
| time time1; | |
| time time2; | |
| always @(posedge clk) #2.4 begin | |
| $display($time,, "set out1 == 1"); | |
| time1 = $simtime; | |
| out1 = 1; | |
| end | |
| always @(posedge clk) #2.6 begin | |
| $display($time,, "set out2 == 1"); | |
| time2 = $simtime; | |
| out2 = 1; | |
| end | |
| initial begin | |
| clk = 0; | |
| out1 = 0; | |
| out2 = 0; | |
| time1 = 0; | |
| time2 = 0; | |
| #1 if (out1 !== 0) begin | |
| $display("FAILED -- out1 is not 0: %b", out1); | |
| $finish; | |
| end | |
| clk = 1; | |
| #3 if (out1 !== 1) begin | |
| $display("FAILED -- out is not 1 at time 3: %b", out1); | |
| $finish; | |
| end | |
| if (time1 != 34) begin | |
| $display("FAILED -- time1 = %d", time1); | |
| $finish; | |
| end | |
| #1 if (time2 != 36) begin | |
| $display("FAILED -- time2 = %d", time2); | |
| $finish; | |
| end | |
| $display("PASSED"); | |
| end // initial begin | |
| endmodule // main |