| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2009 by Wilson Snyder. | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| clk | |
| ); | |
| input clk; | |
| integer cyc=0; | |
| reg [63:0] crc; | |
| reg [63:0] sum; | |
| // Take CRC data and apply to testblock inputs | |
| wire [2:0] in = (crc[1:0]==0 ? 3'd0 | |
| : crc[1:0]==0 ? 3'd1 | |
| : crc[1:0]==0 ? 3'd2 : 3'd4); | |
| /*AUTOWIRE*/ | |
| // Beginning of automatic wires (for undeclared instantiated-module outputs) | |
| wire [31:0] out; // From test of Test.v | |
| // End of automatics | |
| Test test (/*AUTOINST*/ | |
| // Outputs | |
| .out (out[31:0]), | |
| // Inputs | |
| .clk (clk), | |
| .in (in[2:0])); | |
| // Aggregate outputs into a single result vector | |
| wire [63:0] result = {32'h0, out}; | |
| // Test loop | |
| always @ (posedge clk) begin | |
| `ifdef TEST_VERBOSE | |
| $write("[%0t] cyc==%0d crc=%x result=%x\n",$time, cyc, crc, result); | |
| `endif | |
| cyc <= cyc + 1; | |
| crc <= {crc[62:0], crc[63]^crc[2]^crc[0]}; | |
| sum <= result ^ {sum[62:0],sum[63]^sum[2]^sum[0]}; | |
| if (cyc==0) begin | |
| // Setup | |
| crc <= 64'h5aef0c8d_d70a4497; | |
| sum <= 64'h0; | |
| end | |
| else if (cyc<10) begin | |
| sum <= 64'h0; | |
| end | |
| else if (cyc<90) begin | |
| end | |
| else if (cyc==99) begin | |
| $write("[%0t] cyc==%0d crc=%x sum=%x\n",$time, cyc, crc, sum); | |
| if (crc !== 64'hc77bb9b3784ea091) $stop; | |
| // What checksum will we end up with (above print should match) | |
| `define EXPECTED_SUM 64'h704ca23e2a83e1c5 | |
| if (sum !== `EXPECTED_SUM) $stop; | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| endmodule | |
| module Test (/*AUTOARG*/ | |
| // Outputs | |
| out, | |
| // Inputs | |
| clk, in | |
| ); | |
| // Replace this module with the device under test. | |
| // | |
| // Change the code in the t module to apply values to the inputs and | |
| // merge the output values into the result vector. | |
| input clk; | |
| input [2:0] in; | |
| output reg [31:0] out; | |
| localparam ST_0 = 0; | |
| localparam ST_1 = 1; | |
| localparam ST_2 = 2; | |
| always @(posedge clk) begin | |
| case (1'b1) // synopsys parallel_case | |
| in[ST_0]: out <= 32'h1234; | |
| in[ST_1]: out <= 32'h4356; | |
| in[ST_2]: out <= 32'h9874; | |
| default: out <= 32'h1; | |
| endcase | |
| end | |
| endmodule |