| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty. | |
| // | |
| module some_module ( | |
| input wrclk | |
| ); | |
| logic [ 1 : 0 ] some_state; | |
| logic [1:0] some_other_state; | |
| always @(posedge wrclk) begin | |
| case (some_state) | |
| 2'b11: | |
| if (some_other_state == 0) | |
| some_state <= 2'b00; | |
| default: | |
| $display ("This is a display statement"); | |
| endcase | |
| if (wrclk) | |
| some_other_state <= 0; | |
| end | |
| endmodule | |
| `define BROKEN | |
| module t1( | |
| input [3:0] i_clks, | |
| input i_clk0, | |
| input i_clk1 | |
| ); | |
| some_module | |
| some_module | |
| ( | |
| `ifdef BROKEN | |
| .wrclk (i_clks[3]) | |
| `else | |
| .wrclk (i_clk1) | |
| `endif | |
| ); | |
| endmodule | |
| module t2( | |
| input [2:0] i_clks, | |
| input i_clk0, | |
| input i_clk1, | |
| input i_clk2, | |
| input i_data | |
| ); | |
| logic [3:0] the_clks; | |
| logic data_q; | |
| assign the_clks = {i_clk1, i_clk2, i_clk1, i_clk0}; | |
| always @(posedge i_clk0) begin | |
| data_q <= i_data; | |
| end | |
| t1 t1 | |
| ( | |
| .i_clks (the_clks), | |
| .i_clk0 (i_clk0), | |
| .i_clk1 (i_clk1) | |
| ); | |
| endmodule | |
| module t( | |
| input clk0 /*verilator clocker*/, | |
| input clk1 /*verilator clocker*/, | |
| input clk2 /*verilator clocker*/, | |
| input data_in | |
| ); | |
| logic [2:0] clks; | |
| assign clks = {1'b0, clk1, clk0}; | |
| t2 | |
| t2 | |
| ( | |
| .i_clks (clks), | |
| .i_clk0 (clk0), | |
| .i_clk1 (clk1), | |
| .i_clk2 (clk2), | |
| .i_data (data_in) | |
| ); | |
| initial begin | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| endmodule |