| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2005 by Wilson Snyder. | |
| module t (clk); | |
| input clk; | |
| reg [0:0] d1; | |
| reg [2:0] d3; | |
| reg [7:0] d8; | |
| wire [0:0] q1; | |
| wire [2:0] q3; | |
| wire [7:0] q8; | |
| // verilator lint_off UNOPTFLAT | |
| reg ena; | |
| // verilator lint_on UNOPTFLAT | |
| condff #(12) condff | |
| (.clk(clk), .sen(1'b0), .ena(ena), | |
| .d({d8,d3,d1}), | |
| .q({q8,q3,q1})); | |
| integer cyc; initial cyc=1; | |
| always @ (posedge clk) begin | |
| if (cyc!=0) begin | |
| //$write("%x %x %x %x\n", cyc, q8, q3, q1); | |
| cyc <= cyc + 1; | |
| if (cyc==1) begin | |
| d1 <= 1'b1; d3<=3'h1; d8<=8'h11; | |
| ena <= 1'b1; | |
| end | |
| if (cyc==2) begin | |
| d1 <= 1'b0; d3<=3'h2; d8<=8'h33; | |
| ena <= 1'b0; | |
| end | |
| if (cyc==3) begin | |
| d1 <= 1'b1; d3<=3'h3; d8<=8'h44; | |
| ena <= 1'b1; | |
| if (q8 != 8'h11) $stop; | |
| end | |
| if (cyc==4) begin | |
| d1 <= 1'b1; d3<=3'h4; d8<=8'h77; | |
| ena <= 1'b1; | |
| if (q8 != 8'h11) $stop; | |
| end | |
| if (cyc==5) begin | |
| d1 <= 1'b1; d3<=3'h0; d8<=8'h88; | |
| ena <= 1'b1; | |
| if (q8 != 8'h44) $stop; | |
| end | |
| if (cyc==6) begin | |
| if (q8 != 8'h77) $stop; | |
| end | |
| if (cyc==7) begin | |
| if (q8 != 8'h88) $stop; | |
| end | |
| // | |
| if (cyc==20) begin | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| end | |
| endmodule | |
| module condff (clk, sen, ena, d, q); | |
| parameter WIDTH = 1; | |
| input clk; | |
| input sen; | |
| input ena; | |
| input [WIDTH-1:0] d; | |
| output [WIDTH-1:0] q; | |
| condffimp #(.WIDTH(WIDTH)) | |
| imp (.clk(clk), .sen(sen), .ena(ena), .d(d), .q(q)); | |
| endmodule | |
| module condffimp (clk, sen, ena, d, q); | |
| parameter WIDTH = 1; | |
| input clk; | |
| input sen; | |
| input ena; | |
| input [WIDTH-1:0] d; | |
| output reg [WIDTH-1:0] q; | |
| wire gatedclk; | |
| clockgate clockgate (.clk(clk), .sen(sen), .ena(ena), .gatedclk(gatedclk)); | |
| always @(posedge gatedclk) begin | |
| if (gatedclk === 1'bX) begin | |
| q <= {WIDTH{1'bX}}; | |
| end | |
| else begin | |
| q <= d; | |
| end | |
| end | |
| endmodule | |
| module clockgate (clk, sen, ena, gatedclk); | |
| input clk; | |
| input sen; | |
| input ena; | |
| output gatedclk; | |
| reg ena_b; | |
| wire gatedclk = clk & ena_b; | |
| // verilator lint_off COMBDLY | |
| always @(clk or ena or sen) begin | |
| if (~clk) begin | |
| ena_b <= ena | sen; | |
| end | |
| else begin | |
| if ((clk^sen)===1'bX) ena_b <= 1'bX; | |
| end | |
| end | |
| // verilator lint_on COMBDLY | |
| endmodule |