| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2008 by Wilson Snyder. | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| clk | |
| ); | |
| input clk; | |
| integer cyc=0; | |
| reg [63:0] crc; | |
| reg [63:0] sum; | |
| reg reset; | |
| reg enable; | |
| /*AUTOWIRE*/ | |
| // Beginning of automatic wires (for undeclared instantiated-module outputs) | |
| wire [31:0] out; // From test of Test.v | |
| // End of automatics | |
| // Take CRC data and apply to testblock inputs | |
| wire [31:0] in = crc[31:0]; | |
| Test test (/*AUTOINST*/ | |
| // Outputs | |
| .out (out[31:0]), | |
| // Inputs | |
| .clk (clk), | |
| .reset (reset), | |
| .enable (enable), | |
| .in (in[31:0])); | |
| wire [63:0] result = {32'h0, out}; | |
| // Test loop | |
| always @ (posedge clk) begin | |
| `ifdef TEST_VERBOSE | |
| $write("[%0t] cyc==%0d crc=%x result=%x\n",$time, cyc, crc, result); | |
| `endif | |
| cyc <= cyc + 1; | |
| crc <= {crc[62:0], crc[63]^crc[2]^crc[0]}; | |
| sum <= result ^ {sum[62:0],sum[63]^sum[2]^sum[0]}; | |
| reset <= (cyc < 5); | |
| enable <= cyc[4] || (cyc < 2); | |
| if (cyc==0) begin | |
| // Setup | |
| crc <= 64'h5aef0c8d_d70a4497; | |
| end | |
| else if (cyc<10) begin | |
| sum <= 64'h0; | |
| end | |
| else if (cyc<90) begin | |
| end | |
| else if (cyc==99) begin | |
| $write("[%0t] cyc==%0d crc=%x sum=%x\n",$time, cyc, crc, sum); | |
| if (crc !== 64'hc77bb9b3784ea091) $stop; | |
| `define EXPECTED_SUM 64'h01e1553da1dcf3af | |
| if (sum !== `EXPECTED_SUM) $stop; | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| endmodule | |
| module Test (/*AUTOARG*/ | |
| // Outputs | |
| out, | |
| // Inputs | |
| clk, reset, enable, in | |
| ); | |
| input clk; | |
| input reset; | |
| input enable; | |
| input [31:0] in; | |
| output [31:0] out; | |
| // No gating | |
| reg [31:0] d10; | |
| always @(posedge clk) begin | |
| d10 <= in; | |
| end | |
| reg displayit; | |
| `ifdef VERILATOR // Harder test | |
| initial displayit = $c1("0"); // Something that won't optimize away | |
| `else | |
| initial displayit = '0; | |
| `endif | |
| // Obvious gating + PLI | |
| reg [31:0] d20; | |
| always @(posedge clk) begin | |
| if (enable) begin | |
| d20 <= d10; // Obvious gating | |
| if (displayit) begin | |
| $display("hello!"); // Must glob with other PLI statements | |
| end | |
| end | |
| end | |
| // Reset means second-level gating | |
| reg [31:0] d30, d31a, d31b, d32; | |
| always @(posedge clk) begin | |
| d32 <= d31b; | |
| if (reset) begin | |
| d30 <= 32'h0; | |
| d31a <= 32'h0; | |
| d31b <= 32'h0; | |
| d32 <= 32'h0; // Overlaps above, just to make things interesting | |
| end | |
| else begin | |
| // Mix two outputs | |
| d30 <= d20; | |
| if (enable) begin | |
| d31a <= d30; | |
| d31b <= d31a; | |
| end | |
| end | |
| end | |
| // Multiple ORs for gater | |
| reg [31:0] d40a,d40b; | |
| always @(posedge clk) begin | |
| if (reset) begin | |
| d40a <= 32'h0; | |
| d40b <= 32'h0; | |
| end | |
| if (enable) begin | |
| d40a <= d32; | |
| d40b <= d40a; | |
| end | |
| end | |
| // Non-optimizable | |
| reg [31:0] d91, d92; | |
| reg [31:0] inverted; | |
| always @(posedge clk) begin | |
| inverted = ~d40b; | |
| if (reset) begin | |
| d91 <= 32'h0; | |
| end | |
| else begin | |
| if (enable) begin | |
| d91 <= inverted; | |
| end | |
| else begin | |
| d92 <= inverted ^ 32'h12341234; // Inverted gating condition | |
| end | |
| end | |
| end | |
| wire [31:0] out = d91 ^ d92; | |
| endmodule |