| // DESCRIPTION: Verilator: Check initialisation of cloned clock variables | |
| // | |
| // This tests issue 1327 (Strange initialisation behaviour with | |
| // "VinpClk" cloned clock variables) | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2018 by Rupert Swarbrick (Argon Design). | |
| // bug1327 | |
| // This models some device under test with an asynchronous reset pin | |
| // which counts to 15. | |
| module dut (input wire clk, | |
| input wire rst_n, | |
| output wire done); | |
| reg [3:0] counter; | |
| always @(posedge clk or negedge rst_n) begin | |
| if (rst_n & ! clk) begin | |
| $display("[%0t] %%Error: Oh dear! 'always @(posedge clk or negedge rst_n)' block triggered with clk=%0d, rst_n=%0d.", | |
| $time, clk, rst_n); | |
| $stop; | |
| end | |
| if (! rst_n) begin | |
| counter <= 4'd0; | |
| end else begin | |
| counter <= counter < 4'd15 ? counter + 4'd1 : counter; | |
| end | |
| end | |
| assign done = rst_n & (counter == 4'd15); | |
| endmodule | |
| module t(input wire clk, | |
| input wire rst_n); | |
| wire dut_done; | |
| // A small FSM for driving the test | |
| // | |
| // This is just designed to be enough to force Verilator to make a | |
| // "VinpClk" variant of dut_rst_n. | |
| // Possible states: | |
| // | |
| // 0: Device in reset | |
| // 1: Device running | |
| // 2: Device finished | |
| reg [1:0] state; | |
| always @(posedge clk or negedge rst_n) begin | |
| if (! rst_n) begin | |
| state <= 0; | |
| end else begin | |
| if (state == 2'd0) begin | |
| // One clock after resetting the device, we switch to running | |
| // it. | |
| state <= 2'd1; | |
| end | |
| else if (state == 2'd1) begin | |
| // If the device is running, we switch to finished when its | |
| // done signal goes high. | |
| state <= dut_done ? 2'd2 : 2'd1; | |
| end | |
| else begin | |
| // If the dut has finished, the test is done. | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| end | |
| wire dut_rst_n = rst_n & (state != 0); | |
| wire done; | |
| dut dut_i (.clk (clk), | |
| .rst_n (dut_rst_n), | |
| .done (dut_done)); | |
| endmodule |