| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2005 by Wilson Snyder. | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| fastclk, clk | |
| ); | |
| `ifdef EDGE_DETECT_STYLE // Two 'common' forms of latching, with full combo, and with pos/negedge | |
| `define posstyle posedge | |
| `define negstyle negedge | |
| `else | |
| `define posstyle | |
| `define negstyle | |
| `endif | |
| input fastclk; | |
| input clk; | |
| reg [7:0] data; | |
| reg [7:0] data_a; | |
| reg [7:0] data_a_a; | |
| reg [7:0] data_a_b; | |
| reg [7:0] data_b; | |
| reg [7:0] data_b_a; | |
| reg [7:0] data_b_b; | |
| reg [8*6-1:0] check [100:0]; | |
| wire [8*6-1:0] compare = {data_a,data_a_a,data_b_a,data_b,data_a_b,data_b_b}; | |
| initial begin | |
| check[7'd19] = {8'h0d, 8'h0e, 8'h0e, 8'h0d, 8'h0e, 8'h0e}; | |
| check[7'd20] = {8'h0d, 8'h0e, 8'h0e, 8'h0d, 8'h0e, 8'h0e}; | |
| check[7'd21] = {8'h15, 8'h16, 8'h0e, 8'h0d, 8'h0e, 8'h0e}; | |
| check[7'd22] = {8'h15, 8'h16, 8'h0e, 8'h0d, 8'h0e, 8'h0e}; | |
| check[7'd23] = {8'h15, 8'h16, 8'h0e, 8'h15, 8'h16, 8'h0e}; | |
| check[7'd24] = {8'h15, 8'h16, 8'h0e, 8'h15, 8'h16, 8'h0e}; | |
| check[7'd25] = {8'h15, 8'h16, 8'h0e, 8'h15, 8'h16, 8'h0e}; | |
| check[7'd26] = {8'h15, 8'h16, 8'h16, 8'h15, 8'h16, 8'h0e}; | |
| check[7'd27] = {8'h15, 8'h16, 8'h16, 8'h15, 8'h16, 8'h0e}; | |
| check[7'd28] = {8'h15, 8'h16, 8'h16, 8'h15, 8'h16, 8'h16}; | |
| check[7'd29] = {8'h15, 8'h16, 8'h16, 8'h15, 8'h16, 8'h16}; | |
| check[7'd30] = {8'h15, 8'h16, 8'h16, 8'h15, 8'h16, 8'h16}; | |
| check[7'd31] = {8'h1f, 8'h20, 8'h16, 8'h15, 8'h16, 8'h16}; | |
| check[7'd32] = {8'h1f, 8'h20, 8'h16, 8'h15, 8'h16, 8'h16}; | |
| check[7'd33] = {8'h1f, 8'h20, 8'h16, 8'h1f, 8'h20, 8'h16}; | |
| check[7'd34] = {8'h1f, 8'h20, 8'h16, 8'h1f, 8'h20, 8'h16}; | |
| check[7'd35] = {8'h1f, 8'h20, 8'h16, 8'h1f, 8'h20, 8'h16}; | |
| check[7'd36] = {8'h1f, 8'h20, 8'h20, 8'h1f, 8'h20, 8'h16}; | |
| check[7'd37] = {8'h1f, 8'h20, 8'h20, 8'h1f, 8'h20, 8'h16}; | |
| end | |
| // verilator lint_off COMBDLY | |
| always @ (`posstyle clk /*AS*/ or data) begin | |
| if (clk) begin | |
| data_a <= data + 8'd1; | |
| end | |
| end | |
| always @ (`posstyle clk /*AS*/ or data_a) begin | |
| if (clk) begin | |
| data_a_a <= data_a + 8'd1; | |
| end | |
| end | |
| always @ (`posstyle clk /*AS*/ or data_b) begin | |
| if (clk) begin | |
| data_b_a <= data_b + 8'd1; | |
| end | |
| end | |
| always @ (`negstyle clk /*AS*/ or data or data_a) begin | |
| if (~clk) begin | |
| data_b <= data + 8'd1; | |
| data_a_b <= data_a + 8'd1; | |
| data_b_b <= data_b + 8'd1; | |
| end | |
| end | |
| integer cyc; initial cyc=0; | |
| always @ (posedge fastclk) begin | |
| cyc <= cyc+1; | |
| `ifdef TEST_VERBOSE | |
| $write("%d %x %x %x %x %x %x\n",cyc,data_a,data_a_a,data_b_a,data_b,data_a_b,data_b_b); | |
| `endif | |
| if (cyc>=19 && cyc<36) begin | |
| if (compare !== check[cyc]) begin | |
| $write("[%0t] Mismatch, got=%x, exp=%x\n", $time, compare, check[cyc]); | |
| $stop; | |
| end | |
| end | |
| if (cyc == 10) begin | |
| data <= 8'd12; | |
| end | |
| if (cyc == 20) begin | |
| data <= 8'd20; | |
| end | |
| if (cyc == 30) begin | |
| data <= 8'd30; | |
| end | |
| if (cyc == 40) begin | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| endmodule |