| // DESCRIPTION: Verilator: Dedupe optimization test. | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty. | |
| // Contributed 2012 by Varun Koyyalagunta, Centaur Technology. | |
| module t(res,d,clk,en); | |
| output res; | |
| input d,en,clk; | |
| wire q0,q1,q2,q3; | |
| flop_gated_latch f0(q0,d,clk,en); | |
| flop_gated_latch f1(q1,d,clk,en); | |
| flop_gated_flop f2(q2,d,clk,en); | |
| flop_gated_flop f3(q3,d,clk,en); | |
| assign res = (q0 + q1) * (q2 - q3); | |
| endmodule | |
| module flop_gated_latch(q,d,clk,en); | |
| input d, clk, en; | |
| output q; | |
| wire gated_clock; | |
| clock_gate_latch clock_gate(gated_clock, clk, en); | |
| always @(posedge gated_clock) begin | |
| q <= d; | |
| end | |
| endmodule | |
| module flop_gated_flop(q,d,clk,en); | |
| input d, clk, en; | |
| output q; | |
| wire gated_clock; | |
| clock_gate_flop clock_gate(gated_clock, clk, en); | |
| always @(posedge gated_clock) begin | |
| q <= d; | |
| end | |
| endmodule | |
| module clock_gate_latch (gated_clk, clk, clken); | |
| output gated_clk; | |
| input clk, clken; | |
| reg clken_latched /*verilator clock_enable*/; | |
| assign gated_clk = clk & clken_latched ; | |
| wire clkb = ~clk; | |
| always @(clkb or clken) | |
| if(clkb) clken_latched = clken; | |
| endmodule | |
| module clock_gate_flop (gated_clk, clk, clken); | |
| output gated_clk; | |
| input clk, clken; | |
| reg clken_r /*verilator clock_enable*/; | |
| assign gated_clk = clk & clken_r ; | |
| always @(negedge clk) | |
| clken_r <= clken; | |
| endmodule |