| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2003 by Wilson Snyder. | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| clk | |
| ); | |
| // surefire lint_off _NETNM | |
| // surefire lint_off STMINI | |
| input clk; | |
| integer _mode; initial _mode = 0; | |
| wire [2:0] b3; reg [2:0] g3; | |
| wire [5:0] b6; reg [5:0] g6; | |
| t_func_grey2bin #(3) g2b3 (.b(b3), .g(g3)); | |
| t_func_grey2bin #(6) g2b6 (.b(b6), .g(g6)); | |
| always @ (posedge clk) begin | |
| if (_mode==0) begin | |
| _mode <= 1; | |
| g3 <= 3'b101; | |
| g6 <= 6'b110101; | |
| end | |
| else if (_mode==1) begin | |
| if (b3 !== 3'b110) $stop; | |
| if (b6 !== 6'b100110) $stop; | |
| _mode <= 2; | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| endmodule | |
| // Module gray2bin | |
| // convert an arbitrary width gray coded number to binary. The conversion | |
| // of a 4 bit gray (represented as "g") to binary ("b") would go as follows: | |
| // b[3] = ^g[3] = g[3] | |
| // b[2] = ^g[3:2] | |
| // b[1] = ^g[3:1] | |
| // b[0] = ^g[3:[SZ-1:0] cur0] | |
| module t_func_grey2bin (/*AUTOARG*/ | |
| // Outputs | |
| b, | |
| // Inputs | |
| g | |
| ); | |
| // surefire lint_off STMFOR | |
| parameter SZ = 5; | |
| output [SZ-1:0] b; | |
| input [SZ-1:0] g; | |
| /*AUTOREG*/ | |
| // Beginning of automatic regs (for this module's undeclared outputs) | |
| reg [SZ-1:0] b; | |
| // End of automatics | |
| integer i; | |
| always @(/*AUTOSENSE*/g) | |
| for (i=0; i<SZ; i=i+1) | |
| b[i] = ^(g >> i); // surefire lint_off_line LATASS | |
| endmodule |