| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2005 by Wilson Snyder. | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| clk | |
| ); | |
| input clk; | |
| reg [11:0] in_a; | |
| reg [31:0] sel; | |
| wire [2:0] out_x; | |
| extractor #(4,3) extractor ( | |
| // Outputs | |
| .out (out_x), | |
| // Inputs | |
| .in (in_a), | |
| .sel (sel)); | |
| integer cyc; initial cyc=1; | |
| always @ (posedge clk) begin | |
| if (cyc!=0) begin | |
| cyc <= cyc + 1; | |
| //$write("%d %x %x %x\n", cyc, in_a, sel, out_x); | |
| if (cyc==1) begin | |
| in_a <= 12'b001_101_111_010; | |
| sel <= 32'd0; | |
| end | |
| if (cyc==2) begin | |
| sel <= 32'd1; | |
| if (out_x != 3'b010) $stop; | |
| end | |
| if (cyc==3) begin | |
| sel <= 32'd2; | |
| if (out_x != 3'b111) $stop; | |
| end | |
| if (cyc==4) begin | |
| sel <= 32'd3; | |
| if (out_x != 3'b101) $stop; | |
| end | |
| if (cyc==9) begin | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| end | |
| endmodule | |
| module extractor (/*AUTOARG*/ | |
| // Outputs | |
| out, | |
| // Inputs | |
| in, sel | |
| ); | |
| parameter IN_WIDTH=8; | |
| parameter OUT_WIDTH=2; | |
| input [IN_WIDTH*OUT_WIDTH-1:0] in; | |
| output [OUT_WIDTH-1:0] out; | |
| input [31:0] sel; | |
| wire [OUT_WIDTH-1:0] out = selector(in,sel); | |
| function [OUT_WIDTH-1:0] selector; | |
| input [IN_WIDTH*OUT_WIDTH-1:0] inv; | |
| input [31:0] selv; | |
| integer i; | |
| begin | |
| selector = 0; | |
| for (i=0; i<OUT_WIDTH; i=i+1) begin | |
| selector[i] = inv[selv*OUT_WIDTH+i]; | |
| end | |
| end | |
| endfunction | |
| endmodule |