| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2012 by Wilson Snyder. | |
| /* Acceptable answer 1 | |
| created tag with scope = top.t.tag | |
| created tag with scope = top.t.b.gen[0].tag | |
| created tag with scope = top.t.b.gen[1].tag | |
| mod a has scope = top.t | |
| mod a has tag = top.t.tag | |
| mod b has scope = top.t.b | |
| mod b has tag = top.t.tag | |
| mod c has scope = top.t.b.gen[0].c | |
| mod c has tag = top.t.b.gen[0].tag | |
| mod c has scope = top.t.b.gen[1].c | |
| mod c has tag = top.t.b.gen[1].tag | |
| */ | |
| /* Acceptable answer 2 | |
| created tag with scope = top.t.tag | |
| created tag with scope = top.t.b.gen[0].tag | |
| created tag with scope = top.t.b.gen[1].tag | |
| mod a has scope = top.t | |
| mod a has tag = top.t.tag | |
| mod b has scope = top.t.b | |
| mod b has tag = top.t.tag | |
| mod c has scope = top.t.b.gen[0].c | |
| mod c has tag = top.t.tag | |
| mod c has scope = top.t.b.gen[1].c | |
| mod c has tag = top.t.tag | |
| */ | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| clk | |
| ); | |
| input clk; | |
| integer cyc=0; | |
| tag tag (); | |
| b b (); | |
| always @ (t.cyc) begin | |
| if (t.cyc == 2) $display("mod a has scope = %m"); | |
| if (t.cyc == 2) $display("mod a has tag = %0s", tag.scope); | |
| end | |
| always @(posedge clk) begin | |
| cyc <= cyc + 1; | |
| if (cyc==99) begin | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| endmodule | |
| module b (); | |
| genvar g; | |
| generate | |
| for (g=0; g<2; g++) begin : gen | |
| tag tag (); | |
| c c (); | |
| end | |
| endgenerate | |
| always @ (t.cyc) begin | |
| if (t.cyc == 3) $display("mod b has scope = %m"); | |
| if (t.cyc == 3) $display("mod b has tag = %0s", tag.scope); | |
| end | |
| endmodule | |
| module c (); | |
| always @ (t.cyc) begin | |
| if (t.cyc == 4) $display("mod c has scope = %m"); | |
| if (t.cyc == 4) $display("mod c has tag = %0s", tag.scope); | |
| end | |
| endmodule | |
| module tag (); | |
| bit [100*8-1:0] scope; | |
| initial begin | |
| $sformat(scope,"%m"); | |
| $display("created tag with scope = %0s",scope); | |
| end | |
| endmodule |