| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2014 by Wilson Snyder. | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| clk | |
| ); | |
| input clk; | |
| integer cyc=0; | |
| reg [63:0] crc; | |
| reg [63:0] sum; | |
| // Take CRC data and apply to testblock inputs | |
| wire [31:0] in = crc[31:0]; | |
| /*AUTOWIRE*/ | |
| // Beginning of automatic wires (for undeclared instantiated-module outputs) | |
| wire [15:0] out; // From test of Test.v | |
| // End of automatics | |
| Test test (/*AUTOINST*/ | |
| // Outputs | |
| .out (out[15:0]), | |
| // Inputs | |
| .in (in[31:0])); | |
| // Aggregate outputs into a single result vector | |
| wire [63:0] result = {48'h0, out}; | |
| // Test loop | |
| always @ (posedge clk) begin | |
| `ifdef TEST_VERBOSE | |
| $write("[%0t] cyc==%0d crc=%x result=%x\n",$time, cyc, crc, result); | |
| `endif | |
| cyc <= cyc + 1; | |
| crc <= {crc[62:0], crc[63]^crc[2]^crc[0]}; | |
| sum <= result ^ {sum[62:0],sum[63]^sum[2]^sum[0]}; | |
| if (cyc==0) begin | |
| // Setup | |
| crc <= 64'h5aef0c8d_d70a4497; | |
| sum <= 64'h0; | |
| end | |
| else if (cyc<10) begin | |
| sum <= 64'h0; | |
| end | |
| else if (cyc<90) begin | |
| end | |
| else if (cyc==99) begin | |
| $write("[%0t] cyc==%0d crc=%x sum=%x\n",$time, cyc, crc, sum); | |
| if (crc !== 64'hc77bb9b3784ea091) $stop; | |
| // What checksum will we end up with (above print should match) | |
| `define EXPECTED_SUM 64'h4afe43fb79d7b71e | |
| if (sum !== `EXPECTED_SUM) $stop; | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| endmodule | |
| module callee (input [7:0] port [7:0], output [7:0] o); | |
| assign o = ^{port[0], port[1], port[2], port[3], | |
| port[4], port[5], port[6], port[7]}; | |
| endmodule // callee | |
| module Test (/*AUTOARG*/ | |
| // Outputs | |
| out, | |
| // Inputs | |
| in | |
| ); | |
| input [31:0] in; | |
| output reg [15:0] out; | |
| wire [7:0] port [15:0]; | |
| wire [7:0] goodport [7:0]; | |
| always_comb begin | |
| port[0][7:0] = in[7:0]; | |
| port[1][7:0] = in[16:8]; | |
| port[2] = '0; | |
| port[3] = '0; | |
| port[4] = '0; | |
| port[5] = '0; | |
| port[6] = '0; | |
| port[7] = '0; | |
| end | |
| always_comb begin | |
| goodport[0][7:0] = in[7:0]; | |
| goodport[1][7:0] = in[16:8]; | |
| goodport[2] = '0; | |
| goodport[3] = '0; | |
| goodport[4] = '0; | |
| goodport[5] = '0; | |
| goodport[6] = '0; | |
| goodport[7] = '0; | |
| end | |
| callee good (.port(goodport), .o(out[7:0])); | |
| // This is a slice, unsupported by other tools, bug711 | |
| callee bad (.port(port[7:0]), .o(out[15:8])); | |
| endmodule |