| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2003 by Wilson Snyder. | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| clk | |
| ); | |
| input clk; | |
| integer cyc; initial cyc=1; | |
| // verilator lint_off GENCLK | |
| reg printclk; | |
| // verilator lint_on GENCLK | |
| ps ps (printclk); | |
| reg [7:0] a; | |
| wire [7:0] z; | |
| l1 u (~a,z); | |
| always @ (posedge clk) begin | |
| printclk <= 0; | |
| if (cyc!=0) begin | |
| cyc <= cyc + 1; | |
| if (cyc==1) begin | |
| printclk <= 1'b1; | |
| end | |
| if (cyc==2) begin | |
| a <= 8'b1; | |
| end | |
| if (cyc==3) begin | |
| if (z !== 8'hf8) $stop; | |
| //if (u.u1.u1.u1.u0.PARAM !== 1) $stop; | |
| //if (u.u1.u1.u1.u1.PARAM !== 2) $stop; | |
| //if (u.u0.u0.u0.u0.z !== 8'hfe) $stop; | |
| //if (u.u0.u0.u0.u1.z !== 8'hff) $stop; | |
| //if (u.u1.u1.u1.u0.z !== 8'h00) $stop; | |
| //if (u.u1.u1.u1.u1.z !== 8'h01) $stop; | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| end | |
| endmodule | |
| `ifdef USE_INLINE | |
| `define INLINE_MODULE /*verilator inline_module*/ | |
| `else | |
| `define INLINE_MODULE /*verilator public_module*/ | |
| `endif | |
| `ifdef USE_PUBLIC | |
| `define PUBLIC /*verilator public*/ | |
| `else | |
| `define PUBLIC | |
| `endif | |
| module ps (input printclk); | |
| `INLINE_MODULE | |
| // Check that %m stays correct across inlines | |
| always @ (posedge printclk) $write("[%0t] %m: Clocked\n", $time); | |
| endmodule | |
| module l1 (input [7:0] a, output [7:0] z `PUBLIC); | |
| `INLINE_MODULE | |
| wire [7:0] z0 `PUBLIC; wire [7:0] z1 `PUBLIC; | |
| assign z = z0+z1; | |
| l2 u0 (a, z0); l2 u1 (a, z1); | |
| endmodule | |
| module l2 (input [7:0] a, output [7:0] z `PUBLIC); | |
| `INLINE_MODULE | |
| wire [7:0] z0 `PUBLIC; wire [7:0] z1 `PUBLIC; | |
| assign z = z0+z1; | |
| wire [7:0] a1 = a+8'd1; | |
| l3 u0 (a, z0); l3 u1 (a1, z1); | |
| endmodule | |
| module l3 (input [7:0] a, output [7:0] z `PUBLIC); | |
| `INLINE_MODULE | |
| wire [7:0] z0 `PUBLIC; wire [7:0] z1 `PUBLIC; | |
| assign z = z0+z1; | |
| wire [7:0] a1 = a+8'd1; | |
| l4 u0 (a, z0); l4 u1 (a1, z1); | |
| endmodule | |
| module l4 (input [7:0] a, output [7:0] z `PUBLIC); | |
| `INLINE_MODULE | |
| wire [7:0] z0 `PUBLIC; wire [7:0] z1 `PUBLIC; | |
| assign z = z0+z1; | |
| wire [7:0] a1 = a+8'd1; | |
| l5 #(1) u0 (a, z0); l5 #(2) u1 (a1, z1); | |
| endmodule | |
| module l5 (input [7:0] a, output [7:0] z `PUBLIC); | |
| `INLINE_MODULE | |
| parameter PARAM = 5; | |
| wire [7:0] z0 `PUBLIC; wire [7:0] z1 `PUBLIC; | |
| assign z = a; | |
| endmodule |