| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // Copyright 2011 by Wilson Snyder. This program is free software; you can | |
| // redistribute it and/or modify it under the terms of either the GNU | |
| // Lesser General Public License Version 3 or the Perl Artistic License | |
| // Version 2.0. | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| clk | |
| ); | |
| input clk; | |
| real r, r2; | |
| integer cyc=0; | |
| task check(integer line, real got, real ex); | |
| if (got != ex) begin | |
| if ((got > ex ? got - ex : ex - got) > 0.000001) begin | |
| $display("%%Error: Line %0d: Bad result, got=%0.99g expect=%0.99g",line,got,ex); | |
| $stop; | |
| end | |
| end | |
| endtask | |
| initial begin | |
| // Check constant propagation | |
| // Note $abs is not defined in SystemVerilog (as of 2012) | |
| check(`__LINE__, $ceil(-1.2), -1); | |
| check(`__LINE__, $ceil(1.2), 2); | |
| check(`__LINE__, $exp(1.2), 3.3201169227365472380597566370852291584014892578125); | |
| check(`__LINE__, $exp(0.0), 1); | |
| check(`__LINE__, $exp(-1.2), 0.301194211912202136627314530414878390729427337646484375); | |
| check(`__LINE__, $floor(-1.2), -2); | |
| check(`__LINE__, $floor(1.2), 1); | |
| check(`__LINE__, $ln(1.2), 0.1823215567939545922460098381634452380239963531494140625); | |
| //check(`__LINE__, $ln(0), 0); // Bad value | |
| //check(`__LINE__, $ln(-1.2), 0); // Bad value | |
| check(`__LINE__, $log10(1.2), 0.07918124604762481755226843915806966833770275115966796875); | |
| //check(`__LINE__, $log10(0), 0); // Bad value | |
| //check(`__LINE__, $log10(-1.2), 0); | |
| check(`__LINE__, $pow(2.3,1.2), 2.71689843249914897427288451581262052059173583984375); | |
| check(`__LINE__, $pow(2.3,-1.2), 0.368066758785732861536388327294844202697277069091796875); | |
| //check(`__LINE__, $pow(-2.3,1.2),0); // Bad value | |
| check(`__LINE__, $sqrt(1.2), 1.095445115010332148841598609578795731067657470703125); | |
| //check(`__LINE__, $sqrt(-1.2), 0); // Bad value | |
| check(`__LINE__, ((1.5)**(1.25)), 1.660023); | |
| check(`__LINE__, $acos (0.2), 1.369438406); // Arg1 is -1..1 | |
| check(`__LINE__, $acosh(1.2), 0.622362503); | |
| check(`__LINE__, $asin (0.2), 0.201357920); // Arg1 is -1..1 | |
| check(`__LINE__, $asinh(1.2), 1.015973134); | |
| check(`__LINE__, $atan (0.2), 0.197395559); | |
| check(`__LINE__, $atan2(0.2,2.3), 0.086738338); // Arg1 is -1..1 | |
| check(`__LINE__, $atanh(0.2), 0.202732554); // Arg1 is -1..1 | |
| check(`__LINE__, $cos (1.2), 0.362357754); | |
| check(`__LINE__, $cosh (1.2), 1.810655567); | |
| check(`__LINE__, $hypot(1.2,2.3), 2.594224354); | |
| check(`__LINE__, $sin (1.2), 0.932039085); | |
| check(`__LINE__, $sinh (1.2), 1.509461355); | |
| check(`__LINE__, $tan (1.2), 2.572151622); | |
| check(`__LINE__, $tanh (1.2), 0.833654607); | |
| end | |
| real sum_ceil; | |
| real sum_exp; | |
| real sum_floor; | |
| real sum_ln; | |
| real sum_log10; | |
| real sum_pow1; | |
| real sum_pow2; | |
| real sum_sqrt; | |
| real sum_acos; | |
| real sum_acosh; | |
| real sum_asin; | |
| real sum_asinh; | |
| real sum_atan; | |
| real sum_atan2; | |
| real sum_atanh; | |
| real sum_cos ; | |
| real sum_cosh; | |
| real sum_hypot; | |
| real sum_sin; | |
| real sum_sinh; | |
| real sum_tan; | |
| real sum_tanh; | |
| // Test loop | |
| always @ (posedge clk) begin | |
| r = $itor(cyc)/10.0 - 5.0; // Crosses 0 | |
| `ifdef TEST_VERBOSE | |
| $write("[%0t] cyc==%0d r=%g s_ln=%0.12g\n",$time, cyc, r, sum_ln); | |
| `endif | |
| cyc <= cyc + 1; | |
| if (cyc==0) begin | |
| end | |
| else if (cyc<90) begin | |
| // Setup | |
| sum_ceil += 1.0+$ceil(r); | |
| sum_exp += 1.0+$exp(r); | |
| sum_floor += 1.0+$floor(r); | |
| if (r > 0.0) sum_ln += 1.0+$ln(r); | |
| if (r > 0.0) sum_log10 += 1.0+$log10(r); | |
| // Pow requires if arg1<0 then arg1 integral | |
| sum_pow1 += 1.0+$pow(2.3,r); | |
| if (r >= 0.0) sum_pow2 += 1.0+$pow(r,2.3); | |
| if (r >= 0.0) sum_sqrt += 1.0+$sqrt(r); | |
| if (r>=-1.0 && r<=1.0) sum_acos += 1.0+$acos (r); | |
| if (r>=1.0) sum_acosh += 1.0+$acosh(r); | |
| if (r>=-1.0 && r<=1.0) sum_asin += 1.0+$asin (r); | |
| sum_asinh += 1.0+$asinh(r); | |
| sum_atan += 1.0+$atan (r); | |
| if (r>=-1.0 && r<=1.0) sum_atan2 += 1.0+$atan2(r,2.3); | |
| if (r>=-1.0 && r<=1.0) sum_atanh += 1.0+$atanh(r); | |
| sum_cos += 1.0+$cos (r); | |
| sum_cosh += 1.0+$cosh (r); | |
| sum_hypot += 1.0+$hypot(r,2.3); | |
| sum_sin += 1.0+$sin (r); | |
| sum_sinh += 1.0+$sinh (r); | |
| sum_tan += 1.0+$tan (r); | |
| sum_tanh += 1.0+$tanh (r); | |
| end | |
| else if (cyc==99) begin | |
| check (`__LINE__, sum_ceil, 85); | |
| check (`__LINE__, sum_exp, 608.06652950); | |
| check (`__LINE__, sum_floor, 4); | |
| check (`__LINE__, sum_ln, 55.830941633); | |
| check (`__LINE__, sum_log10, 46.309585076); | |
| check (`__LINE__, sum_pow1, 410.98798177); | |
| check (`__LINE__, sum_pow2, 321.94765689); | |
| check (`__LINE__, sum_sqrt, 92.269677253); | |
| check (`__LINE__, sum_acos, 53.986722862); | |
| check (`__LINE__, sum_acosh, 72.685208498); | |
| check (`__LINE__, sum_asin, 21); | |
| check (`__LINE__, sum_asinh, 67.034973416); | |
| check (`__LINE__, sum_atan, 75.511045389); | |
| check (`__LINE__, sum_atan2, 21); | |
| check (`__LINE__, sum_atanh, 0); | |
| check (`__LINE__, sum_cos, 72.042023124); | |
| check (`__LINE__, sum_cosh, 1054.0178222); | |
| check (`__LINE__, sum_hypot, 388.92858406); | |
| check (`__LINE__, sum_sin, 98.264184989); | |
| check (`__LINE__, sum_sinh, -356.9512927); | |
| check (`__LINE__, sum_tan, 1.7007946043); | |
| check (`__LINE__, sum_tanh, 79.003199681); | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| end | |
| endmodule |