| // DESCRIPTION: Verilator: Verilog Test module | |
| // | |
| // This file ONLY is placed into the Public Domain, for any use, | |
| // without warranty, 2003 by Wilson Snyder. | |
| module t (/*AUTOARG*/ | |
| // Inputs | |
| clk | |
| ); | |
| input clk; | |
| // verilator lint_off COMBDLY | |
| // verilator lint_off UNOPT | |
| // verilator lint_off UNOPTFLAT | |
| // verilator lint_off BLKANDNBLK | |
| reg c1_start; initial c1_start = 0; | |
| wire [31:0] c1_count; | |
| comb_loop c1 (.count(c1_count), .start(c1_start)); | |
| wire s2_start = c1_start; | |
| wire [31:0] s2_count; | |
| seq_loop s2 (.count(s2_count), .start(s2_start)); | |
| wire c3_start = (s2_count[0]); | |
| wire [31:0] c3_count; | |
| comb_loop c3 (.count(c3_count), .start(c3_start)); | |
| reg [7:0] cyc; initial cyc=0; | |
| always @ (posedge clk) begin | |
| //$write("[%0t] %x counts %x %x %x\n",$time,cyc,c1_count,s2_count,c3_count); | |
| cyc <= cyc + 8'd1; | |
| case (cyc) | |
| 8'd00: begin | |
| c1_start <= 1'b0; | |
| end | |
| 8'd01: begin | |
| c1_start <= 1'b1; | |
| end | |
| default: ; | |
| endcase | |
| case (cyc) | |
| 8'd02: begin | |
| // On Verilator, we expect these comparisons to match exactly, | |
| // confirming that our settle loop repeated the exact number of | |
| // iterations we expect. No '$stop' should be called here, and we | |
| // should reach the normal '$finish' below on the next cycle. | |
| if (c1_count!=32'h3) $stop; | |
| if (s2_count!=32'h3) $stop; | |
| if (c3_count!=32'h5) $stop; | |
| end | |
| 8'd03: begin | |
| $write("*-* All Finished *-*\n"); | |
| $finish; | |
| end | |
| default: ; | |
| endcase | |
| end | |
| endmodule | |
| module comb_loop (/*AUTOARG*/ | |
| // Outputs | |
| count, | |
| // Inputs | |
| start | |
| ); | |
| input start; | |
| output reg [31:0] count; initial count = 0; | |
| reg [31:0] runnerm1, runner; initial runner = 0; | |
| always @ (posedge start) begin | |
| runner = 3; | |
| end | |
| always @ (/*AS*/runner) begin | |
| runnerm1 = runner - 32'd1; | |
| end | |
| always @ (/*AS*/runnerm1) begin | |
| if (runner > 0) begin | |
| count = count + 1; | |
| runner = runnerm1; | |
| $write ("%m count=%d runner =%x\n",count, runnerm1); | |
| end | |
| end | |
| endmodule | |
| module seq_loop (/*AUTOARG*/ | |
| // Outputs | |
| count, | |
| // Inputs | |
| start | |
| ); | |
| input start; | |
| output reg [31:0] count; initial count = 0; | |
| reg [31:0] runnerm1, runner; initial runner = 0; | |
| always @ (posedge start) begin | |
| runner <= 3; | |
| end | |
| always @ (/*AS*/runner) begin | |
| runnerm1 = runner - 32'd1; | |
| end | |
| always @ (/*AS*/runnerm1) begin | |
| if (runner > 0) begin | |
| count = count + 1; | |
| runner <= runnerm1; | |
| $write ("%m count=%d runner<=%x\n",count, runnerm1); | |
| end | |
| end | |
| endmodule |